Those tires look great!

Yep, gonna buy my first Arrma

cant wait to see a proper bash with this thing

Those headlights are beautiful

Lost a arrma kraton 4s in the mail but I found out I could get a kraton 6s this weekend so I am super excited love your channel

Thanks for the video, this is exactly what i needed to know! i'm definetly going for a V4 now although i really like the green one.

Enjoyed the review. awesome RC...

nice review brother!

Right on rich, I've been away for awhile, but spring is here in Canada , that's awesome to see them send you a ride to test, we all know by now if there's honest and accurate info. About our arrma's you will let us know!

Getting it! Jelly!

Awesome brother, good info

Sweet, lots of innovation

Nice,great vid💪👍

Thanks for showing how the new rear upper brace block works. That does look like an excellent design.

@richduperbash2966

5 жыл бұрын

You bet Brother 👊!!!! I'm impressed no doubt. 🍻😎💪👊👊

OMG buying one right now damnnnnnnn

VERY NICE REVIEW. THANKS BROTHER..

@richduperbash2966

5 жыл бұрын

Thanks Philip 😊. You bet Brother. 🤘🤘😎💪👊👊

Can’t wait for the aftermarket Center brace front and rear plastic parts on the bulkheads look like they are a direct fit. Thanks for showing us the insides of the v4 first man to do so. Everyone else is just doing same old garbage unboxing. Ur the best , get sent a 1000$ and you don’t even break it in before putting the 16 t pinion and lettin her rip. Can’t miss a vid. 🤟💪😎

Looks good.

Nice review bro! I just picked one up yesterday. Haven't ran it yet. I was so excited that I forgot to get the plug adapter to charge my 5k mah 100C battery lol! Just got that today and a motor fan. 👍

Right on RICH!👍👍👍

As always. Rich. Your the guy that will be the test for all of us ! Your opinion means everything ! So bash on brotha. Bashhhh on! Can’t wait to see that thing in RD action mode

nice ! good job at pointing technical details !

@sylvainverhaeghe2741

5 жыл бұрын

Salut Stephane que pense tu de ce v4?a première vue ça fait envie 😊

@stephanez8036

5 жыл бұрын

@@sylvainverhaeghe2741 c'est bien ils ont amélioré quelques points critiques. la plupart des bashers seront contents !

@sylvainverhaeghe2741

5 жыл бұрын

stephane Z c est clair en plus il a de la gueule comparé à l ancien là c est tous bon j achète 😂

Dang it Rich! Now I'm gonna have to buy one! Nice video buddy! ;-)

@richduperbash2966

5 жыл бұрын

Thanks so much Kevin 😜!!!! They did a great job with these updates Brother. 🍻🤘🤘😎💪👊👊

Very Nice! 👍👍👍👍👍👍

This is Epic !

Awesome beast🤪 and usual great comment. 👌👍What i really like is the option to limit the throttle so the kids also can have ride this monster. Might be my next car......after christmas is before christmas 😂😂😂🎁

Yup that just happened!!!⚡️⚡️⚡️⚡️

Nice unboxing wow punch 9 maxed out!! Good way to break in a new RC!! Cant go more than a punch 1 on my Talion 😂👍✌️🔥

@richduperbash2966

5 жыл бұрын

Thanks brother 👊!!! Loving these latest versions 😍🤘🤘😎💪👊👊

Arrma did a great job with the style of the body and how it handles on the street and great video Richduper bash llove all your videos

@richduperbash2966

5 жыл бұрын

Thanks so much Roy👊!!!! Bash on Brother. 🍻🤘🤘😎💪👊👊

@RapidRC731

5 жыл бұрын

Back on you Richduper Bash you are the king of rc bashing 👍🏻👍🏻💪🏼💪🏼💪🏼

Very nice unboxing and run through Rich!👊I'm super stoked about all the changes and upgrades they put into these V4 rigs! The body just looks sexy! The Typhon had some sweet changes too. No room for the tower to tower but she still took a major beat down no problem! I LOVE the quick access to the motor and center diff. best thing ever😜 I swapped in the high speed pinion in like 3 mins! Great run down and street run bro!😎👍💪💪✌✌🍻😜

Great video! Man I just bought a Arrma kraton v3 lol I could have waited a day for a V4..... 😢

The body changes and bends should help durability

I got too excited when i saw this video. You're the man for a v4 to run through its paces. Once everythings fully out it appears you can upgrade your previous generations to accept that tower to tower brace!! If so mad props to arrma and horizon 👍👍 Waiting for a v4 senton to pop up now, i wants ....👀 Thankyou for the video!!

