" Let's ignore that for now" ... " We just call that good" .. " Its weird having New stuff" Most relaxing Motto for Life I've ever heard😂😂😂

One thing I love about Low Buck Garage video's, you get a vehicle or project and when you find bits or parts missing, you are not phazed. You carry on and get to making it right. Other people seem to be a bit down about stuff like that.

@JesusThineBeTheGlory

7 ай бұрын

That's so true! I love his attitude. Today I had to weld my exhaust on and change the sump on my truck but watching lowbuck gives me relaxation because he's never phased by anything!

@majesticskeever

7 ай бұрын

@@JesusThineBeTheGlory i bet the people leaving planned parenthood you accosted would like relaxation too, funny about that

@JesusThineBeTheGlory

7 ай бұрын

@@majesticskeever Sorry I have no idea what you're on about. I'm English and live in Great Britain. We do not accost people here:

@Chris.8.8.

7 ай бұрын

​@JesusThineBeTheGlory I think majestic is another troll.

@beakittelscherz5419

5 ай бұрын

Ja, I noticed that too.. Watching Musti1 completely changed the way I look about wrenching now. He just laughs at everything that goes wrong and goes on. My dad was a man that always shouted and got angry when stuff did not work first try. Needless to say that I avoided learning anything from him after a while. It took me a long time to shake this negativity off. Nowadays, I allow myself more badshit goes wrong, and there is SO much more fun about that! You get tons of stuff done by being only 80% good at it, instead of waiting till you got 99% perfected. Making old machines run and then driving around with it just for shits and giggles... That's what's it all about.😁

My great grandfather was a fixer at the Oliver plant in Charles City Iowa for his entire working career. I like to think a little of the tinkering bug is genetic, from him.

That threaded pipe joint is almost 100% for a jib boom ….. looks like they used 2-7/8”s just get a joint of 2-7/8” drill stem and thread it into the joint and cut to your desired length letting you lift stuff higher than the loader frame can lift … while also increasing leverage and the center of gravity and possibly flipping the machine over. It’s fine..

@dennisfeero6965

6 ай бұрын

My tractor has a pipe on the top of the bucket just like that. It is for lifting and moving fifth-wheel RV trailers.

I have always really liked your saying James. "I wasn't having fun, so I knew I was doing wrong"...

The mechanical humor is epic! Opening up someone else's can of worms is always an eye-opener and good for a few laughs.

Hi, love the Wide Receiver speed to get to throttle lever at start up,, haha. Many thanks from UK. Really enjoy ALL your uploads.

Ah automotive education, an adventure of its own kind, a fascinating one, learning about past engineering and vehicular construction.

this great little tool found the right home for some loving. new to channel, I love it. Your sense of humour ticks all the boxes for entertainment, which is why I'm watching back to back videos to catch up on you. thanks again for great video

That's an awesome little rig! And it has to be the least amount of work you've had to do to get a new project running. And that makes it even more fun because now you've got some real incentive to keep going.

I think those were Maintenance Bees doing some general upkeep on your Nissan engine... Looks like they did a good job keeping it alive. You should take them on as staff.

Love the videos man keep them coming ❤❤

@daveapplequist4873

7 ай бұрын

I second that...

@robarcia2328

7 ай бұрын

@@daveapplequist4873I third it!🤣😂

@JimRyan-AKA-Pigeon_Kicker

7 ай бұрын

Is this the right time to say "Ditto" 🖖😎

Who knew having a real sized Tonka toy could be so much fun! I can see the little boy in you as you imagine filling that dumper truck - great video😃😃😎😎

So.......what are you going to use this for? If you are like me, you would say "I'll find something to do with it"! Cool little machine, glad you got it up and running without too much trouble.

I am obsessed with the old green camper bus you moved.....

Well Big Mike, you got yourself a nice piece of machinery for scrap price! It's been neglected for sure so just take it 1 piece at a time & slowly replace parts. You'll have some fun w/ it. Having been on an 8 N tractor 55 of my 71yrs I noticed your 3 point hitch articulates as it goes up & down. That's very unique. And the attachment appears to be a '' Plow Pan Buster". So I can certainly see why it came out of a field. Back befor bigger gas & Diesel tractors were prevalent a crawler was probably the only way to pull a pan buster, but like you said that crawler had too high of a low gear, and model A tranny's became scarce, so upgrading to 2Xhp was the next best thing. I wonder how well it worked out. 2 Cycle's lend to supercharging easily if you don't get crazy. Just add a small turbo & Voila'. Ha! Fine video Mr. Buck. Thanks for showing off your find. ben/ michigan

@JohnSmith-pl2bk

7 ай бұрын

This a a "normal" 4 stroke diesel engine.

looks like a fun project to strip all the way down and paint it all and make it look and work like new

Yes, yes, certainly a work of Art. Maybe the two of you can meet up some day...

Left, right, forward, backward, up, down... Win!

Another great video , I don't understand, his subscription should be in the millions

@JohnSmith-pl2bk

7 ай бұрын

A lot of YT vids have analytics that show 30% of the people who regularly watch...are subscribed! Now since he has 58k subscribers...add 70% to that and we have a theoretical 193k regular watchers.... 153k can't be bothered simply clicking "subscribe".....

