Love the channel, man. keep em coming

@SpeedCultureStudios

2 жыл бұрын

Really appreciate it!

Bout to cop these, my spc’s are toast and SPL is just tooooo baller at this time

tried installing these camber and toe arms on my q50 but it didn’t pull much camber how do i adjust it to get the wheel tucked under the wheel well back wheel rubs on fender

Hey speed cutler, I just installed rsr super downs have had them on for about 3 weeks and I have a shake on my front right tire on regular accel. Do you think just an alignment would take this issue away? If not Would you recommend adjustable caber arms just for the front with an alignment? Not sure what to do, Please help. Thanks in advance🙏🏼

@MrJoeyzanger

2 жыл бұрын

I have a 2017 q50s btw.

@SpeedCultureStudios

2 жыл бұрын

Check lug nuts first.

@MrJoeyzanger

2 жыл бұрын

@@SpeedCultureStudios they are ok got the wheels balanced as well.

@SpeedCultureStudios

2 жыл бұрын

@@MrJoeyzanger Then I would say an alignment is the smart move. 3 weeks should be enough time to settle, so it makes sense to get an aligment anyway.

Hey J, I am unable to see a video pretaining to the front or upper control arms..... mainly talking about the front toe arm. Do you have such a video?

@SpeedCultureStudios

Жыл бұрын

I didn’t install upper control arms in the Q so I don’t have a video on that, sorry.

With just the adjustable camber arms, will I be able to adjust it to sit more negative camber? Or is it only to reduce camber?

@SpeedCultureStudios

2 жыл бұрын

You can adjust in either direction.

best front upper control arms ? i tried voodoo and they are very loud and had them looked at few times already. been told to just get spl

@SpeedCultureStudios

2 жыл бұрын

SPL is good yes. I’ve never used them but always hear good things

I think for 188 for Z1 CA. I'd rather go an extra and get spl ones for 315

What’s your opinion on isr single exit on q50 3.7 I’m planing on getting that

@SpeedCultureStudios

2 жыл бұрын

We don’t have a ton of single exit options. ISR has decent stuff. Did you see my single exit video?

Would you recommend z1 end links? I’m looking to invest in the sway bars and was wondering if you have any experience with them.?

@SpeedCultureStudios

9 ай бұрын

They are a good upgrade, especially if you plan on pushing the car in corners. The beefier sway bars put a lot of pressure on the end links so the factory ones have been known to break

@SpeedCultureStudios

9 ай бұрын

@@wrkls_ SPL is good as well. You’ll be satisfied either way

My tires are wearing out bad from the inside made me had to change one already so ima need to camber my tires.. do I need the control arms and the toe arms ? Or will the control arms suffice so that I won’t wear out my tires anymore

@SpeedCultureStudios

2 жыл бұрын

Toe kills tires so if you’re chewing rear tires fast look into both camber and toe arms

@Allcity323

2 жыл бұрын

@@SpeedCultureStudios yea it’s my rear tires I haven’t checked the inside of my front yet but the rear was already down to the wire but I wasnt aware because from the side it looked good then when I removed tire I could see the wire

I have those Z1 rear camber arms & UCAs on my 07 G35x and for daily usage + occasional spirited driving....it did the job 9/10

@SpeedCultureStudios

2 жыл бұрын

Excellent!

How much negative camber can you run with these ?

@SpeedCultureStudios

16 күн бұрын

I’m not sure what they max out at but I would imagine they’d have it listed on the website.

Hey bro do you recommend theses over the spc ones?

@SpeedCultureStudios

2 жыл бұрын

SPC is great. The Z1 arms are good quality at a little better price, I would generally lean toward the Z1, but not necessarily because they are “better.”

@kingjoe6004

2 жыл бұрын

@@SpeedCultureStudios aha I was about to shoot you a dm on insta. Thanks man. I think I’ll get the z1 arms.

My 370z for the past ten years ( I bought it new) - has had strange tire wear on the passenger side front - the most recent alignment shop told me the upper control arm is bad - they seem to think going with adjustable is the only way to fix... My car is not even lowered either!! I may spring the $500 for the z1 FUCA's and see if that helps - with tire costs ever increasing, I'm just going for highway miles/longevity > cornering... it'll never be a track car so who cares!

Is it true that q50 comes with rear camber kit?

@SpeedCultureStudios

10 ай бұрын

No-not that I am aware of

@huhSHUA

10 ай бұрын

@@SpeedCultureStudios or maybe a control arm?

@gtb.2kold807

7 ай бұрын

@@huhSHUAHonsetly I lowered my redsport on BC coilovers and the front has more adjustability then the rear as far as camber goes so if you went with a wider wheel setup these are a must. hope this helps !