I had 2 of them go out. 1 I just plugged in the 2S battery and the 👻 escaped. Since they are on backorder; I went with a Radiolink transmitter and receiver. For the ESC I went with the Lizard Pro. 🦎 I'm happy I went that route.
@ricklabelle90752 жыл бұрын
Haven't had a problem with mine yet. But thanks for the heads up.
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching 😊
@remingtonlusby74112 жыл бұрын
I’ve had three of them do the going forward thing
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching ☺️
@YOOPDLRC2 жыл бұрын
Great video 👍😎👍
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching 😊
@johnniemeyer31392 жыл бұрын
We have 3 with the new esc and one with the old . No problem with the esc’s but one remote went bad .
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching 😊
@joncolonna86562 жыл бұрын
I lost reverse with mine ,I too ordered.a.new that is backorder till late June sometime. It happened after I installed a Injora transmission.
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching 😊
@texomarc2 жыл бұрын
Both of mine will sometimes do the backup thing that won’t trim out. Turning it and the radio off and back on has always sorted the issue.
@texomarc
2 жыл бұрын
Also, under super small load, creeping as slow as possible, they’ve just stopped responding. Same fix.
@justcrawling1916
2 жыл бұрын
My Gladiator will drain the battery if not unplugged but runs fine. The Bronco had issues from day 1. Also, it was really noisy.
@islandrc-duke19722 жыл бұрын
bummer when stuff goes out,cool you had a replacemrnt
@justcrawling1916
2 жыл бұрын
It doesn’t slow crawl as well but still going
@islandrc-duke1972
2 жыл бұрын
@@justcrawling1916 👍😊
@trevorthomas60432 жыл бұрын
Having both esc,s the new esc is a lot smoother.I haven’t had a problem with the new esc.I have four of new units.Only problem I have had,is that the new furitek doesn’t work with the new unit.
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching 😊
@satorrotas2 жыл бұрын
It's bad luck, on three esc like yours I've never had a problem, well for now. You should have sent it back to where you bought it to have the esc replaced because your Bronco is under warranty 😊
@justcrawling1916
2 жыл бұрын
I like your channel and content my friend 👍😊
@satorrotas
2 жыл бұрын
@@justcrawling1916 Thanks my friend 😉👍
@adrianau42462 жыл бұрын
The only problem I’m having sometimes , is when I turn it on it can be creeping forward/backward and I got to trim it out till I don’t hear any wining in the motor..
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching 😊
@crazylegz210102 жыл бұрын
My battery pin on the esc bent i had it warranty today and there sending my a new but im going to do the furitek lizard pro
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching ☺️
@noahtapia56382 жыл бұрын
I bought my mom a jeep and we upgraded the servo and we couldn’t use it so we had to put a old esc in it and it works fine the new esc is bad
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching ☺️
@NoThisIsPatrick.2 жыл бұрын
Only problem I had with the new one is that it wouldn't stop rolling forward even if was in the off position til i remembered I needed to fully seat in the power connector to it. It's a weird issue.
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching 😊
@yoboadagoat Жыл бұрын
Mine creeps backwards some times
@justcrawling1916
Жыл бұрын
Every one of the new axial scx24 esc’s I have had went bad. I switched my rigs back to the version 1 esc as they are bullet proof and water resistant. I did have 1 of the version 2 esc that started out like yours, just creeping back, then the esc went out soon after that problem started
@sidewinderscustomgarage16142 жыл бұрын
Yeah man went out, staring was all Twitchy and then the throttle would stick. truck had a mind of its own
@theeonlyjericho
Жыл бұрын
Same thing happened to mine!!! It was twitching then now it crawls by itself lol
@Redrockwood Жыл бұрын
Two ESC burned for no apparent reason. The third has malfunctions on the steering
@justcrawling1916
Жыл бұрын
I went back to the gen 1 axial esc due to that reason
@anbgame27722 жыл бұрын
LIKE 👍👍👍👍👍👍👍👍👍👍👍
@danielmillard37622 жыл бұрын
Yes I have and been waiting over 3 weeks and still NOTHING not impressed with Axial, I have 2 RGT’s that are 2 yrs old and have only 1 steering servo go out
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching 😊
@shlomogoldstein33732 жыл бұрын
Mine wont recenter the servo. It's really annoying. It is also way slower than the day I got it
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching 😊
@fox.rc.88462 жыл бұрын
Is axial getting you the replacement ? If not would forsure contact them .
