I admire the fact you are completely unintimidated by the size or complexity of any task you may face in your daily work. The sheer force of your positive attitude and work ethic is admirable and then to hear you give a "shout out" to someone you have encountered and are impressed by is a recommendation of the highest order backed by a solid source. As always, Warren, thanks for taking the time and effort to share your craft.

Great videos! You are definitely an old school workhorse. That is very much a compliment, and I am absolutely amazed at your energy level ! Even with editing, you tag in some long,physically demanding hours. Not to mention mentally-with remembering how these various machines go back together! Keep up the great videos please. Thank you and Merry Christmas to you and your family.

Great off you to give Alex a Shout Out,, After the look up he is based in Tamworth,, Country Music Capital, Country Music Awards Aust, Day In January goes for good week. Out that way and plenty of other places here in Australia its drought time just been no rain, We have many country towns running out of water... Farmers are struggling with the lack of water, As we know in a drought no crops, big reduction in cattle that means no cash flow.. Farmers doing it hard so its wonderful when someone can help them out on something that can be expensive...

@bytefix2603

4 жыл бұрын

I had one customer who was charged over $12k for a gearbox problem that turned out to be a $25 dollar switch I diagnosed over the phone...I cut myself short a lot but the feeling of helping people who are struggling is what I live for. I have a drought offer available, so if you or anybody you know could use some electronics help, see my website. bytefix . net

Best channel on KZread

Credit where it is due young man you certainly put the hours in and bring knowledge with you! That crane on your service truck is a beast, I so wish I had one but here in the UK we don't have service trucks like you guys stateside. An awesome bit of kit and valuable tool to have. Stay safe and beware tiredness when working such long hours.

i enjoy watching ur videos a lot. reminds me of yrs back when my dozer would break down, and our mechanic would come out to work on it then. no air tools or battery run ones either, all by hand back then. lol thanks

I’d work with you as a apprentice in a heartbeat what a hard worker 👍🏻

I personally know Alex. I can vouch for him, he'll do anything he can to get you back on the road or back in the crop.

I always like watch you work on stuff where's it's an old cat or newer stuff. Hard to believe an engine went down at 1900 hrs. Wow. Thanks for sharing.

Yea it’s pretty cold here in K Falls right now but the weather is supposed to warm up for a few days before fall/winter sets in. Keep up the great work. 👍🏼

Man that was one short summer you had over there.thanks for the vid.

Keep up the great work Warren, thank you for sharing your knowledge and approach, life in the field does not equal life in the airconditioned OEM repair centre!

@jorgeantonioduranvalenzuel3019

4 жыл бұрын

Afortunadamente soy premiDo con una de estas bellesas de maquina de las cuales doy fe de lo bueno que sin

@jorgeantonioduranvalenzuel3019

4 жыл бұрын

Desde san juan de tunan

Great job, master mechanic Warren, you do the best video's, thank you so much.

Warren, I am bloody knackered watching this video.............time for a beer, amazing worker (not easy when you work on your own with nobody to throw ideas at) thankyou.

@westerntruckandtractorrepa1353

4 жыл бұрын

It's easier by yourself, then you don't spend all your time arguing on how to do it, you just do it.

Dangggggg ! .. that long-block looks pretty complete ..it even looked like it came with the pilot bushing in the crank-end ..Nice score..Nice work !

I enjoy all your videos!!! Thanks for making videos I like watching.

Thank you for the kind words Warren. I just like to help people, the bills are secondary

@harryweyer2174

4 жыл бұрын

FarmFix you Sir have earned yourself a beer from us,our shout,go past the fridge and enjoy buddy.cheers.

@bytefix2603

4 жыл бұрын

@@harryweyer2174 Scotch on ice for me!!

@bytefix2603

4 жыл бұрын

@aljanat5 anything except Johnny Walker haha

Yeah, ditto what MC said. Your a good man Warren. Really interesting show. I drive truck for a living and you have kept those long miles flying by, one end of the country to the next, I'm in your neck alot. Really cool to see you use Justin's impact he have you. Watch him alot too, you guys rock..

Interesting content Warren, thanks for the video!

Geez! I can see his breath! It’s hitting 100 here today!

man i wish you would send some of that cooler weather down to lower alabama, i am so tired of 90+. thanks for your time.

Maybe a helpful trick, maybe not. You may already know this. I have taken a variety of sizes of long bolts and cut the heads off of them. For example with the flywheel in this video or the transmission on the JD a few videos back. Take a couple of these bolts and partially screw them in and use them as guide/alignment pins. Thanks for all the great videos!

Well done Warren another great video

Be interesting to see what’s gone a drift in that engine as they don’t normally give much bother.

