You need to put a washer! A 1” washer between the bolt stop and the buffer tube. What happens is there is only a small rubber donut that is behind the bolt stop and over time that donut wears and goes into the buffer tube and the bolt stop also goes into the tube. The charging handle gets hit on the frame from going too far back, eventually bending it. Someone posted about it recently. I just bought one but haven’t received it, this should be the first mod. 1” washer.

@bitcoin457

4 ай бұрын

link please

@celicablues

3 ай бұрын

Quarter should work too, got two in one of my AR buffer tubes.

What a great idea and I love your videos keep up the good work and I definitely will continue to keep watching

Picked up the “featherweight” version of this rifle for my teenager, all polymer everything and it’s pretty nice for $150. he can get used to a tactical rifle without killing my wallet with 556 ammo

@user-cv6sj2vr6l

11 ай бұрын

I aswell have the featherweight. The receiver is coated in almost like a textured powder coat. It feels like a combo of polymer and aluminum. It is metal though, isn't it?

@kl6911

11 ай бұрын

@@user-cv6sj2vr6lpolymer

@ianprice3837

4 ай бұрын

You may not actually have the feather, depending on where you purchased from and some other factors. There has been a number of people who picked up a "feather " from dealers like PSA or Sportsmans and ended up with the metal receiver version with the carbine style fore-grip that is on the feather. You can tell the difference most easily (besides the polymer vs aluminum receivers) by the top rail on the receiver, if it extends out past the​ start of the handguard as it does on the one shown in the video, than it is not a feather, even if it has the carbine style foregrip. The feather is polymer frame and the top rail ends at the edge of the receiver as apposed to extending our over top of the carbine style foregrip. From what I have seen the feather model, because of the lack of extended top rail and apperently a difference in the design of the mounting point for the handguard (according to Reddit users, I haven't seen both models in person for comparison) is compatible with other standard AR style handguards, bear in mind however that I cant vouch for the validity if the claims that any model of TM22 is compatible with standard AR handgaurds.@@user-cv6sj2vr6l

@jstud999

2 ай бұрын

@@user-cv6sj2vr6lit’s plastic. It’s made from a cheaper polymer.

@TandCGarages

5 күн бұрын

It's $150 in the US? $600 in Canada :(

Great video thank you so much. I have a different model , but still a awesome rifle for practice.

My charging handle screw bent on me as well, and ended up breaking. Fortunately I was able to get the remnant out, and I went to Lowes and picked up a box of m4x25 screws and they are a perfect fit for replacement. Best $3 dollar investment I have made. Replace yours before it breaks and save yourself some grief.

@bbbbojangles2737

5 ай бұрын

You need to put a washer! A 1” washer between the bolt stop and the buffer tube. What happens is there is only a small rubber donut that is behind the bolt stop and over time that donut wears and goes into the buffer tube and the bolt stop also goes into the tube. The charging handle gets hit on the frame from going too far back, eventually bending it. Someone posted about it recently. I just bought one but haven’t received it, this should be the first mod. 1” washer.

@robertsmock5044

Ай бұрын

Make sure to put a washer behind your bolt stop

@robertsmock5044

Ай бұрын

I've had to do a ton of drug to mine

You didn't screw your stock down enough allowing the bolt stop to drive further into weapon. That's why your charging lever went to far back and got bent. I made the same mistake.

very cool., getting to know your weapon and breakdown & cleaning of it is important! Charging handle is probably aluminum due to the low caliber., will bend/ break if it's overstressed.

Great vid. But I think I'll get a Tippmann M4 22. Much easier to field stripe and reassemble.

Excellent detail on the takedown section. I'm going to link to this video for my own review of this rifle coming up in a few weeks. For your accuracy section you should explain to the viewers that the right set of targets were for checking your zero and the left was for groups? Also were you shooting off hand, rested on a bag, or on a rifle rest?

@highcaliberhaymaker

Ай бұрын

I appreciate that

They have a magazine rebate on their website where you get a free 25 round magazine with the purchase of gun

Need to know how to attach a sling to the adjustable it has a hole that goes through all the way

@highcaliberhaymaker

6 ай бұрын

Either a clip or an expand prong

Where you get the stock from need a longer one!!!

I beleive you have the gen 1 series im not sure if rock island has the gen 2 out yet weve got the gen 2 up in canada

@highcaliberhaymaker

Жыл бұрын

Gen 1 has the bottom set screw for the handguard. Gen 2 does not 👍🏻

Can you make a video on how you changed out the stock butt stock to a folding one please

@highcaliberhaymaker

Ай бұрын

I will try to do that in the near future

Great informative video! Thank you. Did you have to do any specific custom adjustments to be able to fit that magpul stock + folding attachment onto it? I’m trying to do the exact same set up on mine as you have on yours and discovered the stock is a commercial diameter instead of milspec so thinking I may have to do some extra work to make it happen than i had originally anticipated…

@highcaliberhaymaker

10 күн бұрын

Not at all

@landocups

9 күн бұрын

@@highcaliberhaymaker wow really? Do you think you’d be able to make a video on how you did it? No worries if not, just thought I’d ask. either way take care! 👍🏽

How did you install that stock on there? I keep seeing you need a comm buffer tube but have read comments that people used mil spec as well. Would be great to upgrade stock on mine

@highcaliberhaymaker

10 ай бұрын

Use a mil spec tube and use the existing castle nut to secure it to the adapter

Can you tell me what stock brand and model number is and what buffer tube is that also? Does the tube use a spring kit or are there holes in the tube for the stock adjustment? Thanks much for the video 👍

@highcaliberhaymaker

4 ай бұрын

Stock is mil spec buffer tube with adjustment holes. No spring as the rifle has internal buffer spring.

