New Reloading Tools and Components for 2023!
New Reloading toys have been announced for 2023. In this video we go over all the new products we hope to see in 2023!
Reloading Basics - • Getting Started Reload...
Support the Channel on Patreon: / boltactionreloading
Subscribe here for more informative videos: goo.gl/pMHmvu
#midwayusa
DISCLAIMER:
Videos on this channel are for informative, and entertainment purposes only. Using any of the information is at the risk of the individual using the information. We (including KZread) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. By viewing or flagging this video you are acknowledging the above.
Пікірлер: 85
Good video and congrats on the sponsorship. I can tell you what I don't want to see: $600 dies, $60 funnels and so on. I have two custom rifles (from SAC) and they shoot lights out - .20in groups at 200 yards. But my equipment, for example, is a 30 year old Rock Chucker press, 20 year old plastic RCBS funnels, etc. FYI - my precision dies are LE Wilson. Chasing equipment because its made from billet or has fancy coatings means little, and just increases cost for no quantitative benefit. Its like watching new calibers being invented and youtuber guys touting we need all this or we will die, or at the very least, miss shaving .003 off our groups. Sorry for the rant - keep it simple and affordable.
As to powders, I'm interested in Winchester Match and .223/5.56.
@timmartin6410
Жыл бұрын
Specifically with the Hornady 62 grain FMJ
Congratulations on the Midway sponsorship! I appreciate both them and your channel
223 and staball match!
6.5 PRC and Winchester HD powder.
With help from this channel Ive gotten my 1st reloaded rounds down range with fantastic results. IMR 4064 43.2gr allowed for a 5 shot group that seriously is one ragged hole. .288 5 shot group was so satisfying, ...just being that consistent on the trigger was a great feeling. I moved from .010 off the lands to .015 off the lands and everything came together. I owe a lot of my success/luck to this channel as I was a complete newbie just a couple months ago. Glad you got a sponsor and more is coming down the line, this channel is important to people like me just starting out.
@TheSaintsAdvantage
Жыл бұрын
What barrel length and bullet weight?
@rickm4295
Жыл бұрын
@@TheSaintsAdvantage 20" barrel /168gr SMK
Great video, thanks for keeping everyone up to speed on what's new and happening!
A sponsorship with no strings, is a nice bonus.
Im interested in the best Staball powder for 6mm ARC.
An excellent channel this is!!👍👍
Congratulations on the sponsorship!!! That's awesome. I would start testing the testing process. Everyone is up in arms with Bryan and the hornady guys saying that you need 30 rounds to get a real understanding. It would be fun to see you do the same test. Don't change a thing and shoot 30 5 round groups and let us see what you got.
I just got a 6 GT and started loading some of your loads for it.. Would like to see more on this 6GT, still cold and wet here in Ga... can't get out yet , got one day to sit it in and WoW shot 3 shots and got a micky moust (smiles) Now I know it can shot going to try first a 6 load powder shots, with Varget and Berger 105's. starting at 32.4 ... Nice channel. Keep up the real thing loading and shooting !!!
Love Midway USA!
Keep on keeping on
Winchester HD powder in a 338 Lapua Magnum.
For Winchester Staball HD Powder, I am interested in 300 PRC load development. I am a big fan of Hornady's PRC lineup. I own a 300 PRC rifle now and plan to purchase rifles in 6.5 PR and 7 PRC.
I'd love to see the Staball match in some 223, 6mm ARC, or 6.5 Grendel... my understanding is that it's supposed to be a temp stable cfe223 or at least I read something like that on the internet so who knows if that's true but if it is that would be really sweet because that's 3 of my favorite cartridges...
@ForceRecon112
Жыл бұрын
closer to varget from what ive seen
F1 press review and staball match and heavy 223 bullets. Or other powders tested with heavy 223 bullets. Thank you
This is one of my favorite channels .... Glad to hear you have Midway as a sponsor ... Stuff I am interested in now is OBT velocity nodes and seating depth nodes and which one should be determined first. then there is always getting my scope on straight and getting rid of parallax errors and all the other little things that make a big difference down range... I'm happy when my groups are inside one MOA and ecstatic when their all in the same hole.
I would love to see loads in 6.5prc with the new HG powder. I am very interested in this powder! Congrats on sponsorship. Darren
I'm very excited about the 7 PRC, it looks like a 7 Rem mag without the belt. Pretty much perfect.
your the best on the channel thanks for all of your help BTW my first load shot 13 rds 6.5 creedmoor .69 " and a SD of 11 not bad 1st time out
Now you’ve made the big time with a sponsor. Looking forward to more great content.
Let's see the sta-ball match in a 223 Wylde using the 77 grain lead cast Arsenal bullet!
Thanks 😁
Staball match ! 223, 22-250 or 30.06 would be cool. Thanks for the update 👍
I was able to get my hands on a budget 7 PRC, a Mossberg Patriot, late last year. One range trip has shown it to be an accurate rifle with the 175 grain ELX loads going under an inch across 5 - 3 shot groups and 1 - 5 shot group. I let some buddies shoot and they were around an inch as well for 5 shots. Total rounds at the range was 40. I have since reloaded some 162 grain copper bullets in those cases, but have not made it back to the range. I also took a deer with the cartridge New Year's week. It was abusive and got the job done, even with a bad shot. Damage was exactly what you would expect with any big 7 caliber. I will probably continue deer hunting mostly with my Grendel bolt gun; it's just so light...lol. I will take my .308 A bolt on occasion for nostalgia, as it was my first deer rifle at 10 years old. I have since put the Mossberg in a Chassis and will be putting better glass on it. Then we'll settle on a match load for it and head to the 1400 yard range to see what the budget plinker can do.
A great distillation of interesting things, succulent and accurate.
