Hey Warren I'm sure you've seen me around here before but just want to say thanks for the mostly indepth content and the conversations you have with us I think I speak for everyone when I say it's a pleasure to be able to view your content and get your thoughts on topics

@ElvicFarms

Жыл бұрын

Dairy farmer from New York here, me and my father run a small 80 cow operation, we do custom cropping, around 250 acres of corn and beans and 150 of hay ground. Seems like these guys are doing more with less these days and it’s hard to imagine covering the amount of acres others do, it’ll take us damn near November to finish off the beans with this weather and rain and it takes a good month or so to get 150 acres of corn done, we have a batch dryer and if all goes well can do 500-1500 bushel in a day. Key words IF. I try to maintain all our equipment and as long as it’s not getting deep into an engine or hydraulic systems I’ve been able to do all the work in house. Minimal things we sub out. Had to have a shaft re chromed on a cylinder and had someone do that but I rebuilt it and that saved us 600$ and that’s just one hydraulic cylinder on an 18 foot sunflower disk lol

Just woke up here in NY thank you for the time and effort put into your videos Warren!

@leohammermeister2826

Жыл бұрын

Truest two to too

Looks like a good candidate for a ball valve in one of the heater hoses.

What a pain, I feel for you. The little pup ain't so little anymore, still not too big for a hug though I see. Thanks for sharing this one Warren

I replaced one of those heater valves last week. The Velcro had me stumped for a while too! I’m surprised at how little difference there is in the equipment sold in America to what we get in Northern Ireland. Love the videos, keep up the hard work!

That sure looks like a simple well designed setup to me, that engineer earned his paycheque

Keep up the good work I have had this problem before on a Cat it ended up heater lines to cab was hook up backwards

Morning ,your right .nothings worse than buying new parts that are nfg. Great video Warren Thanks for sharing, enjoy the commentary ,safe travels Looking forward to the next one Sask 🇨🇦

I never thought I would ever hear a kind word about NewHolland / Ford ever here. Good to hear they did make some pretty good stuff though. I really hate it when you buy a new part that is broken right out of the box or fails a week down the road.

As a seasoned viewer, I enjoy your commentary. Keep them coming.

Great video Warren Thanks for your insight on certain pieces of equipment and the time you spend video what is wrong and what it takes to fix it. Thanks for sharing your videos stay safe Warren.

Thanks for the ride along sir. Always something to slow the days progress down, stay the course Warren, you’ll win eventually, thanks for the ride along.

Thanx again Warren! love the way you explain things . give all the love to the pooch patrol!

Thanks for sharing warren love the videos

The number of people getting junk parts, even from the dealer noe, used to be mostly aftermarket crap like dorman. I try to get oem parts when they're available, but some stuff, you have no choice but after market garbage. Sucks you done all that work, hope they reimburse some of your labor cost. Thanks as always, G-d bless you, the family, and furry friends.

@johnalexander4356

Жыл бұрын

It's so bad I'd rather get OEM parts from a junk yard than but Chinisiam crap

We all loved the Andrew Camarata reference. Thanks for sharing in the trenches video Warren.

@lastplacetrophy3821

Жыл бұрын

I wondered if that was who he was referring to. I unsubbed from his channel a couple years ago because of the stupid shit he does.

@patricktracy7877

Жыл бұрын

What you guys don't install radios in your truck with a chainsaw?

Thanks for the share Warren. another day to start the day with one of your videos. I know you like to fix things the correct way, if that had been me after all that.... i'd have gotten a inline heater hose valve and slapped her shut. catch on the next one my friend.

Warren i always liked the 89 series magums as well we have an 8910 great tractor

The last few videos I see a Green man turning blue.happy times.always look forward to watching.

Warren, I grew up on a farm in Indiana and enjoy your videos.

Good video!! I like the old tractors. Just finished 1970 Ford 3000 new transmission & rebuilt engine & new paint job & then on the for sale! You can take care of the newer. I work on the old like me I’m 77 great job on video!!!!!

You’re a smart man waiting and letting it set up that way you guarantee no leaks hopefully

Mornin man.. thanks for another video...have a good day 👍👍👊

Modern problems. If the control of the cabin temperature was a manual ball valve, this little pain in the ass problem would not exist. Good video Warren, your hard work and sacrifice is commendable, thanks.

Warren you are killing me with the unfinished John Deere story. I have a 6405 with similar issues and I suspect a dime valve issue. And thats where the story cut off..........

