Would like to see which fuse you would run the daytime running lights wire into.

Great job on this video!!! Really love the tape trick for the aligning the lights! A lot of people forget to mark the original lights before removing them!!!

Saw this video on Tuesday, ordered, and got them today. Lights look and work fantastic. Was able to fuse tap into a fuse for the DRLs as well. Thanks for the video and review!

@TacticalJK

3 жыл бұрын

Awesome!!!

@bsmith9781

3 жыл бұрын

My lights just arrived and I want to fuse tap the DRL’s in the fuse box. Which fuse position did you place the tap. Photos or specific location is greatly appreciated so I don’t short anything out, thx!

@Astigma981

3 жыл бұрын

@@bsmith9781 I used Fuse M8, on 2018 JK.

looks great. your high beam demo really helped me make the decision. so many cheap headlights have great low beams but almost no high beams. Thanks a lot.

@RTM459

3 жыл бұрын

I’ve had these for a year and still going strong the high beam are nuts

@philipschutter1626

3 жыл бұрын

@@RTM459 thanks I have to get something better for my jk brute. Would these work in a 97 wrangler? Want to get some for my older brute as well.

@RTM459

3 жыл бұрын

@@philipschutter1626 long as they are 7 inches they should work I have a jlu and used adapters

Found it =) thanks. You are so right about the stock headlights. Been looking for new ones for a while.

@TacticalJK

4 жыл бұрын

Glad you found it. Good luck!

Thanks for this! just what I needed. the instructions from the seller are so simple that they are complicated!

@TacticalJK

4 жыл бұрын

Glad I could help!😀

Gonna be my next set of headlights for sure!

@TacticalJK

4 жыл бұрын

heck yeah!

Nice wiring breakdown. Thanks. Putting these in my humvee build and couldn't figure out what the red wire did. Rest all checks per the bench test! thanks

Ty for this vid. Bought and installed successfully !! One of the best upgrades I have done in a while. De stock lights are so bad, wow. I see the road now =D Since I live in Belgium I have an European JK (2012 rubicon) and the DRL wiring was even easier. The stock light had a mini light bulb plugged in the man light dome as DRL. Connected to red one with the positive end and everything works as stock. Realy happy with the result Thumbs up!

I like those LED, headlights, great job doing your video, tks

I love how your Jeep looks!!! Mine is almost built the same way.

@TacticalJK

4 жыл бұрын

Thats awesome! Im really happy with the way its turning out😃

Dang those look hella good. Definitely makes the Jeep stand out for sure

@TacticalJK

4 жыл бұрын

Thanks! I 100% agree!

Will consider these for sure. Not a fan of halos but might wire them to the turn signal. Just to be different

Looks good! Thanks for sharing and good job and explaining!

@TacticalJK

3 жыл бұрын

Thanks!!!!!!!

Great job you did there, I really liked your video! Subscribed, hope to see more!

@TacticalJK

3 жыл бұрын

Thank you. I really appreciate it!!!

Great job on the video dude. Really well done. Just subscribed. Look forward to the others.

@TacticalJK

3 жыл бұрын

Thanks so much!!

Great video pal!! I have the same lights in my tj wrangler 2004 and those lights gives my Jeep a nice touch

@TacticalJK

4 жыл бұрын

Thanks! Im sure they look great on your rig!

Great review!

Hey I really need these lights. Thanks!!

@longreach207

3 жыл бұрын

Me too! Me too!!

This review was so good I stopped looking at the other LEDS that's was about to buy and order these instead. They be in today 😎 Thanks

@TacticalJK

3 жыл бұрын

Glad you found it helpful!

@MrDmagic88

3 жыл бұрын

@@TacticalJK unfortunately my 89 raider wouldn't power them up🤷🏾‍♂️

@2011lafayette

2 жыл бұрын

Same here , watched the video and put an order . Thanks .

Great Job. Headed over to buy them now. Ty

Awesome video dude, had a lot of problems with different headlights on my Jk and I saw these lights and the price, and was kind of suspicious about them cause also saw some bad amazon reviews but they definitely look like solid lights for the price. Awesome video!

@TacticalJK

2 жыл бұрын

Thanks!

I bought these lights and installed them today. Thanks for the video and install tips.

@dougcoleburn1579

Жыл бұрын

how are headlights working now?

