I’ve had these lights for over 2 years on my JT’s. They are the best aftermarket “cheap” headlights on the market. I ran trucklite “rigid” light on my JK and they were underwhelming for the price. I don’t hesitate to recommend these lights to others.

When I was your age a car like that would be something that I only could dream of.

I just installed mine on my wife's 2016 Jeep Rubicon... It had the halogen headlights.. WOW what a difference!!! She said it was like night and day...

@dougcoleburn1579

Жыл бұрын

any modifications needed? I have seen a few comments on other pages of lights being too big. Thanks

@1910FruitgumCompany

Жыл бұрын

@@dougcoleburn1579 it was pretty straight forward.. plug and play.. the DRL's had to be cut into the center line of the tirn signal as the install shows...

Looks great. I put those in my brother in laws gladiator

Like the look. What product did you select for the fog lights?

I’ve spliced it, wiring looks good but no change. I still have headlights and main beam. Anyone have any ideas?

Do I need to buy new backets to install these headlights?

In video, showing your installation, you connected to the center wire of the harness for the DRL. But, I didn’t see you connect the turn signal light wire. My issue is my DRL does not operate unless you turn on the headlights, or if the parking brake is set. If the parking lights are on, or the HL switch is off, the high beams are on. If I turn the HL switch all the way on, the low beams come on. And the high beams function normally when activated. The two additional wire connections (from the headlight harness) are wired as follows: the DRL wire for both lights is connected to a fuse tap in an accessory plug (M14) on the fuse block. The turn signal for the halo is wired to the turn signal harness. I want the halos to operate separately during the day, without the high beams being on all the time. Any suggestions?

@dougcoleburn1579

Жыл бұрын

most likely need to wire to fuse box with a key on circuit.

What h13 to H4 adapter are u using

Is your driver side low beam on the inside or the outside

How did you get the LED ring to stay on by itself? I have a 2015 Jeep. JK it'll only stay on when it's in park. Soon as I put it into gear the headlights come on during the day with the LED ring

@missioncustom5415

Жыл бұрын

That is strange, I did not run into that problem when installing these but I tapped into the turn signal wiring so when I turn the headlight switch by the steering wheel one click (between off and headlights) just the ring lights up.

What year model is this jeep? I'm looking at getting a set, but I've heard that people have some trouble fitting them in the buckets in 2015 JK's, and have to make some minor adjustments with a dremel or something.

@jramos20

7 ай бұрын

Same here. Currently installing and nobody seems to reply on all the videos I've seen lol

@luke2956

7 ай бұрын

@@jramos20 hey man, just to let you know I installed them in my 2015 and all is fine. No modification was necessary. The retaining ring clamps them in place perfectly fine.

Why does mine have a yellow and red cable for the halo ? Yours only have a yellow cable

@missioncustom5415

Жыл бұрын

The red cable might be there so you can use the halo as a turn signal, mine didn't have that feature.

@pogi103

Жыл бұрын

@@missioncustom5415 is it possible to have that feature if I just put another cable? or no?

does this fit on JL 2020?

@missioncustom5415

Жыл бұрын

Yes! The JL uses 9-inch headlights, so there is a bracket you have to purchase if you want to install these on a JL: www.amazon.com/Inch-Headlight-Black-Mounting-Bracket/dp/B08CJZ4R5B

@overland_3j

Жыл бұрын

@@missioncustom5415 thanks man, I got it already just trying to figure out how to install the DRL