You're easily one of my favorite car builders. You put the time and effort in where it counts, but more than that it's done right.

@luckysgarageshow

4 жыл бұрын

Kenneth Monson Thanks Kenneth

You are a Gentleman and an Automotive Scholar Lucky! Thanks man!

Thank you for the longer than normal video, It’s nice to see your amazing work more the 5 minutes at a time, but I understand you do what you can to update everyone when you can. It would be cool though to see a good 30-45 minute banger when you get ready to do the turbo kit. Anyways, keep up the great work I appreciate the content.👍🇨🇱

Your shop truck keeps getting better and better, can't wait to see it turbo'd soon!

Looking good,pukka shop tuck 👍👍

Damn Lucky! All of your builds are so clean and well planned out. Shop truck`s gonna rip.

Sounds smooth and sweet. Love that low rumble. Never seen the ps and ac pumps installed that way, it's really cool and convenient. Great vid, thanks.

Lucky, you always produce the cleanest installs.

@gasratzcustoms

4 жыл бұрын

John the dude is good!!

Nice work.

Nice truck Lucky!!

Truck sure has come a long way

You gotta show us the chicken dance you guys did when you raised it up on the lift because you set the motor in, raised it up, danced under it and bam!, it was running. I gotta learn that dance. LOL

Really clean install....

A straight six and I'd be happy. That thing is a monster.

Keep the c10 vids comin lucky! Can’t get enough of em. Honestly it’s why I subscribed😉

"Shop Truck"!? Gonna have to name this beast. Can't wait till the next MT truck shoot out.

I love these little updates, thanks Lucky

“Alexa” install my motor and get me lunch 🤪

@joereyes2632

4 жыл бұрын

Good Job! Mark and Joseph!

Awesome build Lucky !

You know if you had Tony from HotRod garage it would be either blown up or on fire. Frieburger would Roadkill wire it. Dulcheck would want to put a big carburetor on it. Finneagen would straight axle it.

@slow5oh89

4 жыл бұрын

No, Finn would have bagged it... then never finished then build.

I like all your junk! Thanks Lucky

Your very talented,I learn a lot from you 👏🏻

@gasratzcustoms

4 жыл бұрын

Geo Martens hes very talented !!!

Love the shop truck Lucky. Thank you.✌🏼👍🏼🤘🏼😎

My love for that truck grows. Great update as usual. ✌

Very cool Lucky.

As always, awesome job and it’s going to be a screamer when you get that turbo on it

I never saw someone use that kind of hook to lift an engine. Safer. Good job.

@gasratzcustoms

4 жыл бұрын

SpatialDragon its a sick hook!

Hey lucky you inspire me! I'm currently doing a bed shortening deal like the one you and Tony did on that 67...

Nice shop truck!!!

Love it love those 1967-1972 C/10's

11-minute video from Lucky and me with no popcorn... Look forward to seeing the cross member upgrades you spoke of, will you be boxing the frame as well ?

Lucky, that is a sweet ride!

Nice ! No more funky noise

Looking good and runs like a top

Great thinking forward on ac and power steering

@gasratzcustoms

4 жыл бұрын

Doug's custom car garage its little tips like that only a pro thinks of!

Looks really good under their lucky as always thanks again buddy

Love that truck man, would love to swap my 86 square body. Someday....

Excellent video Thanks

You are a good man Mr, Costa.

Love that truck! Wish I could find one.

That’s some sweet junk bro.

Best shop truck ever!

Sounds great

haha... if thats junk... ill happily clean your shop for you lol... seriously though nice truck.. nice toys all around

Great junk you got though.🤪🔧

I am looking forward to the turbo testing

I like the pull away for engine swap accessories. Now your stuck with LS, darn

Sometime soon, you'll have to shoot us a "tool tricks" episode where you show off some home-made shop tools like that engine hoist swivel hook...

i really wish this system was out when i did mine. i used the holley mid mount.

Sounds good Lucky

Lucky if you read this what or who makes that ac / alternator/ pump bracket didn’t look stock👍🏻✌️

@luckysgarageshow

4 жыл бұрын

PB Machines I read it.... it’s the Holley Mid Mount accessory drive

@pbmachines972

4 жыл бұрын

Lucky’s Garage Show hey right on thanks 👊

That's nice.

NICE !

Keep the videos coming lucky

Love ur junk!

Track truck, or just a cool cruiser? Either way, it's one sweet machine. Can't wait to see the finished product. 👍👍

Love your "junk"👍

@stvmassacre

4 жыл бұрын

🤣🤣🤣🤣🤣🤣🤣, you love his junk.

great junk!!!