@mattbayer3986

Жыл бұрын

Still work great. Nice and bright.

@dougcoleburn1579

Жыл бұрын

@@mattbayer3986 thanks! Any trouble with install? I’ve seen a few comments that they have trouble installing. Thanks

@mattbayer3986

Жыл бұрын

@@dougcoleburn1579 I did not have any trouble. No trimming or anything like that. There is a lot of wire behind the light that had to be tucked away but that was easy.

@dougcoleburn1579

Жыл бұрын

@@mattbayer3986 many thanks

Just got a new to me JK Willys edition and definitely need to upgrade those headlights and that would be great if I won a set of these. Enjoyed the review!!

@TacticalJK

4 жыл бұрын

Thanks! And good luck!

Thank you for your video I push the buy it now for theses light's 😁

@TacticalJK

3 жыл бұрын

Awesome!!

Great job on the video

@TacticalJK

3 жыл бұрын

Thanks!

This video was well done!

@TacticalJK

3 жыл бұрын

Thank you!!

Great video. Very good job. Informative.

@TacticalJK

2 жыл бұрын

Thank you!

Great video...thanks !

Those are awesome, would love to score a set.

@TacticalJK

4 жыл бұрын

Thanks! Good luck

Could you describe the daytime option in more detail?

I don’t comment much on videos but yours was professional and detailed….nice job

@TacticalJK

Жыл бұрын

Thanks!

Good Job on the video

@TacticalJK

4 жыл бұрын

Thanks!!!

Yoooo I need these in my life 💪🏼

@TacticalJK

4 жыл бұрын

Right!!! Good luck!

Great video.

@TacticalJK

3 жыл бұрын

Thank you!

Got these. Low beams (dipped in UK) were faulty and just randomly turned on and off when they were supposed to be steady on. Halo and High beam were fine. Can’t wait 2 weeks for delivery for replacement. Shame - looked good when they worked.

Definitely a life saving video! Thanks for making it! Installing those same ones right now ✌🏻

@TacticalJK

2 жыл бұрын

Thanks! Hope they turn out great!

Great headlights . Hope to win them 🤲🏻

@TacticalJK

4 жыл бұрын

Good luck :)

I have 2016 Jeep wrangler in Canada. I installed as above. Once I shift to drive and release the park, DRL is on( both low and high beam are on ) 😂I got a lot flash from oncoming vehicles. So I have to drive low beam during daytime.

Just bought my pair

@TacticalJK

4 жыл бұрын

Hope you like them!

Wow looks amazing I made my choice

@TacticalJK

3 жыл бұрын

Awesome!

Do you have a video of how to hook up the daytime running lights?

Great video. Was wondering how they are holding up now that you have had them on the jeep for some time now. I am in need of some new lights because my current LEDs are very unreliable. I like the looks of these a lot but don't want to deal with another finicky pair. Thanks!

@TacticalJK

3 жыл бұрын

Hey! So I haven’t had any issues so far. No flickering, no fading, and just as bright as before. I’m very happy with them

These look amazing and would definitely be an upgrade on my current setup. Hope I win! 👍

@TacticalJK

4 жыл бұрын

Best of luck to you!

You know if it's the same plug and play as the 2018 model? I want to swap these on my miata since I prefer the middle LED compare to the other model

Can you give me the name & model or link to these lights. They look promising. Do you know if they make fog lights to match?

Hey, these lights look sweet! Any reviews of long term use?

@TacticalJK

3 жыл бұрын

They pass by my review. Halos and headlights are still just as bright, and haven’t had any issues with fading or flickering. Hopefully someone can provide a longer-term review than mine!

What do i need to install these once i've purchased them?

Will this work on a 20 JL ? If not, which do you recommend for a 20 JL? Thanks!

Great video. What color (hot) wire did you tap into for the Halos from the front direction/markers @ 4:39

@TacticalJK

3 жыл бұрын

I didn’t tap into the front markers on the final setup, I tapped into the fog lights b/c of the way I have my jeep programmed. I am fairly sure that I tapped into the middle wire of the markers during the shot you referenced, but it did not work great as the Jeep set off a low light voltage check engine light, so I changed it. It might could work tho, but I wouldn’t recommend that method from my experience

I picked these up after watching your video, and really like the look of the lights! Unfortunately they don't seem to fit very well on my 2018 JKU. Only one of the tabs in the headlight bucket/mount lines up with the LED light. I'm hoping to figure out what I can trim/adjust to make them seat properly.