Just got home from work cool video warren 👍

Thank you for the video Warren, certainly well worth waiting for watching, loved comments about Duke having a day off, and the bull in a China shop/ chainsaw hack mechanic who wreak the 6170M engine (he probably was watching and reading this comment right now) you certainly do the same things with Josie as I do with the nut job farm's dog.👍

Fucking classic bro,these are indestructible but we got guys that can fuck them up,absolute gold Warren,you need a one liner video,bet it would make heaps.

hi Warren ,, greetings from sunny Queensland Australia , good vid this one man ,, cheers mate

Thanks for sharing Warren. 👍

Almost indestructible but we have guys over here that can f#$k them up.....greatest line ever! Made me laugh for a few minutes!

Great video, thank you for sharing.

Thank you ! Warren ⚙🌞👍

It’s amazing how a quick fix on the air con turns out to be a major pain in the ass, Great Video thanks for all the time and effort I know you put into making them.

Much enjoyed Warren...

So much fun taking apart so much stuff (and hoping you do not break something) just to get to the part that needs to be fixed and then realise after you put it all back together that you got a lemon MAN that would so piss me off to the infinite power! No wonder you take your dogs with you as you need something to keep from going full blown crazy.

That part would really frost my butt after all that work. You have the patience of Jobe

Warren you have more patience than a Saint Take Care Mate

I’m impressed with your knowledge Warren. I don’t how you keep up with it all.

Any possibility that the circuit driving the valve is impaired? Just seems such a coincidence that two valves would exhibit the same issue. Great video..

good vid warren

Awesome video thanks Warren thanks for your time and consideration top job very informative 🚜🚜🚜🚜🚜

Damn, Warren, looks like you’re still limping from the meniscus tear. After two meniscus surgeries I feel your pain. Hopefully you can get this corrected in the off season?

At what point do you start ordering two of what you need and returning one if the first works to save time with how frequently defective parts are arriving?

Hi Warren, that's a bummer getting faulty parts, are they made in China ?. I liked how that pto assembly came out, makes life alot easier, it looks like days are getting shorter but the jobs list gets longer. Thanks for another interesting video mate, stay safe, best wishe's to you and your's and the doggies Stuart UK.

By now the manufacturers should be getting it all right like this New Holland PTO design. We should have the perfect Tractor by every manufacturer coming off the line by now. They should FORCE every future engineer to work in the field at least 2 years before being allowed to design anything!

Long time no watch, how are you old bastard? Those genesis machines are pretty tough (Ford Genesis, NH 70 series, Fiat G series, Challenger 35/45/55, there is a versatile in there as well), last decent tractor that New Holland put their name on. The only two things that let them down are the instrument cluster and chassis controller.....lost count on the amount of those controllers I have fixed now

Hello Warren. That New Holland most be a good tractor if you are giving it good press. We don't seem to have a lot of luck with New Holland tractors. But that's how it is. It's got some good tires on that NH. I have got some new back tire's for my Massey. 16.9x36. £1.000 pounds sterling.

@maxpuppy96

Жыл бұрын

There all good when they work.

@henrymichaelwilson8107

Жыл бұрын

@@maxpuppy96 yes probably.

Would an air operated vacuum assist in clearing the air out of the cooling system

Warren, Did you verify that the rotary switch that controls the heater module is working? If not it maybe stuck on full heat and not allowing the module to close off the coolant.

Wqrren i always enjoy your videos i mechanic on a coal strjpmine i am in no way in your class of a mechanjc the mine had a rebuild shop ro rebuild engines, trans. etc, i installed the rebuilt units in the equipment otther words a nut and bolt mechanic... keep the vidrcs coming,,, Ky Sam ,,,

So much junk underneath the console, a few minutes with a smoke wreck would take care of most of the problems. But then again, the dang thing wouldn't run. Keep up the great work.

I sorta noticed that you had the temp control on cold?? Maybe?.. There is a knob with the setting Blue fades to Red.. It was on Blue. I dunno. Just trying to help.

They're just might be a drone flying above video recording this sort of thing I've already caught in my neighborhood the dog's going nuts I look up and there's a grown up there and their dogs are looking at it

Is the Heater Actuator getting proper signal to open and close? Another Great Day, being able to watch a Warren Video. Just when you think your busy, you see what he does daily and feel lazy. Thanks for the videos and motivating me to do more.

do you soak the clutch pack before installing it?

