Well done Des, keep up the info and everyday running of your workshop. I started in a main dealer in Leeds [UK] 1968 and still at BMW main dealers 51years on, yes still on spanners. Like to hear all your advice and help keep it up.

Another informative video guys 🤙. It’s weird how Nissan released different Navara engines in different countries. Here in Australia the D 22 was the 3 litre ZD up until 2008. I have a 2008 2.5 D22 yd 25 Navara and it looks a fair bit different to the one in ur video. Myne still has the aluminium timing chain cover like that one but the fuel pump is higher up and the bay is a lot more crowded. Myne was made in Japan (vin no. Starts with jpn.) I have replaced the exhaust manifold, the big end seal ,the suction control valve, the transfer case seal and the injectors. I have also blanked the egr, installed a catch can, a secondary 2 micron fuel filter and a 3 inch exhaust with cat delete. If nothing else having a Nissan Navara has taught me a lot about working on a diesel. Your videos help heaps cheers!🤙🤙🤙 happy new year.

You are the best Engineer in the whole World. I got all your explanations well

@westyorkshireengineservice9160

2 жыл бұрын

cheers mate

Your channel is worth its weight in gold...... it may increase Nissan sales as a result because all these issues people are aware of and know to fix easily. Imagine doing the same on a Rangie. Thats Aussie for Range Rover.

Love you guys through and through.. I learned a lot from you guys from way around the world.

@westyorkshireengineservice9160

5 жыл бұрын

Thank you so much that was a very kind comment thank you so much for your support Happy new year to you and your family Thanks Des

Hey,Your videos are very usefull,can you make an v6 engine review?are they reliable?i ve read an older coment of you,saying that the 3.0l v6 ,V9X is a much better engine, than the 2.5 one.thank you

If you ever have problem like that again the filter inside of the high pressure pump is normally to blame, is an Alan key bolt on side of pump and is a mesh filter

Dang! Nissan makes a diesel? I'm from America, was unaware of this......... Excellent video mate.

@westyorkshireengineservice9160

5 жыл бұрын

You guys are lucky in the US we get the cheap shit end of the deal Thanks for watching Des

hello, 2006 model yd25 engine was rebuilt except for the fuel pump, the crank sensor was broken during assembly and we replaced it with a new equivalent brand, the engine is working properly but after a while the fault light is lit with error code 0077 p07, what is your advice.

Thank you very much Please tell me how to do Fuel Quantity Learning for Pathfinder R51 2013, with GST as Autel or Launch, not with Consult. Thank you

Hey mate just replaced my IP on a nissan caravan with a zd30di now its giving me a fault code 0702 tdc timing pulse but it runs beautifully I have replaced the fuel filter as it was full of slim. Could the pick up be block and give me this fault or is it a timing issue ? I'm quite confident that it is timed correctly

How I put the black color four hole coupling on to the shaft of diesel injection. Pump of ZD 30 for Nissan D22 ?

Who the he'll has disliked this, why would you do that when you have a guy who puts him self out to provide tips and tricks to help you save money on a vehicle which are problematic, shame on you

@westyorkshireengineservice9160

5 жыл бұрын

We get it all the time I would be worried if there more dislikes thanks all the best Des.

@robinbanks183

5 жыл бұрын

They are called Trolls mate. Type of people that need to be kept in asylums.

@westyorkshireengineservice9160

5 жыл бұрын

@@robinbanks183 thanks buddy

@johnwane4255

5 жыл бұрын

This so call good guy you seem to think you know has taken my $5500£ for and engine i ordered from him and its been ober 3 months now of bull shit. He is not replying to my emails or answering my calls he is a scamp

Hi... I have Nissan frontier 2005 yd 25, electric diesel pump and normal injectors, when i start the engine is running normal after a while the check engine sign comes on and white smoke start coming, also lost the engine power, when turn the engine off and start it the check engine sign leave and the engine running back normally, and than the error will come back after a while, I have changed all filters , clean diesel tank, use original system cleaners still have the same problem. Is it fuel pump failure ? need to be replaced or there are any more reasons for this case, Your help please. My best regards....

Hi west yorkshire how do you fix an injector knock on a yd25 D40 Navara i changed all 4 injectors i got the injectors from a path finder but it now have a knocking sound

When i travel w/ approx distance of 80kms and stop and let my D40 idle for more than 40mins it losses power and emit excessive black smoke, so i have to shut off the engine and have it cool for about one hour to regain its usual power..what is the real source of the problem?

Hi Des, I have a 1997 Nissan Terrano G3MR With a QD32 (etI) Engine that I purchased, and I need to fit the diesel pump back etc. Would you be so kind and send me a diagram showing the timing marks on the engine and injector pump Please. Thank You Kindly Kind Regards Mike

Happy new year too sir

@westyorkshireengineservice9160

5 жыл бұрын

To you the same sir, Thanks for watching Des

How too check your vacuum on your nissan caravan zd30 engine vibrate when shut off

hey mate, fan of yours, you helped me out big time with my shitbox pathfinder rebuild, bloody transmission is playing up now, drives fine till it gets to 4th then sticks in fourth gear, turn it off start it up its fine drive again gets to fourth, stuck agian, its a 2006 2.5 pathfinder auto, any suggestions? not that clued up on autos mate, thinking solenoid valve bank? your thoughts, cheers, mark.