@TacticalJK

2 жыл бұрын

So Sorry for the late reply!!Im sure you have the issue fixed by now, but if not the fix seems to be just putting on the retainer ring. It should balance everything out and hold it solidly in place regardless of the issue. Hope you were able to get them working!

@dougcoleburn1579

Жыл бұрын

did you find a fix to the issue?

I have a 1985 Jeep cj-7. Will these work for my Jeep? Awesome video also. You earned a sub

@TacticalJK

3 жыл бұрын

Hey, thanks!! I checked the amazon listing and, according to it, they should fit👍🏼

@austinjames6298

3 жыл бұрын

Tactical JK alright, thank you very much

Those look great! Hoping I can win a set 🤞😆

@TacticalJK

4 жыл бұрын

Best of luck to you!

Great review., thanks. Which fog lights would you suggest to pair with these headlights? tail lights also please? 2007 sahara

@TacticalJK

3 жыл бұрын

I made a vid on the taillights, and they are great: kzread.info/dash/bejne/eYN7q9Wkos_WdcY.html As far as fog lights, unfortunately haven’t test any!

These are sick ! How are they holding up?

@TacticalJK

2 жыл бұрын

Good so far! No issues with fading or flickering. Would definitely still recommend

My crappy amazon headlights stopped working not long ago! I need these so bad ! And great video to add to it

@TacticalJK

4 жыл бұрын

Thanks - and good luck!

Great videos. I have a 2016 JKU Sahara as well and I’m definitely doing the head and tail lights. I was just looking at the 305/70r18 Coopers too. What lift did you go with and do you like the ride? Thanks

@TacticalJK

2 жыл бұрын

Hey! I have a 2.5 in teraflex lift, I believe it is this one amzn.to/3DZ0y12 . I actually moved it from my old jeep, so it has been used for over 4 years and has held up great. I think it rides good, but i dont have anything to compare it too. I wasn’t able to tell a ride difference after switching from stock, but I didn’t pay too much attention to it.

@stevec899

2 жыл бұрын

@@TacticalJK thanks man!

They match your grill.

@TacticalJK

3 жыл бұрын

Right!!

Hello men, these headlights fits to my classic mini 7' inches headlights? Also do you know the headlights name to search them for Europe - Greece? thanks.

Are these dedicated to Jeeps only or do you think they’d work on other vehicles with round 7 inch lamps?

Thanks! I got these, installing this weekend. I like your jeep, what size rubber do you have? Is it lifted? Thanks again!

@TacticalJK

3 жыл бұрын

Thanks!!! 2.5 in teraflex lift with 35 in stt pros!

@IaMCdN1

3 жыл бұрын

@@TacticalJK I was hoping you’d say that! Beautiful, really like the stock rims but big look

I just installed a pair today can't wait for it to get dark

Great video.how are these lights holding up ?

@TacticalJK

3 жыл бұрын

Haven’t had any issues at all. No fading or flickering. Would recommend!

Great video and tips! I just ordered mine on Amazon through your link, but it's saying delivery is between May 22nd and June 15th? is that Accurate? Do you know what I can do to get sooner?

@TacticalJK

4 жыл бұрын

Thank you😁! But I’m sorry to say I’m not sure about the delivery times😞 You may want to try contacting Audexen directly through their social media/website.

Are these available for the 2020 gladiator? Got the gladiator sport

I got this light after watch this video. installed, Lights look and work fantastic. Was able to fuse tap into a fuse Box for the DRLs as well. Thanks for the video and review! But there is a problem, when headlight switch off, Low and High beam will be on when gear is not in P position. Everything is normal when headlight switch is on position. Do you know where is the problem came from? Thanks

@TacticalJK

3 жыл бұрын

Hey! It is likely that your Jeep is set to run the highbeams as a factory Daytime running light , so it sends power to the lights when the vehicle is in drive, but stops sending power when the vehicle is parked. This is not the normal setting for U.S.A Jeeps, but jeeps in many other countries are sold with that setting to meet regulations. It would have done that with the old headlights as well, if what I am thinking is true. If your jeep is set up to run the highbeams as DRL, then unfortunately the only way to turn that setting off would be to reprogram the Jeep.