@richduperbash2966

5 жыл бұрын

Thanks so much brother 😊. It certainly looks like the parts are all interchangeable with previous models 👍. Not sure on a V4 Senton. It occurred to me that it's not grouped in the manual with the other 6s rigs🤔. Maybe it's a separate later release. 👀🤘🤘😎💪👊👊

@koolaidwaterfountainsforth4236

5 жыл бұрын

@@richduperbash2966 i was hopeful it was in your new manual.. definitely no trace of it on horizons site. Dunno if im patient enough to wait. Theres a v3 senton on display at my local hobby shop and everytime i go in there i end up poking at it haha. 😂😂 im not going to last at this rate 🤪🤪 arrmas rigs are definitely badass no doubt my friend. Bash on dude! Love your stuff 👍👍

@richduperbash2966

5 жыл бұрын

@@koolaidwaterfountainsforth4236 thanks brother 👊. The Senton 3s hauls balls👀. I love mine 😍. Especially running the Granite wheels on her. Just ridiculous FUN😜🤘🤘

Oh yeahhhh!!!!!! Rich!!

YES. Looks amazing Rich, I was waiting for a v4 video from you. Nice breakdown! 🎉👍

@richduperbash2966

5 жыл бұрын

Thanks so much Garrett 😊!!! I really wanted to take a closer look at this new design 👀. So far I'm super impressed with it. 👍👍😎💪👊👊

Super sweet deal. Good for you. You always make me want to step up my game.

Arrma did nice job👍👍

Best video explanation and showing of the upgrades so far👍It's great to see how Arrma follow their users/customers and improve their cars in the good way.

This thing isn’t going to remain this shiny, I would hazard a guess. Have fun with it mate, we all wanna know how it goes👍

Arrma did a good job with these V4 upgrades. Can’t wait to see an actual bash test. 👍👍

Getting mine Tuesday bro can't wait I ordered blue , the v2 I had I always had problem the shocks were crap lol

@richduperbash2966

5 жыл бұрын

Holy Crap 😜!!!! Long time no talk Brother 👊. Congrats on the new Beast 👌. The 4mm shocks were the single biggest upgrade in my mind. The pistons, piston washers, and shock supports are mint. Only weakspot was the rod ends. Looks like they may be the same still🤔. Been running Tekno MT410 ones with the V2 Arrma steel pivot balls with great success overall. The V2 shocks drove me insane too🤣🤣🤘🤘😎💪👊👊

@zeusm8498

5 жыл бұрын

@@richduperbash2966 sweet bro I saw you mentioned those but to be honest I was off lost in my thoughts, but I'm still watching bro. Im still a fan of your videos good talking to you everyone I know watches you now I knew you would grow alot not many people on KZread have your skills and advise keep doing what you do brotha .

@richduperbash2966

5 жыл бұрын

@@zeusm8498 thanks so much Brother 👊. Super cool of you to say that 👍. I still remember you hooking me up with the Nero motor deal and other helpful tips👌. It's too bad Amazon seems to have gotten pricier with stuff since then. Glad you're still watching and getting your bash on 😜. I always appreciate your comments and support Bro🍻

just need a xmaxx competitor from arrma now

Nice.... I'll be gifting myself one of this Arrma Kraton 6s for my bday this March.

@ejb2184

4 жыл бұрын

I be doing the same lol end of January

Very impressive how much Arrma addresses concerns from their loyalists. I couldn't be more pumped up about the hobby and Arrma has driven me to it. I went ahead and ordered up a Kraton V4 that'll be here Wednesday. Looking forward to what you do with yours and I'm on-board to follow along with parts upgrades and changes you see fit. I aim to send em all. Home you'll keep ArrmaForum in the loop, my brother. Exciting times for our hobby and for Arrma Rc right now. Thanks, RD! Keep killin it!

