400sx

Toyota is the best for engines!

@pushhrodd01

3 жыл бұрын

@@boostyboi2550 obviously everyone knows they’re shit

wow i thought this video was filmed in L.A. until I heard some chuchadas xD.. Nice work

i guess they have to change the fast and the furious lines - 1UZ no shit!

1UZ is lighter than 1JZ

@devantebowers8597

3 жыл бұрын

And 2JZ too. But it just doesn't get as much love.

@aaronseward8647

3 жыл бұрын

@@devantebowers8597 and not enough aftermarket support

@vinyl_2784

Жыл бұрын

@@aaronseward8647 still much cheaper than a 1j or 2j

@aaronseward8647

Жыл бұрын

@@vinyl_2784 True, I miss my gs 400 with a 1uz, plenty power for me

Excelente trabajo, con que ECU lo controla?

This video convinced me to go 1uz and dont regret a thing

@CarsyTuning

4 жыл бұрын

Happy to know!

what is (or was..who knows..late comment lol) the exhaust setup on there?

The LS1 is a universal engine in a sense that it is a crate engine. Can be bought for whatever build you want. And comes in many different models and makes around the world as a factory fitted V8...

@hoodiedrifts3994

4 жыл бұрын

BryceMR2SW20 also expensive

What tire size your running around ?

@brind0g yes it has a r154 attached.

Great video :) i'm building one too 1uz-fe for event porpose, i would like to know what is the final drive gear ratio in that 200sx?

Just like mine!! Wicked!! Love the paint job on the motor.. Is it manual?

@thectptrenchfoot this is not a dodge engine its lexus/toyota

What rims where this I want them

About to do a 1uz swap in my car for 3k I can't wait!

@afgarage1420

7 жыл бұрын

I'm getting a truck and putting one in, how has it worked out?

@sayso1268

4 жыл бұрын

Turbo Garage did you do it?

@matiissgrislis5174

3 жыл бұрын

Did u do it? only 3k? thats cheap for a v8 seap

@memetrashbin3061

3 жыл бұрын

I did a 1uz swap in my Nissan Silvia it went wel for 4 k

what trans?

love this video... still has 4 lug (like me) still sitting higher than shit (like me) and its the only non drift 1uz s13 video i've seen. i'd love to see more highway pulls and shit like that but GREAT VIDEO

thanks for showing everyone just how important periods are...

Not gonna lie it low key sounds like my straight piped 7MGTE

Great engine :D I own one :) Greetings from Poland :)

@dorrel1020

3 жыл бұрын

Polędwica v8? Nieźle

@PolonezV8

3 жыл бұрын

@@dorrel1020 :) Tylko mój 1UZ-FE jest w ostatniej generacji z VVTi. Niby najmocniejszy ale najgorszy pod dmuchanie bo pierwsa generacja miała pancerne korby. Pozdro ;)

Almost done getting the 1uz into my s13 hatch! This video got me even more excited

is it green with a huge blue sticker on the doors?

does any one know what i can do make my gs/400 just ah lil bit tougher with out dropping a wald of cash out on it

3:12 :)

Indeed, actually ca18det with trans (factory engine) = 389lbs 1uzfe with r154 trans = 486lbs sr20det with trans (common swap) = 490lbs not bad for an engine double the capacity..

why not an LS series?

You can tell by listening to it.

it doesnt matter how heavy a damn engine in a 240 weighs these cars have tons of after market support to cope with virtually any issue, besides theres lots of 240s that drift perfectly with v8 engine swaps. plus the s chassis are very beefy up front naturally by research

o you can read. round of applause

98-00 Lexus SC400 motor would be great. Thats what I have in my silvia.Its not turbocharged like the sr20det but it produces 300hp and 300 lbs of torque.Engine performance is very similar to that of the Supra 2jz turbo engine,except its not turbo

in chile, of course :D

Auto or manual?

is this a legal swap?

AGREED

vortech ones are also available :D

sound like american muscle,, nice

would be sick if they made a kit to make this engine a flatplane crank v8

@draggonhedd

10 жыл бұрын

I thought it already was.

@BaileyEvans

10 жыл бұрын

doesn't sound like it to me? could be wrong though.

@JHsadler

10 жыл бұрын

Then it'd sound worse?

@SuperWesty177

10 жыл бұрын

draggonhedd Nope its a classic 90 degree v8.

