I'm so happy to see you doing videos again! Awesome!!

@TheRCNetwork

9 ай бұрын

Thanks buddy! 4 videos dropped today - check them out!

Welcome Back Rich, good to see you making videos again. Watching all the videos you uploaded.

@TheRCNetwork

9 ай бұрын

Nice! Thanks for stopping by!

Glad you're still making videos Rich! Thanks

@TheRCNetwork

9 ай бұрын

Thanks Jonny! It's fun to film these trucks

Great to see you doing videos again. I always love watching your channel you got great content and lots of information . I agree on that motor mount I don’t like it but it’s a great looking rig and you always do some very nice clean builds 👍🏽🤙🏽😁

@TheRCNetwork

9 ай бұрын

Thanks buddy! I've always tried to provide the best view of the RC vs. myself. I agree on the truck - its good looking and drives great!

Welcome back hope all has been going well! love the build super clean as always!

@TheRCNetwork

9 ай бұрын

Thanks buddy! It was a fun build. 4 videos released today - check them out!

Been out of r.c for 6 years. Getting back in as a basher at first. Kit arrived today. Just put in orders for parts. Running your Protek servo choice with the Flo Tek body. Painting it with the Tamiya paints and the Pro Line mask. Thanks Rich for helping us onboard. Nearest track 1 hour away so plan to bash it mostly. Bought the body mounting kit from Tekno. Plan to run 2s with the 4300 motor and their think Gen2 Esc.

@TheRCNetwork

9 ай бұрын

Glad to help buddy! If you have any questions, just ask!

Building Now, Half way through. About to open Bag K and mount the same 2s system you displayed, Tekin RX8 Gen3 w/ Pro4 HD Redline Motor and 16t Pinion. Gonna try her with the new RadioMaster MT12 with ExpressLRS. Also built her with Carbon Fiber front and rear shock towers. Stock rear tower weight is 1.2oz, Carbon Fiber rear weighs 0.6oz, that’s half cut in the front and rear. Purchased front and rear Skid Plates, add a little lower Cg weight.

@TheRCNetwork

2 ай бұрын

Nice! It’s a great truck and great build. Enjoy!

All enjoyment watching your videos❤ every time great style📹🎬 so thankful 🙏 taking the time showing an explaining so much 🙌

@TheRCNetwork

9 ай бұрын

Thanks buddy! I truly appreciate the kind words. 4 videos dropped today...make sure and check them out!

I'm happy to see you doing more race oriented videos for a good videos. That's all we dabble in. Especially the kyosho video. I loved it even though it was an RTR

@TheRCNetwork

9 ай бұрын

Thanks! Tekno make great RC's and it's hard to pass up a new truck from them.

Thanks for the video. I'm getting mine in April for some local New England 2S racing and it gave a lot of great info.

@TheRCNetwork

5 ай бұрын

Nice! Enjoy building and driving!

Nice to See you again 👍

@TheRCNetwork

9 ай бұрын

Thanks buddy!

Great job man it looks rad

@TheRCNetwork

9 ай бұрын

Thanks Jonny!

My build : Max8 g2, 4268g2 2500kv, 20 tooth pinion gear, 4s, proline badland SC. Love my new build. Great improvement from the sct410.3. Waiting for the airguards (a must have on the sct410.3)

@TheRCNetwork

9 ай бұрын

Nice! that's some serious power...keep track of that driveline and report back how it does with constant 4s power!

ur back!!!!! Yay

@TheRCNetwork

9 ай бұрын

Kinda....but only for a fun truck like this one!

4 videos today! wow when you come back you really comeback!🎉😊

@TheRCNetwork

9 ай бұрын

Thanks! nearly 45 minutes of finished video. Over 200GB of unedited footage to make these!

Looks so nice! Upgraded from Traxxas to AE for racing. Tekno will be my next victim.