@user-xd1cr5wt1e

7 ай бұрын

I have the same problem. 😂 now my DRL is too bright and have to switch to low beam even driving in daytime.

Great job,, are they still working? Btw how big are your tires and how many inch is the lift kit u have on?

@TacticalJK

2 жыл бұрын

Still working great! And 35s on a 2.5in lift

I'm confused about your statement on the wiring of the DRL. You mention you don't have fog lights on your bumper, but you installed them on that wire harness? You show the blinker light, did you power the DRL off that? What slot in the fuse box exactly did you use before as you mentioned the easier method?

@TacticalJK

4 ай бұрын

For my setup i wired my drls into my fog light wiring harnesses , and then programmed my jeep to run the fog lights at all times, so the drls stay on. For the wiring in the fuse box just search up jeep jk halo wiring on youtube because i do no remember, thanks!

Have you noticed any major heat coming from the back of the headlight housing that has affected any of the Jeep wiring that is ran close to the back of the headlights once installed? I ordered a set but they fit so tight to all the wiring when pushed into mounting ring, I was thinking if they get hot it’ll melt some important wiring. As a rule, I thought LED lights produced a lot of heat that usually needs fans to cool them.

@TacticalJK

2 жыл бұрын

Hey! So I didn’t notice any issues when I took mine off a few weeks ago (to test some other stuff). I have had several 4 hr + night road trips with them on in the past few years. I don’t think they really get that hot.

How would these be in a snowy climate? I have hard that they do not generate enough heat to keep the lenses clear of snow, or frost.

@TacticalJK

2 жыл бұрын

Sorry for the late responses. They definitely don’t get hot like normal bulbs, so I doubt they could melt much snow or frost. Hopefully someone from a colder climate can chime in!

I have a 2017 Jeep Wrangler Unlimited Big Bear. I bought these Audexen headlights and fog lights with the halo light. I had my mechanic instal them but they are not working as fully intended. He tells me it's because my lights are computer controlled. Does anyone know a way around this?

Will these work the same way in a Canadian JLU?

I have a 2006 liberty, do you think these will fit ?

How can it be that the LED ring is connected to the Blicker?

Are they available for Jeep Wrangler sport 2021? Not sure if it’s jl or not..

Do I need to buy more wire for the halo lights?. Love these

@TacticalJK

Жыл бұрын

I think they come with enough wire, but a fuse tap might be a good purchase for the fusebox connection!

Does this fit on a 2022 jeep witout any codification or dash light?

Did you have any problems With your headlighs? Are you still using them? Regards mauro.

Would love to win a pair of these!

@TacticalJK

4 жыл бұрын

Good luck!

How do you get just the LEDs to come on by themselves? I hooked up into the fuse box. The only time the LEDs will stay on by themselves without the headlights is when it's in neutral. Soon as you take off emergency brake the lights come on

@TacticalJK

Жыл бұрын

Your jeep is probably set to run the main beams all the time as DRLs. That's not standard for USA jeeps, but USA jeeps can be configured that way way to fix that would be to get a JSAN tool and change your jeep's DRL setting.

Hey man great video ! thanks for sharing I just need your help to choose the right color are the headlight installed on your jeep the patent black or silver color on amazon there is 2 version of those and I am confused which one to choose I have a jeep willis 2016 rhino color I like the one you installed I guess they are the one with the patent black kindly confirm thanks for

@TacticalJK

3 жыл бұрын

Hey! I have the black ones

@abboudissa8648

3 жыл бұрын

@@TacticalJK thanks a lot man will get the same :)

Do you have a video with the change of this mask? (Black and grey)

@TacticalJK

3 жыл бұрын

Hey! Im afraid I don’t understand what you mean

wondering how these lights are keeping up since you installed them few months back. Thanks.

@TacticalJK

3 жыл бұрын

They still are working great and looking the same. No change that I can tell

thinking about picking up these lights. How are they holding up thus far. My last amazon halo lights burnt out .

@TacticalJK

3 жыл бұрын

No issues so far. The halos don’t seem to have dimmed any, and the lens shows no signs of fading. Would definitely recommend 👍

Have you had any moisture buildup in the headlights yet? Thats kinda a concern for me. Im yet trying to decide wht headlight and taillights to go with. Im liking your headlights and taillights alot.

