Perfect when we use a grip !

LOL .. i just let it spring out 🙂 not a bad idea for the microsd card though..

@alainmonnens

Ай бұрын

Always afraid the SD card will end up on the floor.

@hennerbegger

Ай бұрын

Me too :-)) That hack is not necessary and has never been a problem for me. Push the card into the slot and then let it snap back, it comes out a little further than if you do it like in the video and you can easily grab it. And it doesn't fly out. So 90% of all so-called hacks are completely unnecessary.

i can cut my finger nail now... finally!

@alainmonnens

Ай бұрын

Glad I could help 😉

I have been doing this on my Olympus e300 because the release mechanism was brocken! Simple fast and easy👍

Great idea I'm going to do that to my Z 30

Awesome! Thanks

@alainmonnens

Ай бұрын

Glad it's useful to you too.

I use mini rubberized tongs, used for cooking….They work amazing….like silicon toaster tongs ( which also work) but smaller.

The card in my Zf just pops out when needed, am I doing something wrong?

Needless hack.

Gr8😂

Its really not difficult to remove it as it is.

@alainmonnens

Ай бұрын

Do you use the Zf with a grip?

@MrPetebuster1

Ай бұрын

Yes and have no issue,with or without it

doesnt the Zf have a high speed usb c port? Why even remove the card. Just plug the camera straight into your PC. But also Bad design by nikon.

@alainmonnens

Ай бұрын

Yes you can download the picture from the Zf via USB-C. With the grip, it is difficult for my fingers to get the SD card out. Nikon obviously doesn't know the size of my fingers 😉

@stavros.fourfourianakis

Ай бұрын

There are some reasons to remove the SD cards instead of using a cable: 1st: Card reader is more fast 2nd: I have a bad experience with Nikon flaps - so I protect them - I do not know if they need to remove the skin of the camera if they change flaps - and I have a colored one - a grey ZF (and is not sure that you will get back a colored one if you send the camera in Service) 3rd: I am using different cards with different saved settings (different settings for MF lenses eg on that case the back button is 100% zoom, while on the other card I have settings for AF lenses eg the back button is 3D tracking), so it is important for me to be able to change cards.

If you do not have the capability to remove an sd card from a camera, then you should not own a camera.

@alainmonnens

Ай бұрын

Do you have a Nikon Zf?

@fotografalexandernikolis

Ай бұрын

This has to be the most garbage elitist gatekeeping I've ever read.

That's not necessary and has never been a problem for me. Push the card into the slot and then let it snap back, it comes out a little further than if you do it like in the video and you can easily grab it. And it doesn't fly out. So 90% of all so-called hacks are completely unnecessary.

@MarsViolet

26 күн бұрын

I find it helps a lot with the grip attached. Don't need it at all without the grip.

@drazenzuvela1647

7 күн бұрын

Camera with mounted L-bracket or grip need this. In my case snap-out method results flying card around. You may loose it. But also may ruin your lock mechanism what happened to me. So this is great at Sony A6xxx when bracket mounted. But you are free to choose this or "cursing hand-book".😄