NINEBOT MAX G30 SPEED UNLOCKED | 32 KPH | HACKED | SEGWAY | SPEED HACK | SPEED UNLOCK
Тәжірибелік нұсқаулар және стиль
As we all know the Ninebot MAX G30 leaves the factory with a peak power of 700W and a maximum speed of 25 Km / h. The objective of this “Best firmware for Ninebot MAX G30” package is to exceed 30 Km / h, indeed it will be possible to reach 32 Km / h at full charge, also adding torque and acceleration to the vehicle. It is therefore a question of enhancing and increasing the overall performance of Ninebot MAX G30. The Ninebot MAX G30 has a high tolerance to enhancement, American scooters turn between hilly stretches (therefore requiring more effort) without problems with 1200W.
The Firmware
The firmware that will offer you a 1050W (the original scooter delivers 700W peak). Even the ECO and NORMAL modes will be enhanced , it will also be possible to notice an increase in braking performance.
Furthermore, the starts from standstill vary , I believe that 5 km / h are really exaggerated and you often risk running into "false starts".
Obviously, as the power increases, the autonomy of the vehicle will decrease in proportion to the firmware chosen and the driving mode.
Cruise control will activate after 3 "at constant speed and no longer at 5".
Advanced Firmware Features
The firmware has some peculiarities that have already been previously applied in the Xiaomi M365 PRO firmware and that many users have appreciated. Let's go now to deepen them.
Accelerator based on Russian algorithm
The standard throttle of the Ninebot MAX G30 is a “speed based throttle”. On this accelerator each position of the lever corresponds to a certain speed, hence often a non-fluid behavior . In this firmware the " power based throttle " or " russian throttle algorithm " has been applied , a mode where each position of the lever corresponds to a total power output . The management of the accelerator therefore becomes much more similar to a thermal engine (car, motorcycle) and you can travel at excellent speeds with a little gas . To learn more about the topic click here to access the dedicated article.
Exponential curve of the accelerator
Ninebot MAX G30 is an electric scooter with a lot of torque and acceleration, especially if you install firmware that increases its power. All this leads to a certain "nervousness" of the vehicle that could disturb during low speed maneuvers. As previously stated, the objective of Monopattinoitalia.it is to improve the driving experience . Hence the choice to apply an exponential curve in the management of the accelerator.
By applying this curve, the first part of the accelerator will give moderate increases in power thus improving the manageability of the vehicle . The second part of the accelerator will instead give very marked increases in power even with small increases on the lever itself.
KERS (engine brake) deactivated
Another change in this “Best firmware for Ninebot MAX G30” package is the absence of the engine brake . Some will be skeptical but in reality it is an option already presented on many firmware for Xiaomi M365 and also very appreciated. The KERS in fact does not recover much energy in deceleration and often leads to overheating . The KERS also makes the driving experience made of acceleration and deceleration not very fluid . Its deactivation brings the scooter to free roll when the accelerator is released and therefore to travel meters after meters with almost zero consumption! A method for limiting consumption is by tapping the gas alternating with moments of free roll.
Anti-tear function
Known problem in electric scooters is a kind of vacuum when going from the deceleration phase to the acceleration phase, and this is even more noticeable when working with KERS deactivated. To remedy this annoying problem we are met by the anti-tear function , through which the motor is not "turned off" during deceleration but is left in an active standby at very low wattage "20-30 watts" so that it is ready when will want to return to the acceleration phase. Those who were already working with KERS disabled will notice the presence of the typical hiss of the G30 engine even when decelerating through these firmware.
HOW TO DOWNLOAD FILES
STEP 1. CLICK THIS LINK 👇👇👇👇
bit.ly/39UzbsO
STEP 2. CLICK THIS LINK 👇👇👇👇
drive.google.com/drive/folder...
#ninebotmaxG30 #G30maxSpeedUnlocked #SegwayG30Max
Пікірлер: 383
HOW TO DOWNLOAD FILES STEP 1. CLICK THIS LINK 👇👇👇👇 bit.ly/39UzbsO STEP 2. CLICK THIS LINK 👇👇👇👇 drive.google.com/drive/folders/1n-KvuT8vlct7tEHooWuflUfDPHlHl2a6
@eliteone4950
2 жыл бұрын
Don't have the same ble an bms numbers as you, can it still be done???
@kentjohansson1981
Жыл бұрын
Does this work when i have BMS version 1.5.8?