Interested to see wat was wrong with old engine . Enjoy your videos man keep it up

Goodyear Horizon hose. It's heavy as hell, but damn near bulletproof. My dad's old shop hose is still totally uncracked after 30 years, even though it's spent over a quarter of its life outside in the sun. Got all the usual shop chemicals on it, never really ever cleaned - only damage is some fading. Of course, 50 feet of 1/2", with 1/2" steel Tru-Flate on both ends, weighs about 50 pounds. And it is pretty stiff, like reinforced rubber hose usually is. Minimum coil is about 14". But it doesn't get *stiffer* even when it's just dug out of the snow. We use a 10 foot stinger of cheap 3/8" hose to get some flexability on the tool end.

Good video Warren keep them coming mate

looking good Warren , just did the same thing but it was a fiat 1080 .

1900 hours and she's toast!!!? That SUCKS!! But not unheard of.... $10k for the new engine is pretty good!!! Last one we had to replace was in the combine.. right at $20k with a factory reman by the time it was back in the field.. could have been less, but it was in the middle of harvest. Other recent one (10 years ago??) Was in a tractor, that one got an in frame... I think it was $12k when we got it back. Time is money, money is time.... Thanks for the video!!!

Great content as always.

Something tells me you're going to be in for one hell of a winter this year wherever you are.

@harryweyer2174

4 жыл бұрын

Jeffrey Murdock so does the farmers almanac,gsm coming in early.

@jesseburns9734

4 жыл бұрын

His main shop is in Macdoel California.

@smiffy1071

4 жыл бұрын

I follow wellker farms in Montana, and even in late September, they already had a foot of snow!

Congratulations on 40000 subscribers

As someone who is surrounded by non-mechanical types, you’re the neighbor I truly wish I had. “I’ll trade you a handful of sawbucks, a case of Meister Brau........if you can show me how to time a 3 cylinder diesel fuel pump”......would be my type of questions. Great video, keep up the fantastic work!

Salut tank you vidéo magnifique bravo

Warren Every time we've done a direct swap out engine, something always throwed a monkey wrench in the mix. Either a pulley or bracket. 🤔🤔🤔🤔🤔

Great video again Warren, you look well wrapped up? is it getting cold ?

Great video!!! Lucky he found that engine.... FPT is in short supply and horribly undersupported around here. Real issues with Case applications

@billl.8465

4 жыл бұрын

Ya, I've been trying to find a FPT engine for a Case SR200 skidloader. No luck.

Them fiatagri engine are unreal. Great engines.

One of the things I love about ya Warren straight up, no bullshit tell it like it is and the work is done right and you have a high standard behind the work you do. I can see why guys bring their stuff to you and why you seem swamped all the time

Looks like you’ve gone from summer time to winter time I can see your breath

Thanks again Warren

Je ben echt een held op gebied van motoren knap man echt

I would change the front prop shaft and bearing as you already have the front axle out as in the you uk they fail around the 3000h mark. The NF engine don't normally have engine problems we have only had one go in the last 7years since I've been work for new Holland & jcb! dealer

Great job 👍👍👍!

it is nice to Hear a " Pay it forward" word . This is worldwide " Networking" . when this swap is complete, would/do you I.D. the motor as a swap with changes? You have had tractor trailer cab with a mishmash of swap parts that caused confusion.

Gotta say it's the first time I've seen a nh with an engine fault, work at a nh dealership and never had am nh come in or heard of one for that matter with an engine defect

Sir, I have a question What kind of method do i use to get valve clearance on NH220 Cummins? The Inner base circle method or outer base Circle Method ?? Thanks.

Warren awesome videos!!!!!! You know your shit my friend.... just curious, what do u like doing best?

Curious to see if either of you checked to see if that was a bad series of engines, which might explain the "good" price?

Damn it's already cold there? We are still in the upper 90's here in Texas.

New engine , this is very good ...

Makes you wonder if it was a manufacturer defect or if the engine was sucking dust in to fail so soon.

Looks like ya got lucky & most everything fit between engines?

10grand aint bad, I was at the cat dealer checking out stuff and they wanted $60,000 for a on road motor its crazy

First also love ur vids

dang! gettin er done!

Three questions do you think the engine was not broke in correctly or poorly assembled and last question you mentioned about the horsepower difference do u think the injectors will be different I thought there is differences between the size too on horsepower

hi there mate nice videos " tell me what runs your air compressor on the service truce " seems like a pretty neat setup " I am in New Zealand doing light commercial servicing so would be keen to know Cheers keep up the great work

@rharris5811

4 жыл бұрын

It is run off of hydraulics, the transmission has a pto that drives a pump. Very good and quiet but also expensive.

@adrianhughes5693

4 жыл бұрын

@@rharris5811 I suspected as much and some sort of pressure regulator that switches the fluid back to a tank I suspect nice setup

Donde venden esa nueva unidad para poder poner esos filtros de combustible ⛽️ ; que son de otras marcas

Good video, but did I miss the end of the engine swap in the 379?

@westerntruckandtractorrepa1353

4 жыл бұрын

Haven't had a chance to work on it.

Dude, is there something wrong with your lift? It appears to go up when you go sideways.

At the end of video, At the hose job. Sure were a bunch of bales. What were the bales?

@seantatham9960

4 жыл бұрын

jake legg Looks like fumigation poly all baled up to be recycled

what do you use to flush/clean oil coolers?