@richduperbash2966

5 жыл бұрын

Thanks so much Brother 👊!!!! Trying to post up a running vid. Arrma has been ultra responsive acting on our feedback😍. First bash went well, but still recommend the basic aftermarket upgrades. Voltage Hobbies chassis braces...etc. Center brace did great 💪 as did the new motor mount, wheels, and other new upgrades. 🍻😎💪👊👊

Excellent review of the new version. Enjoyed it, glad you tore it apart a bit instead of just showing it as is. Now of course it’s time to send it! Looking forward to that just as much! Thanks Rich, you’re the man.

ARRMA is insane love your vids rich keep it up

Thanks so much for this video, always a pleasure! Much respect to Arrma for what they bring to the table, I’m very impressed with all the new rigs, can’t wait to see you out bashing with this new beast!💯👍🏼🏆🏆🏆

@richduperbash2966

5 жыл бұрын

Thanks so much Brother 👊!!!! I really enjoyed taking a closer look at this Beast 👀. Arrma did a wonderful job with it👌. Definitely hitting the dirt very soon 😍. Curious to see how these tires hook up 🤔. Pretty sure they could become new favorites. 👍👍😎💪👊👊

Am Loving the V4 so happy that I waited, I new that they would do well with this bad boy, think they have been listening to you Rich 😊great running test, great unboxing mate and video 👍😊👍

@richduperbash2966

5 жыл бұрын

Thanks so much Tony 😊. You did good by waiting 👊. These are significant upgrades no doubt. Really appreciate your kind words Brother 😍🤘🤘😎💪👊👊

@TonysRcTechboom

5 жыл бұрын

Saving up now bro 👍😁👍

Hells yes! Cant wait to see the rest of the line up

Awesome changes! That looks awesome Rich, thanks for breaking it down for us. Love that they are supporting you back for all the support you have given them over the last few years! Great stuff! 👊👊🤙🤙👍👍👍👍

nice review dude, hopefully this will solve the chassis bending issues

@richduperbash2966

5 жыл бұрын

Thanks Kevin 👊!!! It should definitely be a huge help for durability. I'm super impressed with the improvements and new design👀. Props to ARRMA for striving to improve our bashing pleasure 😍🤘🤘😎💪👊👊

@reubydo

5 жыл бұрын

@@richduperbash2966 to right Rich. How did you find the new controller BTW?

@richduperbash2966

5 жыл бұрын

@@reubydo not so thrilled about it to be honest 🤣. Really like the control adjustment's being easy to reach and see clearly. Also really like the Throttle Limit feature for handing over the remote to less experienced....etc. The handle portion is a bit thin for me personally and the wheel seems bigger than necessary. Doesn't feel as crisp as the Tactic either. Too early to say whether this will be an issue bashing. Sounds like they should've chosen a different receiver too🤯😎💪👊👊

@BillKisel

5 жыл бұрын

From the jumping I've seen in your videos Armma would have had to make this version with a 1/4" steel chassis and "I" beam brace to solve your bending issue! ;>)

@richduperbash2966

5 жыл бұрын

@@BillKisel LMAO 😅!!!! We'll see how this setup holds up🤔👍👍😎💪👊👊

Best look at the rig so far and Rich!!! Thanks for the close up detailed review

@richduperbash2966

5 жыл бұрын

Thanks so much Ed😊. I really had to take a closer look myself to fully appreciate the improvements. Make no mistake, they do some serious engineering down to the finer details. I didn't mention or point it out but they went to 2.5mm cap head screws where they used to use 2mm button heads to lock the towers on...etc👌. Arrma is genuinely building a better truck each model. 🍻🤘🤘😎💪👊👊

Bad ass Rich, congrats on the new rig and as always thanks for sharing!!!! Your neighbor didn’t realize he was among Arrma royalty?!?! 😎👍🏾

@richduperbash2966

5 жыл бұрын

Thanks brother 👊!!!! I'm super impressed with this new Kraton 😍. Yeah that was cool of that dude to say that 👍. Just glad I had the GoPro on. I'm sure him and I will meet at the track or our LHS🍻🤘🤘😎💪👊👊

@briansteeg2911

5 жыл бұрын

Rich Duperbash cheers to that bro! I gotta come out and watch you guys do your thing some time! I hit one of your spots a couple weeks ago and man, air control is a lot harder than it looks hahaha. You make it look easy!

That looks impressive cant wait for the bash

You’re the man, Rich. Thanks for all you do.