@dakhortv4166
Жыл бұрын
Hello, great video ! I just bought one G30 LE II (v2), i flashed it with your .zip, i can go to 40kph. Is that normal with your last update ? or i will burn my battery ?
@dannicolcea
Жыл бұрын
In google drive there is a different name for the file, it is not g30dagster, the name is moabv2_quadratic, is it the same thing?
@alqnnn7822
Жыл бұрын
@@dannicolcea its the same??
Thanks from Australia. Tried changing the region to US as shown in other videos which did nothing. Your re-flash works great. At first I thought it hadn't but scooter was at 50% charge. Charged it to 100% and took it for a spin (despite it being night and raining) and bingo...30kph on the flats and much better torque and acceleration!
@GilberthFrancisco
3 жыл бұрын
THANKS FOR THE FEEDBACK
@GreekNicko
2 жыл бұрын
bro do you have a copy of the dragster Zip ? I'm from Perth haha
Thanks mate. Scooter moves wonderful well. Respect 💪😎👊
Where did you get the zip file you extracted in the application? Is there any link where you can download it?
My controller got fried so I bought a replacement which said it was genuine (but I don't think it is) XiaoFlasher connects via Bluetooth and shows it connected, but every time I press any other button, it comes up with connection error. Pls help
Man I can’t thank you enough just done it on my max g30 2nd gen and it worked flawlessly. Took it for a quick spin and noticed straight away the throttle is a lot better. Does not take long to get up to full speed. Before it was very slow and sluggish getting up to speed this has made a massive difference. Has made my scooter feel like a totally different scooter than before. I needed a little more speed and this has made it so much more zippy. I can’t thank you enough. That little increase in speed is more than noticeable would not want it to go any quicker. Just need to see how it decreases the battery compared to before the hack and range.
@GilberthFrancisco
3 жыл бұрын
Thanks for the feedback sir.. please subscribe, im glad it worked well
@morganlimes
3 жыл бұрын
Hows it doing a month later?
@martindashov
2 жыл бұрын
How about the warranty anyone know its gone after hacking or roll back the software?
@johndosh6832
2 жыл бұрын
@@morganlimes yeah it’s working fine.
@johndosh6832
2 жыл бұрын
@global pulse yeah still working all its still good.
Is there much more of difference between just changing region to US 30 km and the dragster mode? Is there more performances in dragster mode?
So did u test the drops of speed per block of battery till 25? you've wrote that it would keep the top speed till it's allmost empty?
Give me error.. it says… to many errors and ask me to reboot and try again every time I do it.
Good day. I did everything according to the video and when I choose the zip file, I don't have the M365 tools item there. Thank you for the advice.
Thanks mate from Australia 👏🏻
In google drive there is a different name for the file, it is not g30dagster, the name is moabv2_quadratic, is it the same thing? where to download the file the dragster^? how do you get a new serial number? you can answer? thank you
Hanep ang galing Kabayan mas bumilis na si Max ko. Kahit naka Drive Mode lang me sa Gen 1 hub. Ayos na ayos. Ramdam ko ung dagdag na speed. Tama ka exponential speed increase na. Nde tulad dati logarithmic. Start s mataas tapos pababa. Thank u thank u Sir. Need ko na mag upgrade nito ng Motocross helmet!🤗🤗🤗
Battery charging indicator disappeared after this? Otherwise looks to work fine.
Hello it says to many errors and ask me to reboot when I try the flashing part
can you undo the speedhack to the factory settings also?
my G30 goes 30 - 31 km/h as it came with the original firmware. so i wonder how much this is worth doing. NOTE: i just can go 30-31 km/h on the sport setting even when the battery is almost drained it still keeps up to a solid 28-29 km/h.
@thursday5291
3 жыл бұрын
what scooter and what gen if its segway ninebot g30 e-scooter
@podgebrennan1
Жыл бұрын
I hacked my Segway es2 and it spins the front wheel on acceleration can pull me up hills it wouldn't fit before
Can this be done with iPhone? I have the new Max and it has the new motor (9) currently does 18.6 mph what will this change it to .?
It flashed easily and works great! Let's see how long the honeymoon lasts lol. (Well deserved sub)
@GilberthFrancisco
3 жыл бұрын
Thanks sir
@Bigheadedwon
2 жыл бұрын
it's been 4 months, have you had any issues come up? I'm about to order one in a few days and am looking for follow up feedback from people who've done it
@barelytrine
2 жыл бұрын
@@Bigheadedwon works great so far, way more torque uphills. Overall it just performs better.