@TheRCNetwork

9 ай бұрын

I'll tell you, going from AE to Tekno will be a huge difference....what I noticed is that the kits go together so much better. No missing parts and the directions are so much clearer. Also, durability is great with Tekno

That's a beautiful setup bro!!!

@TheRCNetwork

7 ай бұрын

Thanks George, I appreciate the kind words

Awesome video! I disagreed on 1 part though. SCT had always been great, people just seem to have forgotten. But i do get your point anyways. SCT is my favorite to drive, any and all!

@TheRCNetwork

9 ай бұрын

SCT was my first love of RC - the Traxxas Slash 4x4 in 2010. Then got an SCTE, well actually 3 of them....then the original SCT410. I've probably had about 20+ SCT's (mostly RTR's) over the years....but the Tekno has always been my favorite. The 2.0 easily trumps the 410.3

@Rek_Rc

9 ай бұрын

@@TheRCNetwork the new tekno really is kind of the best of all the well known SCT's out there all in one. It's nice like a Traxxas, race ready like a losi or a TA, tough and fast like a Senton BLX. All in one truck. Very impressive!

@TheRCNetwork

9 ай бұрын

I can't agree more.

Big fan of Tekin. Still using an RX8 G2 in one of my Losi TLR SCT's. Kinda treat my Tekin gear with kit gloves as theyre so tricky to source in the UK

@TheRCNetwork

9 ай бұрын

Ah, cool! Yes, Tekin stuff is great...and always my goto for 1/8th scale.

You are back! Really miss your videos.

@TheRCNetwork

9 ай бұрын

Yep, I'm back. Not sure how often I'll post, but when I see cool RC stuff, I'll be there!

Nice. I have a 4600kV and had to put a 16t on it since, you know, it won't accept anything less (even though it says a 15t). We're going to have to hit up Huckleberry for a play date!

@TheRCNetwork

9 ай бұрын

Agreed! Let me know

It’s been a minute since you posted something awesome truck

@TheRCNetwork

9 ай бұрын

It sure has! over 2 years now....4 videos dropped today - check them out!

So is the esc and motor chose good for the weight of this truck? I love the build direction you went for. Just confused with what electronics to go for. Read all the comments here and between Tekin and hobby wing.

@TheRCNetwork

3 ай бұрын

It's ideal IMO - If you're racing it's one of the best options for SCT. If I were just bashing, I would swap out the 4300kv on 2s for a 3000kv on 3s. The 3s system will be better and less stress on everything vs. the 2s system (especially the batteries). Between Tekin and Hobbywing, I always prefer Tekin for my 1/8th scale systems like this one. For 1/10th scales (like buggies) I prefer the Hobbywing

Flaw: 8:18 They will probably release a sliding motor mount for easy gear mesh adjustings.

@TheRCNetwork

9 ай бұрын

I kind of doubt it. It would require removing the cover and modding the side guard to get the motor in and out. There’s team drivers already modding it this way with the EB48 2.1 mount

wow, going to sell my slash ult and buy this babe :)

@TheRCNetwork

Ай бұрын

You will be amazed on the difference.

Totally agree on the fixed motor mount. It should not be on a high end kit like Tekno. Arrma 3s line even changed from the fixed motor mounts 😂

@TheRCNetwork

9 ай бұрын

Yeah, I didn't expect to see this on a Tekno. They pride themselves on race-born vehicles. I bet their drivers hate this design as well...but all my opinion.

Hey, Rich is back with another vid!

@TheRCNetwork

9 ай бұрын

Yep, 4 videos dropped today...check them out!

@AsurasWrath164

9 ай бұрын

@@TheRCNetwork found out already and watched 😄

Would you do a video on what you would use to build a U4 racer with the kits and parts Tekno has now? The DB 48 had some great mods and engineering, but that kit is no longer available.

