New! Release Contours - Kiss Cut and Die Cut with Siser Juliet or Romeo Cutting Machines
New feature in the Leonardo Design Studio software - Release Cut Contours. Set up kiss cut vs die cut around your images easily.
Newly released v1.1.7 is still in Beta when this is recorded.
More videos on the @SwiftCreekCustoms KZread channel here - / @swiftcreekcustoms
Want to help support this channel and future tutorials?
Buy us a coffee - ko-fi.com/swiftcreekcustoms
Affiliate links may be present below and as an Amazon Associate I earn from qualifying purchases.
Summer Watercolor Sticker Bundle - bit.ly/41PuyYo affil
Koala Sticker Paper - amzn.to/4aSCb4t affil
Siser Juliet and Romeo cutting machines and Siser EasyCrease & Etch tools can be found here:
Vinyl Spectrum - bit.ly/3HwFlii
Heat Press Nation - shrsl.com/4hhbu
Find us online at:
Creating with Siser - Juliet & Romeo FB Group - / creatingwithsiserjulie...
Swift Creek Customs FB Page - / swiftcreekcustoms
Swift Creek Customs FB Group - / swiftcreekcustoms
Swift Creek Customs Instagram - / swiftcreekcustoms
#siser #siserjuliet #siserromeo #vinylcutter #plotter #sticker #kisscut #stickers #designbundles
Affiliate links may be present and as an Amazon Associate I earn from qualifying purchases. What that means is that I may receive compensation if you purchase through the links I have provided. The price you pay for the product or service is not higher but I may get compensated for sharing.
Пікірлер: 78
Great video.. I was on the edge about getting the siser romeo and this video I believe made up my mind. Thank you very much! Have a wonderful week
@SwiftCreekCustoms
Ай бұрын
Thank you! You are welcome!
Thank you! I have been waiting patiently for an "easy peel" way to do stickers with Juliet. Can't wait to try this. Seems much better than the hack I had to do with my Cricut.
@SwiftCreekCustoms
Жыл бұрын
You are welcome!
Thank you!! Editing contours is one of the features from Silhouette that I'm so dependent on, so I'm glad to see it in the new update.
@SwiftCreekCustoms
Жыл бұрын
You are welcome!
Thank you, EllyMae!
@SwiftCreekCustoms
Жыл бұрын
You are welcome!
Thank you so much EllyMae! Great tutorial to reference :)
@SwiftCreekCustoms
Жыл бұрын
You are welcome! So glad it helps!
I downloaded Leonardo software today and I’m ordering Juliet on Friday. I can’t wait. Thank you so much for this tutorial I can’t wait to try stickers for my planner.
@SwiftCreekCustoms
11 ай бұрын
You are welcome!
Very helpful!! Thank you so much!
@SwiftCreekCustoms
Жыл бұрын
You are welcome!
Thanks for explaining this! Exactly what I was looking for.
@SwiftCreekCustoms
6 ай бұрын
You are welcome!
Thank You! The trouble shooting video would be great :)
Thank you! Saw this before I had my Juliet and forgot all about it. And duh, I had mine set on Use Cutter Settings so didn't see the tool options.
@SwiftCreekCustoms
4 ай бұрын
You are welcome!
this is great, can we request for the next update to have the full cut and cut tool to be different colours? That will make it so much easier to distinguish the different cuts :)
@SwiftCreekCustoms
Жыл бұрын
It's coming this month. I've been testing it for a few weeks now, but that was one I requested very quickly 🤣
I’m seeing this video on Feb 19 2024 v my Leonardo version is 1.1.18. This version is different. Do you have an updated video? Your presentation is clear and watchable. Thank you. Nick
@SwiftCreekCustoms
5 ай бұрын
It should not be different. Can you tell me how it's different?
How would you go about making sticker sheets where the sheet (background" has a design (like color or a header) and rounded edges and have the sheet die cut and the stickers kiss cut? I've seen a few tutorials but they are for the cricut and using photoshop
I tried the suggestions in video but my images with the white don't keep the white in between the design, it makes it transparent. How did you make it stay white like between the shades in the summer image
Thanks! Awesome to be able to edit the Path. What I'm wondering about, is there a way to realign, to move the Path back to the origin position after I moved it, besides Ctrl+Z directly after the move?
@SwiftCreekCustoms
Ай бұрын
No. Control Z is the only undo and that will only work in the software.
@EVO_Engineering
Ай бұрын
@@SwiftCreekCustoms So Object Snaps, in this case Geometric Center would do (eg. like in AutoCAD) is not available. Thanks for your reply.
@SwiftCreekCustoms
Ай бұрын
@EVO_Engineering you can use the align tools in the bottom toolbar bar or under the menus to align designs to each other or the edges of the mat. There is also a position that you can tell it exactly where to go in the bottom of the Properties panel. I show that in this video tour I'll link below.
@SwiftCreekCustoms
Ай бұрын
@@EVO_Engineering kzread.info/dash/bejne/pYF4xNqpls--nZc.htmlsi=kYipMn2h7kyqbmdq
great video - do you have an affiliate link for the sticker paper you used? Is the printer inkjet or laser? I have some sticker paper but it smears when printed with an inkjet
@SwiftCreekCustoms
Ай бұрын
This is what I used in this video.... amzn.to/4aSCb4t affil I have a Canon TS9521C inkjet printer
sorry maybe dumb question... but are u able to use a card stock paper on the siser to just cut the contour? I want to print a sticker but have just a cutting contour to glue behind the actually sticker no print just cut... Hope it makes sense
@SwiftCreekCustoms
3 күн бұрын
@Buendia323 yes. Here is how I would do it. Create an offset of the sticker that you would want cut. Copy and paste the offset to a new design mat. Save both files and then copy and paste the offset to be cut as many times as you want on the new file.