Got one of these with the 20" barrel. Couldn't get the Barrel nut loose and used a bore snake. Got mine at PSA $260 out the door with shipping,Tax,FFL and a free 25 rd mag

@highcaliberhaymaker

10 ай бұрын

That's a great deal

@landongara837

9 ай бұрын

How do you like it ?

I grew up with a 22 rifle on our farm. Just an idea, maybe you can honor your dad who just retired from the military. He spent a lot of years protecting our great country.

@anthonyharper8161

9 ай бұрын

Tell him I said thank you for his service.

Sir,gud day what is the brand your folding butt & its that a red dot sigth or scoop.tnx

How did you manage to put the foldable stock? What did you do with that screw at the bottom of the castlenut plate?

@highcaliberhaymaker

3 ай бұрын

Removed and used a standard AR15 backing plate. The screw only holds on the original.

Is there anywhere that shows how to take the trigger apart. My trigger socket spring fell out and I believe that is the problem with mine not firing but only problem I have is not knowing how to take the trigger out

@highcaliberhaymaker

Ай бұрын

Similar to AR takedown

great vid . suggest improving lighting during takedown. internals are in shadow . 😊😊👍👍

@highcaliberhaymaker

4 ай бұрын

Appreciate the input. Have moved to a whole new set up last month. Shouldn't be an issue moving forward.

Ive been told the tm22 takes the commercial buffer tube and not milspec so im a bit confused ??

@highcaliberhaymaker

3 ай бұрын

It was a spare straight of a mil spec AR 15. Fits with no issue

Definite put links to mods in your videos. Couldnt find the folding stock and I found the model number for the optic in the comments, but its 3-4 times the cost you listed for. Obviously prices change over time, but I don't think they have gone that high for those parts. Would love to know the folding stock part number. Nice video btw.

@highcaliberhaymaker

Ай бұрын

Please visit more recent videos.

Dumb question but what kind of foregrip do I have to get with this I don’t know the difference between them

@highcaliberhaymaker

2 ай бұрын

Magpul angled

Can you please share the model Number of the optic?

@highcaliberhaymaker

5 ай бұрын

RITON OPTICS X3 TACTIX ARD 1X25MM RED DOT SIGHT

.22 LR's have to be cleaned often. Wouldn't the process required to break this down for cleaning throw off your zero every time?

@highcaliberhaymaker

7 ай бұрын

Not necessarily, the machine and alignment is very good on the receiver.

The charging handle has 2 flat spots that fit into the bolt, you need to keep the screw tight . Why dont you show the barrel removal.? Simple unscrew the barrel nut with wrench provived and slid out. I have one and it runs GREAT. Very accurate.The buffer tube is comercial not Military if you are buying a different stock FYI

Just bought one, i hear some people use 5/8x24 muzzle brake or 1/2x28 which one does it use?

@highcaliberhaymaker

5 ай бұрын

Depends on if they have the older or newer model. The only way to tell is to use a test nut because the manual may not specify.

@pc287

5 ай бұрын

Its a newer model just purchased it.

@rudyv6100

4 ай бұрын

When it first came out they only made enough to get out to some shops and influencers…those first ones have 5/16 24….the newer models all have 1/2 28…when this first became an issue RI would replace the barrel for you so you could use your 1/2 28 muzzle device…I don’t know nor am I sure that they still do this but that was the reason for the thread difference

@pc287

4 ай бұрын

@@rudyv6100 thanks for the info, mine is 1/2 28, wish i could find a longer handguard, but i think they dont have any yet.

Bought mine on Buds for $190.00 recently...stupid cheap

What was the name and model of the optic please ?

@highcaliberhaymaker

5 ай бұрын

RITON OPTICS X3 TACTIX ARD 1X25MM RED DOT SIGHT

ST George, like near Walterboro, SC?

@highcaliberhaymaker

2 ай бұрын

Yes

@travismcclendon6712

2 ай бұрын

@@highcaliberhaymaker awesome, I live in the Walterboro area.

Where do u bought the stock from ??

@highcaliberhaymaker

8 ай бұрын

Palmetto State Armory

What mags fit in it?

@highcaliberhaymaker

5 ай бұрын

Only specific model mags

Where can you buy it

@highcaliberhaymaker

9 ай бұрын

Palmetto State Armory, link in description

Looks kinda like a 10/22 mag.

Has anyone else’s stopped firing “semi automatic”. Got it for my son, it’s only firing single shot and he has to discharge every round

@highcaliberhaymaker

3 ай бұрын

Clean the spring and make sure the bolt is aligned straight.

@MarkChaney

Ай бұрын

Also make sure its high velocity ammo

So sorry I bought this garbage. Off to the pawn shop with it

@highcaliberhaymaker

8 ай бұрын

Did you leave it stock? It's not a super quality, it's just a fun gun to shoot.

@Optimization_Coach

8 ай бұрын

Yep. Ran a few mags with different ammo and it was ok until all the jammomatic issues started. Used a few ammo to evaluate, but in the end, get what you pay for. The breakdown of this is rediculous. Live and learn. Tippmann is the way to go ... pricey, but MUCH MUCH BETTER@@highcaliberhaymaker

Probably buy an aftermarket charging handle .