Since I’m just getting started in reloading I would be interested in the Frankford F-1 press in a kit package. So if you reviewed it that would be great!
The Hornady scale is interesting. I was lucky enough to find a jeweler’s electronic scale that’s very consistent and reads in .02 grain increments for around $50. It’s not automatic though.
@victorhartman1904
Жыл бұрын
It is interesting, but one should remember that 0.01 gn readability is not the same as 0.01 gn repeatability. The repeatability of the load cell-based scales is usually limited by 3-5 mg and I am quite quite skeptical that this scale would be better than that.
HD in 7mm rem mag with 180 great bergers. Match in 6mm arc. Thank you
I am looking at the 6.5 PRC the Hornady scale looks interesting
Really interested in getting a 7 PRC. Not in a rush though.
Thanks for sharing, I'd like a review of the new Winchester powders........
Good for the market, industry, shooting sports & hunting community. As a 7mm proponent for over 3 decades I can see a place for the 7PRC. I won't walk away from my 7 RemMag but will encourage folk to consider the new cartridge. That being said I would like to see the new Win Staball powders in 308 & the 7 mag or similar cartridge. Great vid. Thanks a bundle
Please give critical reviews rather than promotional reviews. Don't become another "Ultimate Reloader" You have been good so far. Keep up the good work.
@BoltActionReloading
Жыл бұрын
That is why I agreed to take the sponsorship. They get no say in what is covered or how it is covered. This will allow me to cover things that I just simply couldn't previously justify both on the high end and the more budget side of things. I hope you find that there is more consistent content, the quality is higher, and if there is additional information that you want to see covered to mention it.
Would love you to see a load development series on the 6 GT
@ForceRecon112
Жыл бұрын
same. starting a build for that this year
I would like to see some content on 7mm prc & 7mm rem. Mag
Yes. Interested in the new Frankford Arsenal F-1 press.
If you have the opportunity I would6 like to see the new win powder for something in the 264-Win Mag are close to it as possible
I'm interested in automatic powder dispensers
It’s the Talking Hand. We only care about primers and powder.
I would like to see you test Winchester StaBall HD in 300 PRC with 190-250 gr bullets. Thanks .
7mm PRC and staball HD. Looking forward to this combo for an upcoming ELR rifle
Any 7mm is a good thing. However I'll stick with my 280ai and enjoy the new bullets that are sure to come.
Staball match is marketed as like Varget so I would like to see side buy side with Varget in 308. Staball HD is going to be a 338 Lapua cartridge, maybe a hunting type load? Ball makes more sense to me for that
Midwest is a great site with a huge inventory my only problem with them is for some reason the website locks up when I get on it. I don't have a problem with any other website Just Midway. I would like for you to do some 6mm ARC videos. And possibly find out when Hornady will have 6mm ARC brass in stock and if any of the other brass manufacturers are going to begin producing 6mm ARC. Also would like to see some reloading of the Hammer line of bullets and a performance test. Congratulations on your new sponsorship and Thanks for all of the great detail that you have produced!
I'm curious about that Frankfort press, I don't need one but it looks interesting.
@CrashRacknShoot
Жыл бұрын
Looking to get into this whole world. That's a good looking little press and may be perfect to dip my feet in outside the usual. Curious how it stacks up.
I'd like to see Sta-Ball HD tested in .300 Win Mag
How about 224 Valkyrie in a gas gun for Staball Match with Berger 85.5 hybrids or SMK 90's. A lot of us who started with this cartridge three or four years ago still struggle with consistency.
I'm way overthinking this, but 7-08 vs 6.5 Creed for a NRL Hunter set up.
@trg3761
Жыл бұрын
7mm 08 for the win
300 PRC loaded with the Staball HD would be awesome.
Are the new powders for 9mm loading?
Winchester Match in 22 Nosler with 50 - 60 grain bullets
Little bit of new 6.5’s and maybe some old 308/270 for Win powders
7mm PRC StaBall HD
270 Winchester, wanna see a 145 breaching 3000 sub half min
Staball HD in 338 Lapua PLEASE!!!!
.243 on the powder
I wonder if the new Co-AX will work with micrometers on top of dies?
@ForceRecon112
Жыл бұрын
it should. So let's say you're using a non 338 lapua and above 1 1/4 die like the ones from Area 419 and such, this press should give plenty of clearance. It's intended for up to 50 BMG
No video's on Pressure Trace 2 ??????????
Win HD in the 7mag 300win mag and 300 wby mag
I am interested in smokeless powders for 20th Century military surplus rifle reloading for M1 Carbine, 6.5x55, 7.62 Mosin, 7.65 Mauser, 8mm Mauser, 45-70 and .303 British that does not cost $50/lb. Even 8 oz. - 12 oz containers would be appreciated.
NOT WORD ONE ABOUT THE LACK OF PRIMERS !! WHY BUY ANY RELOADING STUFF WHEN YA CAN'T RELOAD A CARTRIDGE CAUSE PRIMERS AIN'T AROUND ??
Review how bad midway packing order.
6mm prc
I'd like to see the HD powder in a 7 rem mag and 300 win mag
I wonder how many of us there are to rationalize all of this new stuff year after year.
Sta-ball in 300 win mag..
It is amazing how average the scales are in this industry.
Midwayusa do not working with me, always "We're sorry, we were unable to load data for this product. Please try refreshing the page. If this issue persists, please try again later."
I see no real advantage of the PRC 7mm over the 7RM. My 7RM shoots 175s extremely well.
im new to this hobby and im sure that the information given here is great but i gotta admit that i have a hard time watching a channel where the host wont show his face. just saying
7mm PRC is nothing new, really just a copy of the 7mm Blaser Mag... look it up.
New reloading tools and equipment!? Im simply trying to find a primer! Then ill worry about expanding my tool set!