Eric you are the goat of g35 repairs!! I have used your videos for so many things and you have helped me so much!

@ERICSDIYGARAGE

11 күн бұрын

Thank you I appreciate the support!

Thanks... I can confirm this is an excellent guide as I did this myself a few months ago. Everything here is very clear.

@ERICSDIYGARAGE

Жыл бұрын

Thank you!

@Icecreameliora

11 ай бұрын

You’re smoked out once I heard drain plug I knew this was bs I’ve done it without removing any coolant lmao

@ERICSDIYGARAGE

6 ай бұрын

Maybe you should make a video and show us all how you got the long 14mm bolt out without removing the fans

Very good video easy to understand and very informative he knows what up thank you

Awesome Eric. I just keep saving all your videos in a Eric file. I finished my front suspension next will be the rear. I’ll be in touch. Lol. Merry Christmas

@ERICSDIYGARAGE

Жыл бұрын

Thank you for the support!

good tactics of which part to tackle first. good job mang!

@ERICSDIYGARAGE

11 күн бұрын

Thanks!

Any advice on replacing top front freeze plug? Thanks in advance and happy holidays.

I'm in the process of rebuilding my neighbors 04 350z I'm fighting with the alternator and the transmission cooler lines that run along side it and near the belt tensioner. My question is were do the hard lines attach to.

@ERICSDIYGARAGE

8 ай бұрын

They come from the side of the transmission and go to the radiator to get cooled

Do you guys know where on the 07 350z hr what the 3 wires coming of the connector are

@ERICSDIYGARAGE

Ай бұрын

Voltage regulator

@timberhill2675

Ай бұрын

@@ERICSDIYGARAGE okay so does the black wire?

@ERICSDIYGARAGE

Ай бұрын

@timberhill2675 I'm sure it's a ground. I don't know what each color does

@timberhill2675

Ай бұрын

@@ERICSDIYGARAGE where is the regulator

Which alternator do you recommend? Any link to the one you selected by chance?

@ERICSDIYGARAGE

8 ай бұрын

I would strongly recommend a new vs remanufactured. I don't have good luck with autozone, so try O'Reilly's

Super helpful 🙏🏽

@ERICSDIYGARAGE

8 ай бұрын

Thank you!

whats the reasoning to even drain the coolamt? does it just help keep it clean when ou removed the hoses on top?

@ERICSDIYGARAGE

8 ай бұрын

You only need to drain a small amount of coolant if you don't want to do that remove the hose but you will make a bigger mess

@autograph415

8 ай бұрын

@@ERICSDIYGARAGE good to know thanks, hoping to do this on my coupe tomarrow

@autograph415

8 ай бұрын

@@ERICSDIYGARAGE now another question, its been a while since ive bled the air out of my system, i do have a spill proof funnel for bleeding the system, but do i need to keep the bleeder valve open while bleeding the air? or do i keep it closed

@ERICSDIYGARAGE

8 ай бұрын

@autograph415 a spill free funnel will help but it's not nessary. Since you Wong remove all the coolant you will just need to top off. You only really need to bleed the air out when you completely drain the radiator or remove the thermostat. Since it's only a little that you will take out refill and let it get up to temperature than shut it off and let it cool down and top it off again and you should be fine

@autograph415

8 ай бұрын

@@ERICSDIYGARAGE okay good to know thanks i assumed anytime coolant was readded to the top of the radiator, or hoses were disconnected and reattached that air was automatically in the system and needed drained, thanks

Man, it will be really nice if you show the torque specs for when you putting everything back together and not just skipping over it I hate looking at forms

@locophoto6881

2 ай бұрын

Time to grow up dude …way way too lazy if you will literally take the time to complain to a guy that just spent hours helping you when in that same amount of time it takes to complain you could’ve googled the torque specs

@ERICSDIYGARAGE

2 ай бұрын

I couldn't of said it better myself

0

Torque specs

@ERICSDIYGARAGE

5 ай бұрын

You should be able to find them on the forums online

@luisfigueroa2011

5 ай бұрын

@@ERICSDIYGARAGE Thank you so much for the video Eric. I followed the same procedure for my O3 fx35. That bracket on the back of the alternator was a SOB, but with your approach I was able to do it. Thanks again! 👍🏼

He skipped the most difficult part how to remove the pigtail clip against the firewall👎👎👎👎

@ERICSDIYGARAGE

6 ай бұрын

If depressing a pigtail is the hardest part for you, maybe you shouldn't attempt to replace the alternator

Pretty sure you can remove the fan without removing the hose just force it you won’t hurt the rubber Lmaoo what a waste of time

@ERICSDIYGARAGE

8 ай бұрын

No you are wrong lol

@Icecreameliora

8 ай бұрын

well i did it soooooo@@ERICSDIYGARAGE

@user-nw1rq7ic2v

7 ай бұрын

Very good video precise and formative he doesn't let you make mistakes like leaving battery connected thank you very much

@user-nw1rq7ic2v

7 ай бұрын

How do I get to your other videos? THANK U 4 alternator vidio saved me a lot of time!

@ERICSDIYGARAGE

6 ай бұрын

I wonder why you watched the video, if you know so much🤔