@justcrawling1916
2 жыл бұрын
June is the quickest they can get me a replacement. Thanks 🙏 for watching 😊
@orrc162 жыл бұрын
😡😡😡that's a shame
@stephenb78222 жыл бұрын
Don't waste your time with the stock junk that you can't get, get a furitek iguana, way better and have them in 2 scx24's, you will need new Transmitter but that's also a good thing compared to stock junk Transmitter. No regrets
Пікірлер: 46
I had 2 of them go out. 1 I just plugged in the 2S battery and the 👻 escaped. Since they are on backorder; I went with a Radiolink transmitter and receiver. For the ESC I went with the Lizard Pro. 🦎 I'm happy I went that route.
Haven't had a problem with mine yet. But thanks for the heads up.
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching 😊
I’ve had three of them do the going forward thing
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching ☺️
Great video 👍😎👍
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching 😊
We have 3 with the new esc and one with the old . No problem with the esc’s but one remote went bad .
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching 😊
I lost reverse with mine ,I too ordered.a.new that is backorder till late June sometime. It happened after I installed a Injora transmission.
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching 😊
Both of mine will sometimes do the backup thing that won’t trim out. Turning it and the radio off and back on has always sorted the issue.
@texomarc
2 жыл бұрын
Also, under super small load, creeping as slow as possible, they’ve just stopped responding. Same fix.
@justcrawling1916
2 жыл бұрын
My Gladiator will drain the battery if not unplugged but runs fine. The Bronco had issues from day 1. Also, it was really noisy.
bummer when stuff goes out,cool you had a replacemrnt
@justcrawling1916
2 жыл бұрын
It doesn’t slow crawl as well but still going
@islandrc-duke1972
2 жыл бұрын
@@justcrawling1916 👍😊
Having both esc,s the new esc is a lot smoother.I haven’t had a problem with the new esc.I have four of new units.Only problem I have had,is that the new furitek doesn’t work with the new unit.
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching 😊
It's bad luck, on three esc like yours I've never had a problem, well for now. You should have sent it back to where you bought it to have the esc replaced because your Bronco is under warranty 😊
@justcrawling1916
2 жыл бұрын
I like your channel and content my friend 👍😊
@satorrotas
2 жыл бұрын
@@justcrawling1916 Thanks my friend 😉👍
The only problem I’m having sometimes , is when I turn it on it can be creeping forward/backward and I got to trim it out till I don’t hear any wining in the motor..
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching 😊
My battery pin on the esc bent i had it warranty today and there sending my a new but im going to do the furitek lizard pro
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching ☺️
I bought my mom a jeep and we upgraded the servo and we couldn’t use it so we had to put a old esc in it and it works fine the new esc is bad
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching ☺️
Only problem I had with the new one is that it wouldn't stop rolling forward even if was in the off position til i remembered I needed to fully seat in the power connector to it. It's a weird issue.
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching 😊
Mine creeps backwards some times
@justcrawling1916
Жыл бұрын
Every one of the new axial scx24 esc’s I have had went bad. I switched my rigs back to the version 1 esc as they are bullet proof and water resistant. I did have 1 of the version 2 esc that started out like yours, just creeping back, then the esc went out soon after that problem started
Yeah man went out, staring was all Twitchy and then the throttle would stick. truck had a mind of its own
@theeonlyjericho
Жыл бұрын
Same thing happened to mine!!! It was twitching then now it crawls by itself lol
Two ESC burned for no apparent reason. The third has malfunctions on the steering
@justcrawling1916
Жыл бұрын
I went back to the gen 1 axial esc due to that reason
LIKE 👍👍👍👍👍👍👍👍👍👍👍
Yes I have and been waiting over 3 weeks and still NOTHING not impressed with Axial, I have 2 RGT’s that are 2 yrs old and have only 1 steering servo go out
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching 😊
Mine wont recenter the servo. It's really annoying. It is also way slower than the day I got it
@justcrawling1916
2 жыл бұрын
Thanks 🙏 for watching 😊
Is axial getting you the replacement ? If not would forsure contact them .
@justcrawling1916
2 жыл бұрын
June is the quickest they can get me a replacement. Thanks 🙏 for watching 😊
😡😡😡that's a shame
Don't waste your time with the stock junk that you can't get, get a furitek iguana, way better and have them in 2 scx24's, you will need new Transmitter but that's also a good thing compared to stock junk Transmitter. No regrets
@justcrawling1916
2 жыл бұрын
Thanks for the advice 😊