@TheRCNetwork

5 ай бұрын

I haven't looked lately at converting a DB48 "2.0" with the new gen's from Tekno. When I built the original DB48, the main issue I had was keeping the 12mm hexes, as that was the only option at them time for racing as 17mm hexed wheels were not allowed....or would even fit. Now, with 17mm hex wheels being allowed and now available, I would start with the EB48 2.1.....and add the ET48 2.0 chassis to start. I would ask Tekno directly as they probably already know the answer...or have had people ask

Very nice

@TheRCNetwork

9 ай бұрын

Thanks for watching! 4 videos uploaded on Tuesday - check them out!

@rcjoe406

9 ай бұрын

@@TheRCNetwork Kool will do

I have a spare lrp dynamic 10L motor. 😅😅 Would go nicely in one of these wouldnt it.

@TheRCNetwork

9 ай бұрын

Might go well....

Loved the video. With your motor and ESC. Could I use a Spektrum Smart Battery 2s Lipo in that same setup as yours? Thanks. Scott

@TheRCNetwork

9 ай бұрын

Yes, you can....but the "smart features" will not operate. You can just solder a regular plug onto the ESC (I believe your battery has an IC5 connector....the EC5 will be the non-smart version)

@scottstafford3550

9 ай бұрын

Thanks what kind of charger do you use with that style battery you have for bullet connectors?

@TheRCNetwork

8 ай бұрын

I use the Team Orion Touch Duo charger...with 5mm bullet leads

Great video, thanks. Just starting my build. I am leaning toward running a HW EZ run max 10 2400 KV motor with an 18 pinion on 3 s with the option of trying 4s down the road. Do you think I would be better off with the HW 3200 KV with the optional motor mount? Not racing, just for fun and bashing…

@TheRCNetwork

9 ай бұрын

Two things….1. the Max 10 ESC might not be enough ESC for this truck (she’s heavy….the truck that is) better check what it’s rated. The 2400 will be quite slow on 3s…..even with an 18t. The sweet spot for 3s is usually 3000-3200kv, but you’ll likely need that other motor mount to get a 15t on there

@michaelwaring3283

9 ай бұрын

Great, thanks for the advice. I will re think my set up. 👍🏻@@TheRCNetwork

@michaelwaring3283

9 ай бұрын

You were nice enough to answer my last question so here I go again. I would like to stick with a Hobbywing combo as I have been loving them in my crawler builds. Do you think an EZrun Max 8 G2 combo or Xerun XR8 Pro G3 combo would be a good fit? I do like that the EZrun version is water proof. Thanks, Mike. @@TheRCNetwork

@TheRCNetwork

9 ай бұрын

If I were building it with Hobbywing, I'd put the XR8 Pro G3 and the 3660 3200kv motor in it on 3s. If I were to do the EZrun, it would be the Max8 combo - 2500kv...but it's slightly out of the sweet spot for 3s and will run hot on 4s. You can mess with gearing to compensate...but keep in mind, the stop set up is designed for 2s weight. If you start adding a 4s brick, 4268 motor, etc....the suspension will be pretty soft, diff fluids slightly off.

@michaelwaring3283

9 ай бұрын

Thank you for that. XR8 it is. 👍@@TheRCNetwork

I like the rx8 esc, but the switch is the worst. I really wish theyd replace it with a button switch like the hobbywing

@TheRCNetwork

9 ай бұрын

I've found the Hobbywing button switched to get clogged with fine sand.....they're not perfect either

@michaelinzitari

9 ай бұрын

I’ve got waterproof switches on all my wet weather bashers. They are great! Yes I’m using hobbywing and hobbywing clones

Do you know if 410.3 and SL bodies will fit? The SL body worked with my 410.3 so maybe it will fit the 2.0

@TheRCNetwork

9 ай бұрын

Most SCT bodies will fit. I'm running the JC Illusion Hi Flow. It fits pretty good

@CrashCourseRC86

9 ай бұрын

@@TheRCNetwork Thanks! I was more thinking of body hole alignment, I have a brand new body for the SL and 410.3 (holes already in) would be nice if it would fit the new 2.0

@TheRCNetwork

9 ай бұрын

Maybe? I know in the owners manual, they state the older body posts also fit (or maybe they have a new part number for the SCT410 2.0) - you remember the ones that had several different offset posts? That could correct the issue if there is one.