In see those old dozers like that for sale once in a while. I wondered if parts for the undercarriage are available or you need to buy a donor one for parts

18:36… “let me attach my new handle”. I was thinking that I have those same handles.

Oh no!! Hes digging a pond!!! 👍👍

My brother had a company board f250 pickup truck, late '60s, brand spanking new from Ford to the dealer, they took out the Ford engine and put in a Datsun 4 cylinder diesel so they could use it underground in the limestone quarry. They had to install the slave cylinders for the clutch or it would creep through a stoplight intersection. Oh what a truck.

Love your analytic approach to help determine how much fun awaits 😅 Have fun and enjoy

What a cool little machine! Very unique, and with its little modern quirks, it is more powerful and you can find parts, like you said (and already did!). I think it would be very worthwile to go the full mile. New hoses, etc.. We all know you will! It will be awesome to watch you fix this up as well as the camper bus roof. Your channel has to "explode" soon, so to speak. I hope the best for you, my "top five" KZread channel author!! 👍🤩💥

I love that ol Oliver, nice feild/ barn find,😮thanks buddy thanks BigAl California

Dang I do t really like to comment on videos but this was just to cool . I absolutely love old mechanical stuff in this manner especially when someone is gonna refurbish it for actual work.

You have a good buy there, Go right through with this project and I believe you will have a great winner the punters will be biting your hand off for this

This is way too cool! the threaded pipe is to use as a lift boom.

Watching you run to lower the throttle cracks me up 😂 I can feel the urgency in your body language

3 minutes in and i love this. I like the way Art thinks!!

I like this dozer and the work you did to get it started and figuring out how to make control works. Change all tubes weld all cracks on bucket. and this machine needs a real paint job. I know you listed all things necessary first but this girl deserves a new dress. Amen

I respect your pragmatic approach. You organize problems from urgent to minor & tackle them 1 @ a time. Assessing as you go & sometimes reorganizing the list......cant wait for the next 1......

It’s been 10 days 👍waiting for a new video

That's a great project hope to see more of it in the future ,it reminds of your dad's little loader.

Coaxing life out of cadavers..BRAVO Determining its operating systems.. RAVO... Learning how to keep it alive...NOT NEEDED... IT WANTS TO LIVE...ITS OBEDIENT, .ITS WELL MANNERED ..IT NEEDS A FEW TRANSFUSIONS..... ART WAS VERY TALENTED...LOL

Can't wait to see more of this! The sd engines are durable, no timing belt no chain, all gears. For sure the cast iron head is a nice thing too. It's great to see one of them in something like this!

Another long awaited and much anticipated video! Thanks LBG

Two Thumbs-up, u got the motor to run.

My 2 cyl Isuzu diesel tractor uses that throttle plate as the shut down. You throttle down the engine to idle and then starve it for air until it stops. Detroit diesels had an emergency shut down damper in case the fuel rail got jammed or it started running on oil from broken turbo seal.

@JohnSmith-pl2bk

7 ай бұрын

On this Nissan that throttle body feeds a vacuum signal to the injection pump...it controls the quantity of the fuel being injected.

@4sl648

7 ай бұрын

@@JohnSmith-pl2bk Thats very interesting, thank you.

Cool Oliver dozer!

The bucket looks like it was made to scrape up cow manure. It's golden.....

Gotta love that Lord Humungus grille guard.

Please do a video showing the whole fleet please.

had a OC 3 that had been cobbeled severely. Straught dozer but came with a home made bucket and hoe bucket. Cracked piston but finally got it to run a little. Also it over heated in reverse. It would die an not start for days. It had a seized Hyster winch that was 4 sizes too big. I finally sold it to go to college (at 39) had three HG models too. One was a Cletrac, about 1939. They were all fun.

Had one at a job years back. Cracked block with a catch can. Was a useful and loyal machine

this video is amazing

I own one of these,pull that cover off the end of the final drive sprocket and check the lug nuts/bolts. They like to back off and sheer off and you can't see then with the dust cover on.

What a champion 🏆 That unit may have diff stearing. Looks kind of leathel useful from an Australian perspective. Keep your toes away from the chain!

Looks like you got one semi comfortable human meat grinder. Makes it more interesting👌

Excellent video Glenn :) also be interesting on that Oliver dozer was used on farm for Tile Drains feilds bleeding water out to septic tanks put trench then hoses to from hole in bucket for pipe and John Deere pick to on back ! Motor I know of Oliver used was Oshkosh in 4 and 6 cylinders gas or desiel motor like farm tractors had ! Also be cool see more on video's fix up Oliver Glenn and also used to possibly to! Also I know most Desiel motor turn key to on postion then push throttle to 1/4 on , glow plugs handle or button on for 30 seconds to 1 min then start button till fires let off glow plugs switch and start switch on starter! Then let warm for 10 mins ! Also some head lights plus cab fenders lights be cool put on see at night uses! Also roof plus roll cage too ! Hose are drie rotting called it Glenn should be fix up too agree or big showers of hot oil not fun ! But did well buy on it I say hopefully will seen more working on it! You like projects too Lol !