@richduperbash2966

5 жыл бұрын

Thanks brother 😊!!!! 😎💪👊👊

Sooo love the fact that arrma is listening. Keep up the good work Rich!

Great stuff Rich. They really listened to you guys. Hats off to you and arrma brother

Yes finally new tires!!!! Gonna pick one up! Thanks Rich!

Great job rich as usual the new design looks incredible mine is on the way in blue

Arrma knows the right bashers to Send It! Enjoy and keep those videos coming!

That's awesome brother. Super stoked for you man.. I'm excited about the sliding motor mount and easy access center diff. The T2T brace is a welcome treat but M2C Goliath took of that chassis flex issues. I'm diggin the body paint job and tires!! I just love how Arrma listen to it's customer feedbacks and deliver. Awesome first Street run bro. Congrats once again.

@richduperbash2966

5 жыл бұрын

Thanks so much Chris 👊!!!! These new changes look fairly brilliant 👀 . The mount and center bracing look extremely well designed 💪. The M2C 7075 chassis is still the ultimate upgrade, but the center bracing should definitely make a huge difference as an RTR 🤔. Huge props to ARRMA for listening to feedback and delivering once again 😜👍👍😎💪👊👊

Best overview I've seen so far, nobody else mentioned the wheels!

Wonderful! Rich, please get the point across to arrma that they should have sealed waterproof bearings . It doesn’t make sense to have waterproof electronics and non sealed non waterproof bearings. Such a big cheap upgrade I would think they would of done this already!

Great review Rich, enjoy!

It’s because of you I’ll be buying this soon. Great review thank you.

@richduperbash2966

5 жыл бұрын

Thanks Jake 😊. Much appreciated my friend. 🍻😎💪👊👊

Nice

@richduperbash2966

5 жыл бұрын

Thanks Brother 😊🍻😎💪👊👊

Ha I thought I was the only one to pull a rtr a part before using it

just started following ... i wish i had a truck like this so nice ...great videos and bash sessions im very impressed

That bad boy looks sick bud can’t wait for it to be released I’m getting it for sure 💪👊💪👊

Impressive to say the least. Nice video breaking it all down.

This is the truck that made me sell my xmaxx. I just didnt drive it anymore. Gotta get the Outcast too

Like the improvements Arrma 👍.

Super sweet rig. Arrma just keeps on bring'n it. Can’t wait til you get that out to the BMX track. I’m sure it will be quite impressive. Thanks for always bringing us informative and exciting videos Rich. Always a pleasure watching and learning from you. 10 x 👍

Rich have you heard when the upgraded parts will be available?

That’s awesome man. Great pickup brother. Looks good buddy👍👍

Congrats Rich! Your the perfect guy to test this Rig. Great unboxing and good job with the explanations regarding the newly upgrades, keep up the great work brother! 👊👊✌😎🔥💪

@richduperbash2966

5 жыл бұрын

Thanks so much Tom😜!!!! I'm so stoked to see these improvements from ARRMA 👊. The design changes look brilliant in person 👀. Looking forward to testing her out in the dirt soon 😍🤘🤘😎💪💪💪👊👊

thanks for the review!! now i know what im saving money for :)

This arrma company is changing the rc industry. They really get what the consumers want.

Legendary ! So glad you got this.... Great rundown 👍🏻

@richduperbash2966

5 жыл бұрын

Thanks so much Paul 😊!!! Really appreciate it Brother. 🍻🤘🤘😎💪👊👊

Can't wait to see the brace mounts in aluminum

Thanks for the breakdown video. Awesome job I was super curious how it all fit together. I agree what did you think of the radio seems like others were critical of it. Can’t wait to see you air it out.😎

@richduperbash2966

5 жыл бұрын

Thanks so much my friend 👊!!!! The radio is nothing to brag about. I like the easy access adjustments, but it feels sorta cheap in the hand. The wheel isn't as crisp as the Tactic and feels oversized 👀🤘🤘😎💪👊👊

BASH IT!!

@richduperbash2966

5 жыл бұрын

Just did today 😜!!!! Went all stock against my better judgement. Rear plastic chassis support snapped at some point and the chassis got a bit bendy👀🤣🤣. I straightened it out on the curb and threw on a Voltage 💪 rear brace. Rest of truck did stellar 👌. Top brace held like a champ, same with new motor mount. Video by tomorrow at the latest. 😎💪👊👊

Sweet 👍🏁🏁👻👻😎, so happy to see this and see Arrma keeping up the great work. Thanks for video. Not sure I will use the radio. But love everything else.