@CrashCourseRC86

9 ай бұрын

That would be great if the old bodies will fit. Working on the build now hopefully will know soon! Thanks! Keep making sweet vids!@@TheRCNetwork

Would you consider this a better platform for a DB48 conversion?

@TheRCNetwork

8 ай бұрын

Loaded question there. It quite possibly can be, but it would need to also work with the ET48 2.0 parts, which hasn't been tested yet. Just considering the motor mount, I doubt that the SCT410 2.0 and ET48 2.0 would match up let alone all of the other parts - chassis braces, driveshafts, etc. One thing to consider now though is the EB48 2.1 as a starting platform as the ET48 2.0 should fit. When I built my original DB48, the major issue was having 12mm hexes for the current (2017) line of wheels and tires available. Now, there are 17mm SCT wheels and SCT Hyrax tires available.

I want to build one. 2s

@TheRCNetwork

7 ай бұрын

Build it the way I did - it's pretty much a race truck on 2s

the correct size pinion is M1 or M0.8?

@TheRCNetwork

3 ай бұрын

Mod 1 for the pinions on this

Man haven’t seen you for a while.

@TheRCNetwork

7 ай бұрын

Neither have I! lol.

8:22 is the flaw in the video for anybody scrolling or short on time. It's a small one IMO but it's the motor mount. Take that for what it's worth.

@TheRCNetwork

9 ай бұрын

It sure is....and I'm getting all sorts of crap from the Tekno fan boys....and I'M a TEKNO FANBOY!

👍🏾

@TheRCNetwork

9 ай бұрын

Thanks buddy! I appreciate you stopping by! 4 videos dropped today - check them out!

Overall, great video. Excellent body choice...if I get the chassis kit, I'd be getting the same body. As for the 'flaw', there really isn't one...at least, not what you're considering as a 'flaw'. The "problem" is having chosen to use such a high kv motor. Most people running this on 2S for bashing will be running a motor closer to 4000kv, thus the pinion range on the motor mount would be considered "accurate". In regards to reaching, most tracks running an SCT class are running 13.5T motors, which is closer to a 3500kv equivalency.

@TheRCNetwork

9 ай бұрын

Thanks for watching. The "flaw" was two fold: 1. It proves hard to swap a pinion. With a sliding mount, you loosen two screws and you're changing a pinion. This one, you're removing most of the center section. 2. Pinion choice - for 4300kv 2s, you have 1 choice - 16t. 15t is not compatible with the stock mount. From what I see most SCT guys are running 4300kv 550 or 4600kv 540 - al on 2s. For the 4600, no pinion will work with the stock mount. With that, if I were building a 3s truck, the real sweet spot is either a 3000kv Tekin or a 3200kv Hobbywing.....which puts you in the same boat - nothing will work for the 3200kv and only a 16t will work for the 3000kv. IMO, the 3500kv is too slow for 2s and will run hot on 3s.

@ninthislandrc

9 ай бұрын

@@TheRCNetwork What you ignoring is that, for most tracks running 1/10 SCT outdoors, and all indoor tracks, they're only running 2S. Yes, the truck can be used for bashing. But, it was designed/developed as a competition vehicle...and, as a competition vehicle, it's going to be running a 13.5T motor on 2S - that's what ROAR dictates, so that's what almost all clubs run.