@maksymbihunov8321
4 ай бұрын
@@barelytrine how it goes dude, is everything ok?
Hi can you please to re-upload the file again. Its look like the server deleted the file
Pls respond I did this on my gen2 and it goes max 36kmh will it go faster if I change serial number
ayown hahaha salamat dito master :D
@GilberthFrancisco
3 жыл бұрын
welcome bro
Do you know if this speed hack works on the newer g30lp ninebot scooter?
Gilberth, the link is not working, can you plase reupload file? Thanks
hi how do I restore the factory settings I turned on the brake light permanently I want to turn it off
i dont have an iphone but if i download the app on my computer from bluestacks, could that work? the bluetooth works and everything i just want to see if it would work from downloading the app from my computer and doing it on that?
Where do I dowoad the zip file I click the link and it doesn't take me anywhere
Does it work new version app aswell or i dont update my scootee. Gonna get next week
Just did this on my first gen, boosted it up to 30. Pretty neat! Eco mode puts it on 20-25, Defaultmode is same as Sportsmode, just starts slower. Hats off to you sir!
@GilberthFrancisco
3 жыл бұрын
Very nice!
@wuszu36
3 жыл бұрын
What is your weight? Cuz I'm 93kg and I can get only till 27km/h after hacking it.
@TheMonkeySage
3 жыл бұрын
@@wuszu36 I weigh 61kg, yet it also goes as fast even when I'm riding with a passenger. This puts me at 130kg in total at 29-30km/h. What version of the step are you using? Are you sure it's not the LTE version?
@wuszu36
3 жыл бұрын
@@TheMonkeySage hmm Strange. 🤔 What do u mean by step? And as well what do you mean by LTE? 😁🤔 I'm new to this movement, just got it yesterday.
@TheMonkeySage
3 жыл бұрын
@@wuszu36 By step I mean scooter, got my English all messed up 😁 When you connect your scooter to the ninebot app, what version does it say your scooter is? It should be visible under your connected devices in the app (top right). Mine says 'Ninebot KickScooter Max G30' under my scootername. If you run this app and connect for the first time, make sure not to do the firmware update! Enjoy your scooter brother!
anyone have a link to the firmware. the link to the firmware shows the account has been suspended
couple questions one does this do any additional where on the engine or battery and two to give me a rough idea of expectations what do you estimate your rider weight is
Does it also work on SEGWAY Ninebot Step G30LE??
I have a audi version from the G30 II. But i can’t do the unlock. You can help me please?
amazing simple tut ! Respect ! worked like charm
@rimpisidhu8031
2 жыл бұрын
Hi did it work for u and wut scooter do u have
@GlishaSo
2 жыл бұрын
@@rimpisidhu8031 g30 second gen
@rimpisidhu8031
2 жыл бұрын
@@GlishaSo is it still working and doesnt have any issues and did it decrease the range of it?.. ty for taking ur time to help me
@GlishaSo
2 жыл бұрын
@@rimpisidhu8031 yeah its flying its amazing how much power in it but when we speak about range im not sure i was not measuring how much i made with it i will need to do that these days probably and post on my youtube how much you can pass with this settings and with stock one. All best bro !
@rimpisidhu8031
2 жыл бұрын
@@GlishaSo tysm for helping me out. I'm gonna sub to u
Do you have to have the phone with the scooter while using it for instance I have an iPhone and do this on a mates android will the scooter alway do that speed
Ciao ho aggiorniamo il firmware poi ho fatto l’aggiornamento della nazione mettendo gli usa ma senza carico mi segna 29 km come mai
i have hack ninebot max g30 LE model unlocked with xiomi... app, how can i bring all the original factory settings back ?
Hello, Can you Send me The file g30dragster? I can’t download it. It’s Not in the link. Getting error’s with the current zip file in the link
works great. thanks!
Is this "de20kmh" locked firmaware? I put it for free and cannot change back to examble "usa". I reboot my scoot and still same.. thx for your time.
32km - speed demon!
does it work on Ninebot KickScooter MAX G30E II ? cuz i flashed it and front light time to time when i break and stop goes off after a beep
@tomvancraen8853
2 жыл бұрын
Do you know if it works or not, i wanna buy one too but i would like you hack it and make it go faster
Wow..wow..🤭♥️♥️
Is there an iPhone equivalent for the App that needs to be downloaded?