@Buendia323
3 күн бұрын
@@SwiftCreekCustoms can this be done even if it doesn’t have any margins ? I just want the card stocks to be cut the same shape as the stickers to just be able to glue the stickers on the card stock .. so I’m not actually printing on the card stocks I just want to cut
@SwiftCreekCustoms
3 күн бұрын
@Buendia323 yes. You just need to create the cut line you want.
@Buendia323
2 күн бұрын
@@SwiftCreekCustoms do you have video showing how can I create a cut line ? So sorry 😩😩
Hey SCC do you have a video on print & cut for 8.5 x 14 inch paper?
@SwiftCreekCustoms
6 ай бұрын
All the same steps, just change your print page size kzread.info/dash/bejne/e5t2j6eSp5CuXc4.htmlsi=zTdSiG55gExjdNUm
Hi! Your videos are so helpful as I'm learning my Juliet. Do you know if this method is possible for vinyl cuts? The 'Release cut contours' menu option is greyed out when I try the steps in your video. I'm trying to create a vinyl decal with an easy peel border.
@SwiftCreekCustoms
2 ай бұрын
Release cut contours most likely won't be available on a regular cut.... but you could create an offset - Build Contours in bottom toolbar.
@Karlos.23
2 ай бұрын
On design page check "help" and "sofware updates" you might have to download the newest version.. thats what happened to me when "release cut contours" was greyed out..
@jacentaaa
2 ай бұрын
@@SwiftCreekCustoms thank you, I’ll give that a try!
@jacentaaa
2 ай бұрын
@@Karlos.23 Ah, good to know! Thanks! I’ll look into this tomorrow. 😁
Hey what printer do you use for your pictures beofre Siser cuts them? Grace
@djspicky1
4 ай бұрын
Canon PIXMA TS9521C is the printer used in this video
How do you remove the cut pieces in the contour that you don’t want?
@SwiftCreekCustoms
3 ай бұрын
Right click on cut line - choose break paths, click off to deselect and select what you don't want and press delete. More on Break Paths - here - kzread.info/dash/bejne/rJaTt6Z_opvWYJM.htmlsi=7uaB6r1FVJSwJO6m
Bonjour, je comprends vos vidéos grâce au traducteur et vous remercie de le mettre en place, je me permets une question car SISER n’est pas encore beaucoup connu en Europe donc pas beaucoup de tuto mais Juliet me plaît et j’aimerais l’acheter, toutefois je suis scrappeuse et je souhaite l utiliser pour faire le détourage des tampons que j’achète, j’ai essayer garce au Leonardo d’essai et la numérisation fonctionne mais je ne peu pas imprimer pour vérifier que les dimensions correspondent au tamponnage, auriez vous la gentillesse de me dire si vous avez déja fait un essai si si cela fonctionne correctement afin de me rassurer et me permettre de l’acheter, d’avance merci beaucoup
@SwiftCreekCustoms
Жыл бұрын
The method you are referencing is not currently available with the Siser machines. If you are printing something direct from your printer, then you can print and cut.... but a stamped image, it would have no way to know where it is exactly on your cutting mat. Sorry in the delay, I had to translate on my computer as my phone doesn't do it easily from KZread.
@sandraaubry8750
Жыл бұрын
Merci pour votre réponse, bonne journée
how can we get them to print and cut those stickers inside of a bigger sticker in the background? kiss cut and die cut after
@SwiftCreekCustoms
Жыл бұрын
I don't understand. I would need a clearer example of what you are trying to do. The video shows setting up 2 different cut lines for kiss cut vs die cut. You should be able to follow the process for anything you can make a cut contour for.
@dandee28
Жыл бұрын
@@SwiftCreekCustoms just like this, I tried to do with siser but it won't die cut the kiss cut images on top of the back ground images kzread.info/dash/bejne/mopoqKiDorWqmbw.html
@dandee28
Жыл бұрын
@@SwiftCreekCustoms any idea? my siser is useless until I can figure out how to make kiss cut sticker sheets like the cameo 4 can
@SwiftCreekCustoms
Жыл бұрын
@@dandee28 like I commented above, I need more information. I don't understand what you are trying to do. From the little information provided, you would simply create a cut line where you need it and then tell the software what you want it to do..... Kiss cut or die cut.
@dandee28
Жыл бұрын
@@SwiftCreekCustoms I added the video link. Basically using an image as the background template, and adding images over top for a kiss cut, and die cut around the background image. Siser can't seem to do that? kzread.info/dash/bejne/mopoqKiDorWqmbw.html
when editing contour nodes you said you could delete some of them if you wanted to, when I try to delete a node it deletes the whole thing I can't delete individual nodes.
@SwiftCreekCustoms
Жыл бұрын
Right click on the node and choose Delete.
@tamayles
Жыл бұрын
@@SwiftCreekCustoms I don't have delete as an option when I right click 🤔
@SwiftCreekCustoms
Жыл бұрын
@Tamara Aylesbury not sure where my other comment went by double click on a node to delete.
@tamayles
Жыл бұрын
@@SwiftCreekCustoms THANK YOU!!! ... Yes that works 😄
@SwiftCreekCustoms
Жыл бұрын
@@tamayles you are welcome!