Had the same problem. Just picked up the scooter and dropped it on its tires from knee high. Fixed it for now. If it happens again, I’ll open it up and replace the connectors. Thanks again!!!

@nigmane

Жыл бұрын

still works?

@RAMZAVFX

Жыл бұрын

Worked lol.dropped it before getting on a n elevator and it quit out on me half way to class. Just dripped it on its tires from knee height and it's fine now. Smh 😂

@click_gaming4277

9 ай бұрын

Hey @rotorbob. Dude your a genius. This just fixed my sons error 14. Thanks so much. No idea how you thought of that solution. My son says your crazy 😅

Had my 1st error code 15 today 24Sept2021. ° The initial problem began when dash and scooter didn't turn on when pressing the button. ° Eventually it turned on, then shortly after beginning to ride the scooter decelerated itself a few times while I was trying to accelerate. ° Then the red 15 began flashing. ° I turned it off and on a few times, but the flashing 15 kept appearing. ° I did a reset after remembering reading about it, and it worked. I made it home and found your vid. ° Watching your video was helpful in confirming what I guessed was the cause. ° Inspecting the issue I now think that hanging any bag over the handlebars can be one cause of such a problem. As when a bag strap/handle finds its way into a small exposed piece of electrical wiring from the brake it can put just enough tension on the connection as to disturb it. Thanks, good video.

@findoutDIY

2 жыл бұрын

Thank you! Glad it helped.

@tysonsinclair5472

2 жыл бұрын

How did you get it to turn back on… mine is a stuck turned off

Thanks for the video. my scooted fell over and started giving me the error 15 message. Just used this to fix my scooter. Bought tamper T10 torx screwdriver. Opened it up and the cable was literally unplugged. Plugged it back in and right back to working.

I had ‘error 15’ showing, done what you did in the video, and it’s cleared it. Those wires was stuffed/crammed into a grey rubber cup with some right angle bends to them.So I took them out of that grey cup and tape each connector, and free those wires so the do not have such a bend on them, THANKS MATE 👍🏾🇬🇧

Dude thank you! First 22 seconds of video I fixed it. Wow

Thanks man. Just now got an error 15. Followed the video the cords were bent but could replicate the error. So i straightened them. And then put it back together. And it seems to be fixed.

Bro you are the best!! Wish I could give your video more likes. Just fixed my Segway in literally 5 minutes. Many thanks!!

@findoutDIY

Жыл бұрын

Glad it helped

Thank you for this great video. We were able to fix Error 14 👍🏻

@nidhigupta6161

2 жыл бұрын

Where I can get the tool to open the display ?

So much clearer and more specific than any other video/site I found (size of each screwdriver, noting zip tie that needs to be cut, etc.). Thank you.

Loving your old skool casio watch :)

Thank you!!! Hoping this will fix the one that was given to me!!!! 🎉😃🎉

You just saved me a throttle replacement. Many thanks for that! 👍

I wanna buy you a beer man you just solved something that's been bugging me for months.

wow man worked like a charm, you were right on the tight angles on the cables. xiaomi m365

@nidhigupta6161

2 жыл бұрын

From Where you got the tool to open the display? Please help..

This video saved me.... Thankyousoomuch Sir... Godbless you more🙏

Thank you for sharing you save my time and I fixed my segway easily 🙏🙏🙏

You just saved my life thanks man 👍🏾

This worked for me, thanks!!

Thank you so much! Best video ever!

Thanks for the video. It works. error 14 solved.

worked for me. the connection is bad right up next to the display connection - i can tell that my fix won't hold. i'm gonna have to figure out how to fix the blue brake wire right as it enter the solder connection to the board. oh joy. Still, thank you for pointing me in the right direction.

Applied the fix as you described it and it worked! Thank you sir!

Thx mate, perfect advice.

Think the person who had the scooter before me couldnt figure out the problem and replaced the handle with the wrong one, and to rid of the error codes 14 & 15 I have to find the correct replacement as I checked every video in history and tried every single trick haha

Thanks for the help!!!!

You help me a lot, thank yuu very much

it is not a phillips head for the board. It looks like a star with security . Any idea what size bit it is? Thanks

Hello,my scooter is showing the exact same symptoms,but is flashing an error 16,which I can't find a solution too, any ideas?

Thanks this helped. Nice Casio btw

Thank you bro u saved me 2 mhonts its working

Thank you man 😊

Thank you!

Hey for some reason mine wasn't that easy where else should I check?

hey i done that to mine was having same issue with mine will ride it later and see if it has fixed it but besides that thanks dude it helped

Many thanks 🐾🐾🐾

Good job

Thanks 👍🏾

What do I do if my handle bars aren’t straight too

Thanks

You should probably have cut and soldered these.. once a connection like that is bad it will never be fully ok by just bending in my experience: issue always returns at some point.

my scooter screen doesnt turn on at all ninebot max plus what could be been siting ayear trying to fix it myself

What is its not that? What would be the next step? I'm getting the 15 error but nothing I do with the wires, like you show, does anything.

@rubendecastro444

2 жыл бұрын

Did you find a solution?

i had the same problem, sometime works and some time shome error 15 and the scooter stop, i usually press the break and run again.

@spicydogsoup

Жыл бұрын

that's what I did sometime just release the throttle also work. Not sure if something is loose in there or shorting.

THANK YOU!

@findoutDIY

Жыл бұрын

You're welcome!

I have error 18, what's wrong with it?

Good video! Anybody knows how can i reset the mileage of my scooter (not selling reasons) please?

There is a decrease in the speed, the speed was 25 km before, and now the speed has become 22 km in the fast sports mode, how can I restore the speed as it was in the first 25 km

Any other options got error 14 nothing has changed

Now do a tutorial on Ninebot F40e/F40 on how to get the screen out.

I have this error after send my scooter to friend ask him repair. But I can use normal not a problem, only error 14 appear. Thanks upload the video will fix ASAP.

Hi my scooter is new then sudenly when i turn on it start beeping non stop and not showing any error codes its just freeze all can someone help me pls.

I have a new throttle but still im getting this error every day ! dont know what is wrong !

Hola. En la Pantalla abajo de Km me aparece ECO alguien sabe que sucede?

Why dose mine say Error 18

Thankfully I don’t have any problems yet

I would just solder them and you’ll be set for life !.!.

Questo G30 Max costa molto e da errori cos'ì stupidi? complimenti alla segway per le finiture al risparmio. Grazie per la soluzione.

i had a code 16 can somebody help

Mine scooter sometimes shows the same error and sometimes not . Where I can get the tool to open the display ? I also want to fix the error, I am not able to open the display without that specific tool.please help me.

@mathiasvallentin5865

Жыл бұрын

It’s called a torx screwdriver

@katarinatravel3764

Жыл бұрын

Buy torx screwdriver

My scooter charges but stop after a few minutes can this be the same problem it charges but only at 95 percent

I have error 10

Very since scooter

Mein error 10 🤷‍♂️

Just solder them.

what a horrible company, brand new scooter and Bluetooth not working !

Thank you !