Keep it up! This is what it’s all about.

Great vidio guys! Every crash is an opportunity to try again. Don't give up!

That was funny

i think it needs a bit more nose weight, the way you are fighting to keep it straight.

so much is WRONG with this model.!!! the model is heavy for its size and it has a less-stable dom. distribution of mass. in the future, you need to understand dom. dom Determines the locations of the cg and the center of mass (c-m). (see my tutorials, if interested.) the Optimal locations of those are Known, and mass SHOULD be Distributed Accordingly. specifically, cg is supposed to be located at thirty percent of chord; and center of mass (c-m) is supposed to be located on the thrust line, at a point that vertically aligns with twenty-five percent of chord. the main landing gear should be located such that, when the model is level the main lg is located directly below the wing leading edge. this is NOT an opinion. the mass of rudder/elevator servos Should be located Near the cg; not aft-of it.!!! tapering of the tail boom is FUNCTIONAL; not cosmetic.! doing so optimizes/tunes the dom of the tail boom. the tail/stabs of an aircraft Should be made as Light as is practical. in addition to the dom of the tail boom being optimized, the stabs should NOT be any larger than is necessary. under normal conditions, the span of a horiz-stab should be equal to thirty percent of the wingspan. 055 adding plastic bits to the wing trailing edge, undoubtedly, made the wing heavier. doing so also EFFED-up the dom of the main wing.! ELIMINATE the wingtip things.!!! eliminate flaps and the mass of two servos. while also increasing the aileron span to equal the (existing) flap span. the wing-located control horns appear to be Not correctly configured. as in, TOTALLY wrong.! the mass of wing-located servos should be located forward-of thirty percent of chord and as far Inboard as is practical. location of the mass of servos and landing gear distant from the model's center line adversely affects the dom and roll axis stability. d

@justicesickles

Ай бұрын

Dude chill out. They are having fun. If your going to give constructive criticism you could be a bit nicer about it. Building and flying Rc planes is a fun hobby not a government project. not everything has to be perfect. Let them experiment and learn.

@ninjamoshen4706

20 күн бұрын

FR