@westyorkshireengineservice9160

5 жыл бұрын

Give me a call on that one as it is not that simple cheers Des

can i ask please i am striping down a nissan cabstar with yd25 engine, i set the cams at dtc but when i try to put the a 6mm locking pin in the fuel pump it does not seem to go in far not as deep as i see you push the screw driver in on the engine on the stand , should the locking pin go in a long way thanks

@westyorkshireengineservice9160

3 жыл бұрын

You may have to turn it slightly more just to get it all the way in

How to set up nissan 2006 frontier pipe to pump

Thank you very much for sharing this good info.

@westyorkshireengineservice9160

5 жыл бұрын

Thank you for your kind comment Des

Happy New Year

@westyorkshireengineservice9160

5 жыл бұрын

Cheers buddy and Happy New Year to you and your family all the best Des

Hi Mate can i ask is it same issue as the fault code shown P7- F / INJ TIMG FB?

@scrapyardmarkmetalpicker614

3 жыл бұрын

I have this same code fault .any idea what the problem is ?

Hey guys, you seem to have a lot of experience with Nissan, I have a problem with a 2006 pathfinder diesel, automatic. When it's in auto/4*4 while driving, the engine dies if I take my foot off the gas to brake, doesn't happen in 2*4, happens while at speed so no servos anymore, really dangerous to drive, 2 mechanics don't know what's wrong. No error codes, had a busted turbine reconditioned, DPF changed(aftermarket), battery is new, fluids are checked. What could be wrong?

@westyorkshireengineservice9160

5 жыл бұрын

Sounds like you have a few possible problems give me a call I will talk you through what you need to do cheers Des

@valentinursu1747

5 жыл бұрын

@@westyorkshireengineservice9160 :) ok, thank you, I'll try to search for your phone number on the net but I can't bring the car in, I'm about 2000 miles away :(

@westyorkshireengineservice9160

5 жыл бұрын

+44 0(1)484420930 email westyorkshireengines@gmail.com or find us on facebook, Cheers Des

I have a SD22 DIESEL I HAVE FAILD TO FIX AND IT HAS A WHITE SMOKE

SD 25 NISAN DESIEL ENGINE TIMING DIAGRAM PLEASE WE NEED A THAT VIDEO SO PLEASE I WILL REQUESTING YOU WE HAVE TO THAT MODEL ENGINE ORAL EXAST MANIFOLD AND ENTIC HAVE NOT A SECTION SO PLEASE REPLY ME

PUMP VP 44 is big merde ( i am old french mécano nissan) Good job amigo.

@westyorkshireengineservice9160

4 жыл бұрын

Thank you Sir (old english) Nice on mate cheers pal, Des

Hi Do you ever do any work on Nissan elgrand 3.2 td

@westyorkshireengineservice9160

3 жыл бұрын

shug2093 we have only worked on one buddy

@shug2093

3 жыл бұрын

@@westyorkshireengineservice9160 Hi mate I think got the same problem in your video.when I put ignition on ive got like a crackling noise coming from pump but when started revs on idle might go up and down but driving wise no problem then when warm idles spot on Thanks for replying

How did you diagnose it to be the fuel pump rather than the SCV? since the symptoms are similar thanks :] keep up the good work :]

@westyorkshireengineservice9160

5 жыл бұрын

D22 is a VP pump and has no scv so it was a simple fix Happy new year mate thanks for getting involved Des

@davenicholson3491

5 жыл бұрын

luke cooper he used a scan tool. It plugs into the ecu and the ecu tells the scan tool exactly where the fault is. U can get cheap scan tools of eBay for like 30 bucks that Bluetooth to your phone ( need the app to) . They’re called obd scan tools.

@ryanmg92

5 жыл бұрын

@@davenicholson3491 assuming your not actually a mechanic if you think the diagnostic tool just tells you exactly where the fault is

@davenicholson3491

5 жыл бұрын

Ryan Gelson oh ok

@davenicholson3491

5 жыл бұрын

Ryan Gelson no I’m not a mechanic

I have F/INJ F/B 2 error

I think the future is going to be for Chinese cars

@westyorkshireengineservice9160

5 жыл бұрын

Or may be USA

@jassimj8560

5 жыл бұрын

@@westyorkshireengineservice9160 Sorry to disappoint you.. Modern and future American products are really bad and only i can say they are shit...before 15 years and more America products were really good but i dont think they can get back to challenge Chinese cars in 2020

@westyorkshireengineservice9160

5 жыл бұрын

@@jassimj8560 Many thanks for your input in the subject we can only tell you about what we know about Nissan cheers Des

@jassimj8560

5 жыл бұрын

@@westyorkshireengineservice9160 thanks for your help in sharing your knowledge in nissan... I am currently working in all kind of cars brands and i dont like the way of famous brands making there products worst and worst in maintenence...while Chinese products improve day after day and there price are really challenging

@westyorkshireengineservice9160

5 жыл бұрын

@@jassimj8560 Good luck buddy in your future all the best Des

Where is my refund for the engine i payed for over 3 months ago????? You are not answering my emails and not taking my call i want my money back DES.

@janmoloney496

3 жыл бұрын

Oh you too John wane .... He has done this to many people. Contact me on Facebook... There are quite a few of us wanting our money back...