My oled switch.. very happy with the service.

@Shady_Bliss

Жыл бұрын

Could you DM where you bought the OLED hyfly, please?

@kostassarakinos3062

Жыл бұрын

You can buy them on Ali

@8bitsamurai6

Жыл бұрын

Funny ur shady. Dont be doing any shady with switch. How much does he charge for this service?

Thank you for this video. I stumbled upon it browsing KZread. I found the whole procedure a very interesting watch.

Great video buddy 👊🏼😎👍🏼!!! Im having the same problem.. great to hear ,that there's a solution for this.😁.

Thank you for the video, i already finish the mod and as you say "its working! its working", thank you so much i suggest you to insert the temperature that you use for the hot air and iron solder.

nice music at the end ! also good video , greetings

Beautiful job.

Hi sir, Thank you for the great video. I just have few questions. What cables should I buy to connect the dots? I can't buy AWG 34-36 in my country. Only AWG 30. Is that okay too? Or which special wire do you recommend? Also, again, thank you so much for this video. You are the only one that explains like everything just perfectly. Out of all hwfly welding "tutorials" this one is the BEST. Subscribed!

@tvpartsworld806

Жыл бұрын

You should use 0.1mm enamelled copper wire. Here is a link for it : www.ebay.co.uk/itm/185192402954?hash=item2b1e53d00a:g:zd4AAOSwd~xhpjSt all awg wires are a bit difficult to solder them and shape them.

@kraither4649

Жыл бұрын

@@tvpartsworld806 I just ordered a 0.1mm Enameled copper wire. Thank you so much!!!!

@Dillon12123

Жыл бұрын

What soldering iron do u use?

Great job ! That is extremely impressive ! 👌🏼👍🏻

Excellent video. The secret lies in the 36AWG enamelled copper wire for D & A . Thicker wires hang heavy on the tiny joints and do not make a good solder joint. We can use 30AWG for GND, 3.3v and C. I blew a CLK point doing exactly what you tried with the red wire, used the 30AWG which is not good for a good CLK connection.

buen video ,, duda que temperatura para soldar adaptador de la nand ?? PD : calidad del video superior muchas gracias 😀

Hello, do you have an Amazon link for that coded copper wire you used in the video? I want to make sure I get the right one so I won't damage my switch, also you video is amazing, Many thanks!!!

Hi! I would like to know if with the Switch modchip, if I won't need to buy another, more recent and updated chip later on, to be able to run the games that are released over time?

Good job! Could you tell me please, is be ok using just soldering dryer without bottom warming? And what temperatire must be in celsius on soldering dryer? Thank you.

Hi, great job, what is the cost of this service? Thanks

So, I was like wondering at 6:45 you test the connection, but I can't see what you're putting your probe on for the second point. If I'm asking a dumb question please forgive me😖. I'm like totally new to this type of chip and while I've modded other systems that involve soldering (Xbox, Xbox 360, PS3 etc...), I find myself totally lost as to the specifics of this installation process (can't find good resources in English😜). What resources did you use to first install the HWFLY chip or was it mostly by understanding the system? Also would this video mostly work for the v4.1 HWFLY as well? Sorry for the super long post😋 Thanks for your time😆

@tvpartsworld806

Жыл бұрын

Hi. Black probe on the ground point (charging port or other), red probe on the point you’d like to measure. Installation of these chips are always the same. The difference is only the ribbon tapes included in the set. Some of them are different shape etc. but the method is the same . You just need to find all the points (B,C,D,3.3v, ground, and 2 points on APU)on the motherboard and connect them to the chip. Before they released the Oled version , I was familiar with the older installations on the Switch and Switch lite, so this wasn’t a problem as it’s similar to the Oled.

Hello, I have a question, I hope you can help me, what are the files that are installed inside the microsd? Apart from hekate and atmosphere, I know that sxcore needs an important file which was boot.dat, but hwfly is different, does it need another essential file? pd: sorry for my bad english

@tvpartsworld806

Жыл бұрын

Hello. In the main root of the sd card you should place the hekate.bin or other bin file but you need to rename it first to payload.bin

@jorgep3796

Жыл бұрын

@@tvpartsworld806 Thank you

@user-nc4wt6yu8j

Жыл бұрын

@@tvpartsworld806 do you live I. USA

Is it smart to apply hot glue on each soldered point on the pcb?

friend, could you tell me the configuration of the heat station to fix the dat0 cable on the chip, I am Brazilian, I am your follower

I too would like the option to back-up my system and have found the parts on Ali but there are a few options to choose from and I don't know which one to buy? There is V4, V4.1, V4.2 and a V5? I don't know if I can trust the pictures but each versions looks different, some kits have loads of parts and others don't? Any UK guy's with OLED Switch's out there able to point me in the right direction?