Looks great! Can't wait to see you bash this beast!👍

this is the only review that I want to see!

Glad you got one man arrma bashing king can’t wait to see your bash videos brother

Great Bench vid Rich !! I’m loving the look of the easy access slide motor mount 😁🤙

@richduperbash2966

5 жыл бұрын

Thanks so much Cam😜!!!! This model is proof positive that ARRMA listens closely to our forum comments and feedback. 🍻🤘🤘😎💪💪💪👊👊

@72nivo

5 жыл бұрын

Rich Duperbash 👍🏼🤙🏼☝🏼

Great vid Rich! Can't wait to get one of the new V4 rigs in my fleet. I'm thinking Talion or Typhon. Will definitely be grabbing some of the new parts for my Kraton and Outcast.

❤️👊😎 Ohhh it's so nice the version 4 just came out 🤤🤤🤤just in time for me to buy notorious and I love how the controllers have throttle limits. Ohhhhh nice. 👊😎 Thanks for the look bro.

Thanks for sharing, Rich. I do like the blue better though lol

cant wait to see you put it through the boot camp

and im still bashing my v2 kraton. damn things a beast..well at least now i wont have to fab a tower to tower brace if i get a new kraton. i made mine out of square tubing.

@richduperbash2966

5 жыл бұрын

No doubt Brother 👊!!!! My V2 Kraton went through hell 👀. I probably bashed it harder than any rig I've owned. I had upgraded to V3 shocks among a multitude of upgrades of course 💪. This V4 has had a serious facelift and reconstructive surgery 😍. Props to ARRMA for listening to the bashing community and stepping up big-time. 🍻👍👍😎💪👊👊

Arrma/Horizon doing the right thing and sending these out to the 'Drivers' rather than the big numbers.... awesome breakdown Rich. Looking forward to seeing this out on the jumps from both you and Vas. Now...do I order one, or weight for a V4 Senton? 🤔👍

Arrma is pulling ahead imho in the RC industry. These trucks are incredible. Your vids and some others really show off the capabilities of these beast Arrma are putting out year after year. Arrma RC's are the best in rc bash imo. Great vid! 👍

Awesome Review.. might have to add some parts to my V3... Looks like wing assembly is part of the new brace so maybe those 2 and the turnbuckles. Red is ALWAYS the way to go!!! Chassis is the same right? Mitch asked me but I have not received them yet.

@richduperbash2966

5 жыл бұрын

Thanks so much Karl👊!!!! Yes indeed, same chassis's for all the previous models I'm 99.9% certain. Part #s haven't changed. I messaged Mitch already 🤘🤘. Still no denying 7075 4mm 😍. These new versions are great, but still need some proper customizing and upgrade love 😅👍👍😎💪👊👊

looks promising! gotta get the kraton v4 soon ;)

Great video my brother 👍 they sure did listen looks like they beefed up the factors we complained about lol nice shake down and thoughts bro 😎 can't wait to see it rip 👊

I wish I had money to buy the new version. But my v3 is still pretty good

@richduperbash2966

5 жыл бұрын

The V3 version is great 😍. The V4 updates are fantastic, but that doesn't take from last year's model one bit 💪. My upgraded V3 is a complete tank😜. I will say the new motor mount and cross brace are very nice options though. 🍻😎💪👊👊

@elihalverson3644

5 жыл бұрын

@@richduperbash2966 I'm glad arrma listens to their customers unlike cough cough Traxxas cough cough

Bro you got the v4.....I'm jealous. I can't wait to get mine. My hobby shop told me I can get one on April 28th. Badass bro

@rcjer6473

5 жыл бұрын

Awesome bro I'm so excited I got that April 28-day mark on my calendar so I can go right down the the shop and pick it up. how are you guys able to get it early

@rcjer6473

5 жыл бұрын

Lesperansager...............I just saw this morning that I can order it from Horizon Hobbies now so now I just need to put some money away from each check and I'll be getting that beautiful machine soon. How does it drive?

That guy says arrma he must not know arrma too well your the king basher of arrma lol