@JohnSmith-pl2bk

7 ай бұрын

The later Nissan 2.7TD that the USA never got has an extra water temperature sensor on the thermostat housing. The glow plugs turn on when you switch the key to the "run" position before starting it....and when the light goes out you can start the engine (I usually don't even have enough time to buckle my seat belt after turning on the key to the "Run" position until the glow plug light goes out and I turn the key to "start" ...which it does instantly) Then the sensor controls the glow plug relay and intermittently gives the glow plugs current until the coolant temp reaches 50C...which makes sure the engine keeps running and doesn't stall even on the coldest days) then switches the system off until the next start. Fully automatic Nissan system (from 1987 on)

You find the GREATEST projects 😮

I had one of those,it was heavily worn out but i replaced whatever i could..the engine finally quit so i put an engine/trans a flathead 4cyl from 46 willys cj2a

So cool how just a bit of tinkering and a few parts will get a machine that looked like it was unusable back in working condition.

Amazing that you found out about the extra transmission and all.. SO much to know about everything!!!! Cool tractor!

What a great projects ,I loved the HD Allis Chalmers at your Dad's place you played with over the summer great video's

This cool dude would totally win Monster Garage if it was still on

Nissan Diesel ------- You my friend are on a winner !!!!!

Really cool machine! In good condition too it seems.

THANKS, so nice you taking us thru this mostly sorted upgrade. Learned some new & interesting today😊

That loader is going to be a fun new project. I cant wait to see the great videos come out from it.

Absolutely the best on KZread.

Just started watching your channel. I learn things whilst being entertained! The perfect combo.

Sweet little piece of the old days. Well done to the guy that did the engine swap it worked out nice.

I like it! Andrew Camtara and Diesel Creak would be proud

You need this crawler in your life.

I'd love to have that beauty for digging around my 2 acre garden!

Excellent job as always, Garfield. However, it will now be expected for people to bow to it. 🇯🇵

Thanks for the great content. It always amazes me at the projects you find.

So cool! I love watching you do mechanics!

Its oddball machines that find love here on youtube. Thats what brings me here....lol....

You should start a Patreon so that we can give you money every month that you will never spend on stuff... The entertainment i get from this cra..., expert advice, will always be appreciated and well worth it. Like you said, its weird havin new stuff. I gotta great giggle outta that. Just sayin 🖖😎

I just about stood up and shouted when it moved! What a cool old machine.

That piece of pipe welded to the top of the bucket is awesome you are going to love it , for slings and chains lifting stuff . For loading stuff into a bin you tip the bucket forward and it pops the sling or chain off so you don't have to get off the tractor as much .

I just don’t understand why you don’t have a lot more subscribers

@JohnSmith-pl2bk

7 ай бұрын

A lot of YT vids have analytics that show 30% of the people who regularly watch...are subscribed! Now since he has 58k subscribers...add 70% to that and we have a theoretical 193k regular watchers.... 153k can't be bothered simply clicking "subscribe".....

Nice , seems like a worthy candidate for cleanup possibility for restoration !

Awsome episode !!!! Your videos are so easy to watch !! Feel free to make them longer !! Cheers from British Columbia Canada 🇨🇦

Thanks, i wish you are my Boss. See you working, looks realy chill, and smart… Have fun, i will thanks to you..😁😉

A great little machine. Those hydraulic hoses are another story. Could get expensive. In either hoses or spilled message oil.

cool little loader i know you will have it running in tip top condition cant wait to see what becomes of this machine in the future ,stay tuned

Looking forward to the next one. The hydraulic fluid looks like the fire proof type we us in the Die Casting Industry.

Excellent choice in machinery. Love it.

The round device on the side of the fuel injection pump is the hand priming pump. Screw down when not in use. The Governor is a pneumatic type and depends on the vacuum from the throttle body on the inlet manifold.

You are a very gifted man. Love your videos. Best wishes.

Great vid and work, I hope you get this project crawling along 👍💨💨

Awesome - u got “the work of art” functioning in no time

Funny stuff AND I'm not the only person who repurpose old socks for rags !

You are a very intelligent young man. Excellent video.

Nice hit! That can come in real handy for future projects.

Cool find

Love your videos (new subscriber). Change those hoses before you or someone around you gets hurt. Hydraulic oil under the skin is no joke. If I lived closer I'd make them all for you free, just to keep it low buck for ya. Of course though, you would have something to new looking on that beautiful machine. On a side note, never get paint on your hose (there's a pun there) it'll make them dry rot faster than the NM sun.

12:05 did bees just fly out of the exhaust 😂😂😂

I absolutely love this tractor.

Art sure did a good job there

I was going to stop by and ask you what you were doing with the two tracked vehicles you had next to your shop. They looked pretty cool.

Im liking that little dozer. Great video

nice... bringing old junk back to life!

Talented - So much fun - With a great sense of humor!

You dropped lucky there mate, that’s a dandy little loader :o) Good tracks and sprockets for the win.