"That is one unique looking situation there" I still think there's a competition that goes on between brands to see how much crap they can jam into the front access area.

Does the puppy dog seem to be looking off into the atmosphere while barking

Those heater valves need to be calibrated after replacing them. Could try that before replacing it again.

@westerntruckandtractorrepa1353

Жыл бұрын

I was actually thinking about that, I have to do that on the 7r John Deeres I work on.

Hey warren have you got your youtube play button yet? I think you might have to fill out a form to get it. You should do it you've earned it.

👍👍👍

I think , we as adults have said at one point in our life of driving vehicles of all sorts , most "vehicles" work better when there is only " ONE " operator . Everyone has there own way of driving , fast , hard , slow continuous on , off but when they are all done by one operator , it shows the ugly side....repairs of hard operating . Then call mechanic.

It's summer time waren they don't need any heat work harder they will warm up lol

Eek! Warren's nekkid!

Dem eggs are GIO

👍

We're are your coveralls??????

What did you use as a sealer between the two mounting surfaces? Thank you.

@PrairieMechanic

Жыл бұрын

Anaerobic sealer. Something like loctite - highflex or loctite - 515 Only cures and hardens once air is absent otherwise stays liquid forever. Works very good

Can i ask something personal, how much do you earn a month roughly

Just like on some eyes we’re always had to put a water valve on that line that feeds the heater core just shut down the water tank never find a good part for that application on any tractor

Parts availability is getting really bad now Warren. It's causing havoc in the UK.

Sounds like job security.

HEY WARREN , came across a tractor parts supplier you may not know of or might be interested in . Saw it on another You Tube video. Its called Friday Parts. Inventory for pretty much every make you work on. Regards Steve

Boy, that's frustrating when you go through all that work to replace the part only to find, fresh from a box brand new, and damn, it's no good. And the only way to tell if it's good is to install it. And the parts supplier will not pay for you to remove the bad new part to put in another new part to replace it. But they'll exchange parts no problem...

I hate parts that you have to fit to find out they work !

There are guys over here that can fuck them up 🤣

That hay looks more like straw

Your the king of Grease monkeys 🐒 woz from an Aussie grease monkey 😁👌👍

The sad part is the T5 series are a masterpiece compared to the T4 series.

We do it right because we do it twice lol Not that it is your fault but been there did that and I did not get a T-shirt

What rechargeable LED lights are you using these days? Coz I can't find a single light that's worth a good goddamn, not even the $70 PF's are worth a fuck.

@thecableguy1128

Жыл бұрын

Have you tried Nebo. The red rectangle light Warren has is a Nebo light. I have a few lights from them and they work great.

@MacPoop

Жыл бұрын

@@thecableguy1128 As long as they don't flicker or constantly need smacked to stay on or thrown across the shop in frustration

If only you could get reimbursed for the time you spend getting another part and installing again.

Bad parts out of the box: shockingly there are douchebags out there who will get a new part,replace thier bad part, clean the bad part so it looks new,and return the part to the dealer for a refund saying they didn't need it. Rather disgusting.

They need to pay for labor time for doing it twice

Manual shut-off valves work much better. Less b.s

Where and it’s a whole lot cheaper

Have you ever built a tractor 🚜 from scratch, totally disassembled ?.

I love your vids and have for several years but if I had one request it would be less language crudity. I'm not fussing but just giving you my opinion. If nothing changes I will continue to watch for I'm not judging you for we all have our things that others might wish we would change. I know I do. Thanks

That's not what you need .strip it all down fit the new part to find its faulty . 😩😩

What is your son doing is he not helping you anymore

👍 🦴🦴🦴🦴

Wasn't Tulsi gabbard in the Navy? What do you think of Tulsi gabbard Warren I'm talking to you can you hear me can you hear me now

@westerntruckandtractorrepa1353

Жыл бұрын

Oh, she's alright I guess.

Word work is who've owly

Trophy dropped get on its Rags to ritches mechanics hand zurk thought Nipernapper tappers 5as to much 5/8 14 barrel bolt bolts true up stangerd rubber boots scrape only sell sell Pontiac 60

@neilwalker8686

Жыл бұрын

……. What?

@ko9446

Жыл бұрын

How many jabs have you had?

The thing ting fart fan

Great video. Warren can you tell me what is the name of the website that you use for the manuals? Or Does anyone know the name of the website for the manual’s? My friend is looking for one for a ford 5000 tractor. Thanks

👍