@CarsyTuning

10 жыл бұрын

SuperWesty177 True

Center tail light says 200sx.

because my original post so looked like a paragraph. -.- lol way 2 go

except this one doesn't have pushrods.

If you want a v8 in a s13/s14 why not go with the VH45det..? It's like the most acknowledged v8 JDM wise. Also lighter than the RB and SR

Sr20DET =149kg 685 mm long 1uzfe=175kg 700 mm long 26kg and 15mm longer is nothing especially with after market suspension

I`ve been doing the same swap in Poland :) unfortunately I got problem with the engine and cannot find anybody in Poland to solve it :/ It stops few seconds after the start - y`all can see it on ma channel. If anybody has the idea whay please help me out.

I will thumbs up this time, but you better not put another v8 in a 240 lol

I have this engine how could i make it faster ?

@Zac1_

8 жыл бұрын

Super charger

@AxelRTas97

8 жыл бұрын

+‫طلال خالد‬‎ Turbo, ECU tuning, etc.

@sircampos94

8 жыл бұрын

+‫طلال خالد‬‎ twin butterfly turbo charge

@FrameBanginKyle

8 жыл бұрын

Naturally aspirated you can do simple Kelford cams, head port and polish, intake manifold port and polish, intake, full exhaust. Mild tune. Alternatively, you can run ITB's for more throttle responce. If you go boost, make sure to get the phase 1 or first generation 1uzfe which has stronger/thicker rods, and either supercharged or turbocharged will create power, every motor has its limits.

@akdrifting

8 жыл бұрын

Turbo... see my channel

I guess now it's very front heavy and has quite the understeer, doesn't it?

@kacpernadolski2000

8 ай бұрын

Nope. The v8 is aluminium so it weighs around 170-180kg

my 1u gets like 17 street

Because the 1uz is easier to find, cheaper, makes more power, and is pretty bulletproof.

400SX*

japanese muscle.

The good old days when these were like $300

glsd to see a v8 though, way to many people have sr20 and rb25's. V8's are simpler, better on gas, more reliable, etc

@willholland5351

6 жыл бұрын

SupramanTRD definitely not true that’s for 4 cylinders

japanese car, japanese engine.

Put a RB26DETT inside.. amazing sound :D

un 200sx sin el ca18det no es un nissan 200sx!!!

r154

Just because you slaped in another engine with more cubic inches dose not meen you are going to have more horse power under the hood with out tuning and balancing it too.

@CarsyTuning

10 жыл бұрын

Thats right Longduck Chong , this car is used to drift and auto-cross events. Greetings!

@Kuson2

9 жыл бұрын

There will definitely be more torque

@CarsyTuning

9 жыл бұрын

I think that's the point of the swap, greetings!

@march11stoneytony

8 жыл бұрын

Assuming they swapped the ecu too no tuning would be necessary

@andrewcastro5054

6 жыл бұрын

so youre saying swapping a bigger v8 into a car that came with a 4 cylinder wouldnt make more power than it did? lol even without tuning it would make a huge difference stock KA dual cam made 140hp on a good day and im talking a healthy KA compared to the 1uz that makes 270 hp and around 250 tq and weighs less than a 100 lbs more , that car is definitely going to be alot faster ,,, and yes i know the comment is 3 years old

how is a 1uz better on fuel then a sr20 ahaha......

damn the front of the car must be heavy as fuck

Doesn't sound like this is the US and cost wise, US has the cheapest price on US motors compared to other countries where you can buy Toyota V8s from junk trucks.

a 350 bhp SR20 would like that, and it front heavy

yeah sure it's louder. but a 4 inch fart can doesn't make your car faster.

Right ! Please dont lol

as much as I like the 1uz it belongs in some kind of toyota like a pickup, old celica, or ae86 corolla for a 240sx the ls1 works better because its a universal engine

@abymondesir23

4 жыл бұрын

Um no

LOL 3:00

Cool that its got a 1uz swap, but it looks like a piece of crap

@akdrifting

8 жыл бұрын

just drop a turbo at it. 333whp @ only 5psi

nah, man. VH45.

gay

Boring

what the fuck do you mean loud? my eclipse gst was louder than that shit

A dodge engine in a nissan? -_-

@elbenja0088

5 жыл бұрын

Is a TOYOTA engine...