@TacticalJK

3 жыл бұрын

I would definitely still recommend both. No issues with any moisture in either the headlights or taillights👍🏼

@thegospelhomestead

3 жыл бұрын

@@TacticalJK thanks!

Thx for the video...got mine today after backordered. ? 2015 jku passenger side fit in the bucket fine but drivers side tabs don’t want to seat in the bucket around the 10-11 o’clock position leaving a gap. If anyone has any info or pictures I’d appreciate it. Thanks again

@TacticalJK

4 жыл бұрын

Hate that your having an issue with the lights :( I would try tightening on the retainer ring over the lights , as it should hold the headlight in place regardless of the fit. It may actually force the tab into place once you get it secured. Just something to try - thanks!

@Harveje

4 жыл бұрын

Tactical JK Thanks I did that and it did close the gap a I think the back of the light is hitting either the bucket or something behind it and I can’t get a good angle to see. I’m not a fan of jeeps headlight holding, aligning, and positioning design. I do like the lights and if they hold up it’ll be worth the effort to get them to fit

Hey dude,just got the exact same headlight as yours, put it on this evening, the new LED headlight seems project much higher light than the stock headlight, wondering if you had the same issue, is there any solutions? Tried the Headlight adjustment next to the hazard, still too high, there's two screws inside the headlight cup, tried, that only adjust the headlight from left to right slightly

@TacticalJK

3 жыл бұрын

Hey! So you tired the adjuster that I used at 5:00 in the video? Thats the only way I know to bring them down, but it had a ton more adjustment than I needed in my case

It would have been nice to have a little more detailed explanation on the electrical aspect of the installation...

I got these for pretty cheap and am Curious why I can’t get them straight. The middle light is slightly slanted as it doesn’t fit properly. Any tips? Great video btw

@TacticalJK

2 жыл бұрын

Hey! I am not sure about getting the straight, I only know how to adjust them horizontally and vertically. I might would try getting them aligned straight (even uf they don’t fit in the notches right) and then tightening the retaining ring down in whatever position they are in. I would think the retaining ring could hold it in place even if everything doesn’t align perfectly in the brackets. Hope you are able to get it working!!!

What front bumper do you have? Looks nice

@TacticalJK

4 жыл бұрын

Thanks! Its a smittybilt XRC MOD front bumper! I made a review video for it a few years ago if your wanna check it out ( really old vid tho😬). I have been happy with it!

Just got mine, but they don't quite fit. Did you have to buzz any part housing to make them fit? I have a 2015 wrangler JK.

@TacticalJK

2 жыл бұрын

Hey, several others have unfortunately had this issue, where one of the tabs doesn’t exactly fall into place. The best strategy is to just put on the retainer ring. The retainer ring should hold it solidly in place regardless of the issue. Hope you are able to get them working!!

Do these lights cause glare for oncoming cars - I’ve previously brought led 7inch for my Jeep and despite adjusting to correct height, the light pattern causes glare and I often get oncoming vehicles flash lights at me ?

@user-xd1cr5wt1e

7 ай бұрын

Yes, I got a lot because of the DRL is both low and high beam on

Are they still working?

How have these headlights preformed after you installed them? Are you still happy with them?

@TacticalJK

4 ай бұрын

Yes, have been running them for years now and zero issues. Im really impressed with them

How you can conect the day time running lights to work with the low beam light?

@TacticalJK

3 жыл бұрын

That is their default. The drl ring will always shine with the low beams, even if you don’t have drl wire connected to anything.

Do you know if these are available for a 2019 JL?

@TacticalJK

4 жыл бұрын

Yes they are, here is a link: amzn.to/2LtlEeh

Are those headlights the black or silver ? I’m looking to buy the exact ones you got on your JK

@TacticalJK

3 жыл бұрын

They are the black ones

Didn’t really wanna go through all the comments but would they fit a 22 wrangler jl

@TacticalJK

Жыл бұрын

not without an adapter, they do have adapter kits though if you wanna

easiest way to run the DRL is to splice into the middle wire of the turn signal/parking light.

Just curious I ordered the same lights for my 14 JK and the tabs of the light won’t fit in my housing correctly. Did you come across this problem or is there anything you would recommend?-Thanks

@TacticalJK

3 жыл бұрын

If they don’t fit but are close, you may be able to mount the retainer ring and secure them in place anyway! I don’t think the fit has to be 100% as long as the ring goes on, but idk for sure.