@TheRCNetwork

9 ай бұрын

I'll respectfully disagree with you. 1. Tekno designed this as a hybrid truck - can be raced, can be bashed. If it were 100% race, it would have come with adjustable geometry in the box. I spoke to them about this exact thing. 2. I know that there's a 2s rule for Roar...which is why I set it up that way from the beginning. 3. I'd love to see a 13.5t, 2 pole 540 canned motor in this truck. It will literally explode being the truck is nearing 8lbs. BTW, ROAR only dictates voltage (2s) and motor can size (540/550), not turn/kv (at least for the 2023 rules). You might be able to run that 13.5t in the SL or a 2wd, but in this truck....nope.

@dang3402

4 ай бұрын

Dam. I’m in the process of building and can’t decide on the motor and esc. I’m reading all these comments and I’m confused. What combo well be good for the weight of this truck

New here lets jam!

@TheRCNetwork

9 ай бұрын

Let's go! 4 videos uploaded this morning....be sure to subscribe!

The crappy thing with SC trucks is they let so much air under the body. Without wheely bars they hit a certain speed and simply flip backwards. Definitely don't try push speeds with a head-on wind. 3s is more than enough for any of these type of RCs

@TheRCNetwork

9 ай бұрын

Very true on the bodies.....parachute effect is real!

@user-ud5xw8ox8g

9 ай бұрын

@@TheRCNetwork vent holes are the answer

@TheRCNetwork

9 ай бұрын

@@user-ud5xw8ox8g watch the video, I cover this

Are you back?

@TheRCNetwork

9 ай бұрын

For Tekno, I am! We will see though....I had a blast driving last week.....haven't picked up a remote in over 2 years!

@meirdeaph

9 ай бұрын

Evin if it is just a short stop back ill take what I can get😅 really is cool tho.I think I was just getting into hobby when you started your break😊

Alright 4th to 5th video on this today.

@TheRCNetwork

9 ай бұрын

Nice! nearly 45 minutes of edited video! Yay!

3s with Tekin gear. 1/8 buggy wheels.

@TheRCNetwork

9 ай бұрын

A 3000kv Tekin Pro4HD would be ideal....and yes, buggy wheels for that added momentum

@hanau73

9 ай бұрын

I went with the 3500kv . Great video series …I really enjoyed it.

@TheRCNetwork

9 ай бұрын

Nice!

OHYEAH в конце єто матюк на русском)

@TheRCNetwork

4 ай бұрын

Really?

Yea they need to get away from those stupid new motor mounts! If you are at a race and need to switch pinions in a hurry it aint happening! Tekno I know your watching the comments! Stop using these motor mounts!

@TheRCNetwork

9 ай бұрын

I 100% agree. I get the business decision for the cost, but this is a kit and deserves at least a fully capable mount. I held off my opinion during the first two videos, but couldn't leave it alone for the third when I realized how much of a pain it will be to swap pinions

The way you leave almost no space between sentences after editing, is that intentional? Is it a style? I hear this quite a lot, and it's jarring. No human speaks that way.

@TheRCNetwork

9 ай бұрын

It's all editing style. I've found that a well edited concise 10 minute video does much better (less people falling off) than a 16 minute video with a bunch of silent sections and "uhms"

Theres a few. 1 it jumps like shit the small hole pistons r in rear. Oils 2 thick. Alot of slop even for a tekno. And its really front heavy

@TheRCNetwork

9 күн бұрын

Well, I disagree with the jumping.....I thought mine jumped great in stock config. The track I was at was quite blown out, but the jumps that had a good face, made it soar like in the opening scene. Slop wise, I also disagree....I thought that it was fine and on par with their other vehicles. Sure, it's not touring car precise or even 1/10th scale buggy precise, but it's solid for what it is. For the shocks - I agree. It should have come with the 17mm shocks. And don't get me started on the motor mount 😁

@adrastos123

9 күн бұрын

@@TheRCNetwork mayb its my super blown out low grip dusty tracks but i lowered shock oils to 45, 40 ae oils. Swapped pistons front to rear. Went to green rear springs and added a 20 gram weight 2 rear for it to feel good on track