God damm man eyes straight forward hair straight back and bolls to the wall . Just a givin er eh

Smash the thumbs up button ya doodle whackers,make this channel again and again,needs three thumbs up buttons.

Like this video Alot,,,

Don’t know what happened to last motor, but I hope he cleans his air filter and changes the oil on this one. Doubt he will find this deal again.

@chucklesx

4 жыл бұрын

Tbh if you never serviced it an engine should last longer than 1900 hrs. I'd say the original engine was doomed from day one, either something was installed badly and was missed during quality control or there was a faulty part used which failed and led to complete engine failure.

@wvmeg

4 жыл бұрын

I own this tractor, i bought it two years ago with 1300 hundred hours. I disked and chisled with it. I gave it a full service twice since I bought it reilowski. Its easy to sit behind your computer and take shots at someone else’s misfortune.

@breikowski

4 жыл бұрын

wvmeg we all been there. Hope it works better now.

FLEX ZILLA HOSES WORK GREAT

Was question my self is this your job or your own tractor ?

Do they change anything physically between different hp engines (cheaper parts on lower hp engines?), Or is it strictly software?

@westerntruckandtractorrepa1353

4 жыл бұрын

Software

What would cause all of that crap in the turbo with low hours?

@scottgibson7534

4 жыл бұрын

Long ideling hours, or bad fuel. Also lots of oil burining.

@michaelmcclure8673

4 жыл бұрын

Long idling at low engine speed. You should idle the engine to a higher level when doing that.

👍👍 have to try and get in touch with him see where in strayla he is in might be able to help me with my issue

@bytefix2603

4 жыл бұрын

Northern NSW, I travel anywhere, depending on how bad your issue is haha

@harryweyer2174

4 жыл бұрын

FarmFix once he hooks his computer to the unit and you interface with his computer 💻 you can do it from anywhere can’t you?

@bytefix2603

4 жыл бұрын

@@harryweyer2174 Sure can, prefer to be on site but remote diagnostics is almost good enough. 0455 553 050

Does using the truck engine to power all the extensions (air, crane etc) count as harmful idling? Or is it designed with it in mind?

@peterhaan9068

4 жыл бұрын

Harmful idling is only a problem to the brain dead liberal legislature in CA and of course to the vacuous citizenry that elected them!

@connorvelthuis2221

4 жыл бұрын

From the engines point of view it’s probably not the nicest thing. For emissions, fuck it!

Warren the face book link for Bytefix that you listed is Alex's personal page.

@bytefix2603

4 жыл бұрын

facebook.com/ByteFixAU/

Did this dude get finished? It was a success I assume!

Bravo bravo spicialle

Why are you not tightening things in a star pattern? This is standard in the repair industry when tightening fasteners (star pattern).

👍👍👍👍

it's either 40 below, or that's some cheesy air hose Warren!

How long does that m18 battery last you in the field?( average days work)

warren gloves datenight?

what no sleevs? is that the whole point, rebuild in frame no removeiong the motor for a rebuild..

You should invest in a hose reel and mount it on the back of your truck

@westerntruckandtractorrepa1353

4 жыл бұрын

I there is one there already, it's 1/2 inch hose which I use with the big guns

Are you still looking to hire someone for help?

hello my friend, error code 5034 tractor new holland t7040 2008?pleass tell me 🙏

Protect your eyes

ooh shiny

lol its still hot as hell in texas

Id be spoiled as milk left in the sun if i had that crane too. 😆 it helped make light work of the job.

Wow, 1900 hours. That sucks !!!

To bad ☹️ no more stories

Only 1800 hrs we put 2500 on ours its first year wow

I would appreciate it if you add subtitles to Western truck videos.

I pray you swapped the New Filters back to the New engine as soon as you finished swapping the Filter Manifold ! Don't want to feed the new engine the same poison that killed the old one. sdh in CT

@westerntruckandtractorrepa1353

4 жыл бұрын

Of course we swapped the filters, the metal was in the oil not the fucking fuel.

@seantatham9960

4 жыл бұрын

steve holton You don’t give the man much credit do ya?? Dammmnnnnn!!🙄

Ok. Who's Alex?

@bytefix2603

4 жыл бұрын

Me

@bytefix2603

4 жыл бұрын

bytefix.net

What the hell were you doing man!

That last tractor with the black smoke, surely that suggests over fuelling, or blocked air cleaner rather than a bad turbo....last time I had a blown turbo it was thick white smoke......

@westerntruckandtractorrepa1353

4 жыл бұрын

Intake impeller on turbo was broke

@smiffy1071

4 жыл бұрын

Ahhh. That’s a different kind of turbo failiure than I expected. I was thinking more like bad oil seals allowing oil into the exhaust.

เครื่องราคาเท่าไร

our t7000 has 9000 hours 250hp, new had a problem sounds like new, bet this guy pored hydraulic oil into the engine or something or ran it without air filter

1900 hours? Jeez that's depressing..