Hi can you help me to browse the thing in the zip file because I can’t find it
Can this work with the battery mods available online?
does this work with the G30 D II to? :D regards johnny
how do i get back to the original serial because i can't??????????
how to rollback to stock firmware?.
I lately haven't been able to get 30 kmh not even 29kmh and this method isn't working for me sadly.
How it improves the top speed of my g30 max
I cant make 30km/h just 28 o dont know wy? Mist i change the id number?
Hey there, I have a problem, my ES2 will not charge anymore through the external battery. The external battery has the 3.0.3 version.
Will the increased Speed also improve the ability of the scooter to climb slopes in an acceptable speed?
@GilberthFrancisco
3 жыл бұрын
Yes because the torque will increase
Would this work on the Segway Max g30 LP?
@lana7730
3 жыл бұрын
I did it on mine and it did extend the range from 25mi to 35 mi range. No speed difference though.
Hi. Thank you very much for instruction. But where can i take a new Serial Number?
first link just takes me to your KZread page. is it supposed to be something else?
Regen brakes are set to low after this custom firmware upgrade, is there a way to hack speed and have High regen brakes?
@DL101ca
Жыл бұрын
Simply change region to US, after VIN change. Top speed unlocked.
will it now take updates from the app of ninebot ?
Hi great video! Is it possible to unlock the European version of the Segway P100s?
hi guys, sorry i want to ask, how can i rebot my g30 after i flashed it? thank yall
So for first gen motor constant speed after battery go down under 80%??
@GilberthFrancisco
3 жыл бұрын
usually yes
How do you disable kick to start?
I’ve bought Ninebot Kickscooter Max g30p and it was US region out of box (30 kph). So i am 115 kg dressed and it drives me 31 easily. What is the point of dragster firmware? Will it help to break 31 kph limit?
@mysteryakatsuki
3 жыл бұрын
I got to 23 mph max , so yes
@mysteryakatsuki
2 жыл бұрын
@@SplashTropic I pretty much added 55 psi for both my tires. Also perhaps I got the second version of the Segway Ninebot Max.
Does this work when i have BMS version 1.5.8?
Where can I download the G30 Dragster zip?
what phone holder did you use for the scooter?
I heard people say if you change it to 31km it overheats your battery
Hey why dose the serial number need to be changed ? Can I do everything but change the serial .
@GilberthFrancisco
3 жыл бұрын
you cant get the full potential but you can try
Does it work on the ninebot max G30e ii 2gen?
Hey , do you have another link? Old link has an error
hey bro link doesn’t work can you send us a new one?
It never changes the region. I tried several times. The region always stays in DE (20km/h)
@krisztiankatona5867
Жыл бұрын
Me too . I cant change to US
@vafittanvilldu
Жыл бұрын
Me too!!
@DL101ca
Жыл бұрын
If you have the latest Segway program update, it won't allow you to flash it.
This this channel to give high information ❤❤
Boss magandang araw po!gagayahin din din po ba ang serial number na nilagay nyo sa video..salamat po sana masagot..ninebot g30 max gen 2 users po.
Hola , es lo mismo ponerlo en la región us o serial ? .que diferencia hay .perdona no hablo inglés ..gracias
I’m on the 2nd gen motor top speed i get out if of it is 19mph if I do this how much more speed will I get?
@elcappio8449
3 жыл бұрын
With 48v battery
@mysteryakatsuki
3 жыл бұрын
I did it on my 2nd gen and got 21 -22 mph. It's definitely worth it. And I still got like 30 miles without braking a lot.
@catgirlow
3 жыл бұрын
@@mysteryakatsuki 21-22 mph entire time or?
Merci beaucoup ! Sabel From Marseille ( France)
Can i go 30km/h even if the battery is running low. I’ll use US settings now.. there are no problem keeping 30km/h when the battery is fully charged, but the speed drops when the battery is reducing.. hope you understand what I mean!
@HenryStormStrike
Жыл бұрын
Did you find answer?
Just tried this on my 2nd gen and it actually works! Thank you so much! Keep up the good work. I highly recommend
@GilberthFrancisco
3 жыл бұрын
Welcome sir please subscribe
@johndosh6832
3 жыл бұрын
I have a 2nd gen what’s top speed you get out of it now with the hack in mph thinking of doing it to my scooter
@bob6978
3 жыл бұрын
@@johndosh6832 mine is 2nd gen also. Mine used to go 19mph and now it does 23mph (I am light) it's not a huge speed increase but it's definitely noticeable and tbh I wouldn't really want to go any faster 🤣 i also noticed the throttle response is way better
@johndosh6832
3 жыл бұрын
@@bob6978 thanks for getting back to me yeah I don’t want an excessive amount more of speed just felt like it needs a touch more speed. Good to hear it works I am definitely going to try it out.
