Nissan Sentra SE-R: Best Short Shifter Install and Review!
Автокөліктер мен көлік құралдары
In my continuous journey to make this car as OEM+ as possible i dive in to short shifters once again. I was able to crisp up my shifting by using the following parts:
Gizfab Billet U-Joint
gizfab.com/product/k11-micra-gear-linkage-billet-uj/
Billet stabilizer bushing
gspec.com/p-7375-rear-shifter-stabilizing-bracket.aspx
Leo Lasalvia L2 Shifter
gspec.com/p-12926-l2-short-shifter.aspx
I hope this information helps you improve the shifting in your vehicle and the driving experience overall.
Пікірлер: 34
Great video man! I was having the same issues, especially not being able to get my car into reverse without popping a blood vessel lol... just hit up Leo and he will be sending me the less restrictive bearing as well. He was very helpful and super quick to reply. Definitely gained my business with how he's handled the situation. As for you, thanks for always helping the community carnal 🙏🏽
@blipshiftapex9047
11 күн бұрын
@@SR20DEEP I'm glad he was able to take care of you. This is why it's so important to make honest reviews of products! Leo is a stand up vendor and community member.
You're back!!! Glad the move went smooth. Perfect timing on my end, I'm taking a lunch break after literally just torquing down the cylinder head on my B13 SE-R.
@blipshiftapex9047
16 күн бұрын
Our content is best when consumed during bathroom breaks and lunch breaks I've been told 😂
@rsbatcrh06
16 күн бұрын
@@blipshiftapex9047 100% Love your content and commitment to the B13's. Small world info incoming, Matt Farah reviewed my SE-R before Zack drove yours. Regardless, i'm glad to know there's a short shifter out there that's OEM+ like you mentioned, and don't need to get the GIZGAB part unless i want it.
@blipshiftapex9047
16 күн бұрын
@@rsbatcrh06 nice! I remember your One take. The Gizfab is definitely optional. For my preference and this car the L2 shifter with stock u-joint was best. I have delrin bushing replacements in the works for the stock u-joint to give that extra crispness but retain OEM parts soon.
Looking forward to putting one in my 94 ser
@blipshiftapex9047
16 күн бұрын
You can't go wrong supporting a community member that makes these. 💪🏽
@Alexgoindoo21
16 күн бұрын
@@blipshiftapex9047 we might need someone to make rear caliper slide pins and boots.
@blipshiftapex9047
16 күн бұрын
@@Alexgoindoo21 those are still available new. Check rockauto.com
@Alexgoindoo21
15 күн бұрын
@@blipshiftapex9047 for some reason I’m not seeing them on rockauto.
@blipshiftapex9047
13 күн бұрын
@@Alexgoindoo21 you'll have to research online to find the part number and see if you can find them if rock auto doesn't have them
Love watching your videos if you don't mind I have a few sr20ve swap questions
@blipshiftapex9047
12 күн бұрын
You're always welcome to ask..
@user-et3jr4co6f
12 күн бұрын
@@blipshiftapex9047 I have a bone stock 92 se-r. 1 owner car down to the original title. It was mot well maintained. I came across a good deal on a ve. I do not have a ve harness or vs mass. I have matched up everything my de harness will work with. I have figured out how to wire upvthe vvl. The aac valve I do not have connection for. So can I use any of the de harness ecu mass or do I need to source all ve item ?
@blipshiftapex9047
11 күн бұрын
@@user-et3jr4co6f the Maf you use has to match the ECU you use. You will be using your stock harness to work with your VE. Everything pretty much is plug and play other than some heater hoses.
@user-et3jr4co6f
11 күн бұрын
Thank you i thought I was on the correct track.
Back in action!!! These look fantastic! Will the latest ones we want to purchase come with that less restrictive bearing? Are these and the shifter bushing available for purchase now from Greg V now?
@blipshiftapex9047
13 күн бұрын
I would get in contact with Greg to verify. The shifter bushings I will be producing and selling directly myself. The Gizfab piece link is in the description.
Not the heat shield nuts and the single bolt 🤣
@blipshiftapex9047
15 күн бұрын
I try not to take myself too seriously 😂
cool vid my man, think ill stick with stock tho, maybe upgrade the stabilizer idk
@blipshiftapex9047
16 күн бұрын
If you upgrade the rear stabilizer bushing make sure you have upgraded motor mounts or very fresh ones as the motor rocking back and forth with a solid rear bushing can cause linkages to snap.
@GameOfMorphs
16 күн бұрын
@@blipshiftapex9047 it's got poly mounts 😁
@blipshiftapex9047
16 күн бұрын
@@GameOfMorphs Fantastic. I will be coming out with delrin inserts for the OEM u-joint and shifter to make those who decide to keep the OEM shifter mod and just add that extra crispness to it.
@GameOfMorphs
16 күн бұрын
@@blipshiftapex9047 hell ya
@gknowfotos5372
15 күн бұрын
@@blipshiftapex9047 would definitely be interested in these. Assuming you'll post in the group when they're ready?
how do you get ahold of leo lasalvia? the same thing is on my car as it soo stiff!
@blipshiftapex9047
15 күн бұрын
You will want to contact him via Facebook. It's the fastest and easiest way to reach out to him
What State is this? Looks rural.
@blipshiftapex9047
10 күн бұрын
@@1208aa Tennessee