Freaking sick, how much i need to modify my oled for this?

WHAT MODEL AND CODE OF THE CERAMIC CAPACITOR GOES INTO THE PROCESSOR? I WENT TO INSTALL AND DAMAGED THE CAPACITORS OF THE PROCESSOR.

@_MJ07_

Жыл бұрын

0201 1uF 6.3V 20%

can I ask for a link video modchip of Sxlite attached to the oled switch, I can't see your video, I saw it before, please upload it

Which Hwfly chip would a oled switch with 14.2.1 update need?

@tvpartsworld806

Жыл бұрын

Any of them except sx core. But sx core for Switch Lite will also work.

Hello, a question is there a problem if I leave the Switch Oled with the Wifi on if I install the HWFLY or do I have to format the Switch

@tvpartsworld806

Жыл бұрын

hello. before you disassemble the console just turn the airplane mode on.

@fabricioleiva29

Жыл бұрын

@@tvpartsworld806 Thanks

@brandonphilander661

Жыл бұрын

I have a brand new Switch OLED, still in the box and never turned on. Should I setup the Switch with my account before I have the HWFLY install or can I do it without ever having turned it on?

@tvpartsworld806

Жыл бұрын

@@brandonphilander661 you should set the console up and insert the blank sd card in. It will ask you to update the console, just do it. At the end just turn the internet off.

@mimireia_

Жыл бұрын

Use incognito RMC for the emunand, so this way it's impossible for Nintendo to get your ass, and thus connecting to the internet with it. Thing is, everything that's Nintendo related won't work, it's mostly for homebrew stuff + streaming apps like KZread

Bro tienes un backup de rawnand de nintendo switch oled para reconstruir nand firmware de oled que me puedas regalar una copia para reparar mi.oled

Hi, what is the name of the liquid that is cleaned with cleaning swabs?

@tvpartsworld806

Жыл бұрын

IPA 99% Isopropyl Alcohol

@LoudDirector

Жыл бұрын

@@tvpartsworld806 thank you 👍🏼

conformal coating on the wire?

Whats the liquid called that you used at 15:16?

@same4718

Жыл бұрын

Uv solder mask

how about the thermal paste?

Hi, how do you prevent the two D and A wires from interfering with each other? Since they're touching

@tvpartsworld806

Жыл бұрын

The wires I've used in this video are covered by transparent paint so they are isolated. They look like just normal copper wires but they are not. Transparent paint protects them against shorts etc.

@Lord-kd3ee

Жыл бұрын

@@tvpartsworld806 oh so that's what you meant in that video segment, thanks!

I wish you could do this for me. I feel like i could do it after enough videos but dont have all the tools. How much for us?

How much do you charge for adding mod chip and backing up nand?

Do you do a mail in service to install chips?

@tvpartsworld806

Жыл бұрын

Please message us on Whatsapp +4407451466640

how do you flash the chip?

Hi, I hope you can make a complete tutorial on the jailbreak process right after modchip installation. Thank you.

Sir high voltage problem ? pleas help me

Hello, do you still provide a service like this? Id like my switch modded. Its OLED 14.2.1. I will provide everything you need.

@tvpartsworld806

Жыл бұрын

Please message us through whatsapp on 07451466640.

What is the cost for this service?

Enameled wire. Just a different kind of insulation.

6:56 my dat0 shows 0.475 - is that ok?

@ledezma2003

Жыл бұрын

I just modded my oled and thats what i was getting on mine too. it worked for me so i think your good.

i am surprised there are people unaware of magnet wire and how its coated with lacquer.... they hopefully are feeling pretty ignorant and useless now.

Can I send to you my switch console for me to work it?

Valaki ilyet tud Magyaroszágon??

Even after all these years, there’s no easy plug in solution but all this soldering technique involving Yikes

@feetenthusiast1015

Жыл бұрын

Sucks, pays to be an early switch owner I guess tho

Hello my friend, my device is OLED, when I enter the album in the device so that I can browse programs and download games, a message appears Error code 2144-0001 Firmware 14.1.2 Atmosheare 1.3.2

@robstreeter1634

Жыл бұрын

You fix ?

Can u hack my oled too how much