@johndosh6832
3 жыл бұрын
Also how long does it hold the speed for? When the battery is going down.
Hello bro, can this also work on G30LE?
For Segway ninebot mini pro ?
Why are you reflashing the rom? Putting settings at US region already puts the device on 30km/h. Now you changed your serial number and put different firmware (lost your warranty) and your speed is still 30km/h
@ohsht2300
3 жыл бұрын
I was thinking the same
@flyz5828
3 жыл бұрын
You can factory reset it so u still have your warranty
@petewebb5149
3 жыл бұрын
If you are in Australia changing the setting to US does nothing. The re-flash works however...30kph not just 25kph and better torque/acceleration.
@regsmith283
2 ай бұрын
@@petewebb5149 Where do you get the new serial number from, i'm in Brisbane
Hi, what ampere value is selected in settings? If the selected value is higher than 35 amps(Nominal 462W | Peak 924W) it may damage the device.
@elcappio8449
3 жыл бұрын
You can set 500w nominal and no damage me after 500w set I make 130km and nothing damage
@AlgeriaYounes
3 жыл бұрын
I wonder the same thing. What ampere is selected in the crw?
@rimpisidhu8031
2 жыл бұрын
wait wut I dont understand I don't wanna fck my scooter i just got it could u explain and time stamp it
Is there anyone who uses this firmware more then half a year? Plz give a feedback - is everything ok with the scooter?
@morganlimes
2 жыл бұрын
YO I have been using a custom firmware for 6 months now with no problems! but I use just 25A instead of the 37A here because I felt that it was too much. The defaults 25 so I just left it at that and it's fine and I get top speed of 23 or 24 mph but I am light depends on your weight. It's safe so feel free to use
Wow this worked nice man! I'm subbed
@GilberthFrancisco
3 жыл бұрын
Thanks for the sub! Glad it worked
Doesn’t work on g30 max 3 generation
I have done it and it worked thanks alot, but I should of asked this question before I done it. Can I take it off if I choose too?
@peterp5217
3 жыл бұрын
To it's original settings?
@GilberthFrancisco
3 жыл бұрын
Yes you can! just update in segway app
Anyone tried with max g30 gen1 motor? What was your top speed?
@darrelbajaro5296
3 жыл бұрын
Mine is Gen1. 30kph on S mode. Accelerates more.
when i click on slect zipline the max g30 is not listed
@adixson5639
3 жыл бұрын
same
@davidnieuwland
3 жыл бұрын
You need to install winzip for Android.
Can you guys please help me on this, every time I try to flash my scooter, it keeps failing for some reason. Please respond immediately or as soon as you can.
@badlands5527
Жыл бұрын
Same thing happened to me pretty much ruined the scooter no way to flash it back I had to buy a whole new one scooter
@gabriellawrence8824
Жыл бұрын
@@badlands5527 same here, it was horrible. Thanks that you let me know, that someone scooter had this. It wasn't just me lol. I'm just waiting for the new one to come out, the new software. But it's been a very long time.
Will this work for 48v?
Does this work for ninebot max g30lp?
А он всегда будет ехать 30км или снижать до 25км ????
@maksymbihunov8321
4 ай бұрын
у тебя получилось?
Wait my scooter goes up to 30-31 mph. Would I be Able to go faster?
@GilberthFrancisco
3 жыл бұрын
Yes
@borky1987
2 жыл бұрын
31 mph??
Mine doesn’t change country I tried everything.
Worked for me. I live in Texas so my max was already in the US region and already went 32 without the cfw. The cfw improved the top speed from 32 to 36kph. It was a minor improvement but I can feel and see the difference. I hope I can still go at least 20 miles in sports mode now.
@richboiikosmic2177
3 жыл бұрын
How many miles can you go in sports mode
@qwertyisquirky7073
Жыл бұрын
How many miles did you go
I couldn't find the zip-file...so no reboot yet. =(
Saludos amigo tengo una ninebot g30lp todos los pasos me salen bien lo unico que no puedo aser es seleccionar el archivo win.zip no lo encuentro te preguntó hay que descargarlo primero
why the file has a different name moabv?