Best junk around

Like the truck but love the Chevelle

You have the best "junk"

That thing sounds like a beast! What kind of heads are you running? I have a 2001 Z06 that I like to maybe have some work done on. Other than exhaust and cold air, it's stock.

This is what I want to do to my 96 caprice

good junk mate

Love the truck. I hope you're being serious about the turbo. That would be bad ass!!

@brand-x7049

4 жыл бұрын

Of course he's serious. Naturally-aspirated is boring. :D

Great update. I like how you do things the correct way. May I ask how the brakes are without a booster? I’ve contemplated not using a booster on a truck I’m putting back together because I won’t have sufficient vacuum. Thank you.

@luckysgarageshow

4 жыл бұрын

Jaben Ross the Baer ReMaster works great with my Big Brakes but I would use a booster for stock. Maybe EBC electric brake company

@jabenross5986

4 жыл бұрын

Thank you sir

You must be listening to Mike Rowe "Safety third"

5.3 iron block bored out to 5.7?

Sweet

Badass,

My Alexa legit turned on my radio 😂

@gasratzcustoms

4 жыл бұрын

cody leavitt hilarious!!!!!

Love the videos. And I'm excited that I was the 666th like for this video also. The goat sacrifices have been paying off.

@luckysgarageshow

4 жыл бұрын

Sean Jones 🤘😆

Alexa, start and dyno tune my truck.

You make it look easy-peasy. Masters of their craft are just that way. Do you find heim joints noisy or any other problems with them?

@luckysgarageshow

4 жыл бұрын

AustrianAnarchy No problems from QA1 at all ..

Too nice for me lol. Your becoming a gold chainer haha. Jk. I do love it. Money spent in the right places.

the only good thing to come out of california!

@bobfalfa76

4 жыл бұрын

It's a good thing they have some great car guys out there or that place would be completely worthless

@willierepairone5389

4 жыл бұрын

Fugging LOL !

So as someone staring down a grenaded ls6 this winter, is there a sweet source on aluminum LS blocks I should be looking at?

Most enjoyable car guy on tv or the internet. Love what you do and how you act lucky. Why do you guys swap motors so often? And can I have one to replace my s10 350? 😆

@v8sserieschevy917

4 жыл бұрын

I lied it's a 305..... 😭😢

I love your junk..... I want you to build some junk for me

Nice junk!

pfffffft. Dirt just adds character. :)P

Lucky i love you

Do LS motors have block drain plugs?

I have a 68 GMC 1/2T build going on right now,my question is what size and make of fuel cell(tank) are you upgrading to?

noticed you left the PVC tubing from the pass valve cover to throttle body off. is that a big deal? I noticed on your supercharged chevelle you have them blocked off as well..

@luckysgarageshow

4 жыл бұрын

Jarrod Burnett I tap the back of the valve covers and run a -8 to a Oil separator

Has there been mention of the motor specs? Displacement, bore/stroke?

@brand-x7049

4 жыл бұрын

From this video and the last, I'd guess an LM7 or similar 5.3L that's been bored out .100" to bring it up to 5.7L, then given the forged crank/rods/lo-compression pistons treatment. But that's just spitballing.

Did you modify your inner finders or did you buy them that way? It looks like they're trimmed for more suspension travel.

@luckysgarageshow

4 жыл бұрын

Chase I trimmed them just because they look better

lucky for President

Specs on the new lower end? I guess I missed them

Hey lucky where did you get the hook set up for your hoist

👍🏿👍🏿

Hey Lucky, what headers are you running, before you put the turbo in?

@luckysgarageshow

4 жыл бұрын

mattyp530 Hooker long tube BlackHeart

What’s the plan for the little ls that came out the truck?

Where did you buy the heater delete panels?

@luckysgarageshow

4 жыл бұрын

Jason OLeary it’s part of the VintageAir kit. I just requested it with no holes .....

Where can I get a swivel hook for my engine hoist? Love the content and keep up the good work.

@luckysgarageshow

4 жыл бұрын

Jeff MacDonald You gotta make one.....

@jeffreymiers8793

4 жыл бұрын

Ya, saw that too.... always by myself with the engine sideways going in or out.

@bobfalfa76

4 жыл бұрын

You can get a swivel eyelet that will weld or bolt to your lift plate, I got one from a place that reman's large diesel engines, they use them to move the blocks and heads around. You can also find them at steel companies.

Is the block iron or aluminum. Witch is better for torque and boost

Next week. installin' a hyberd lectric motor

Alexa install my motor. Millennial says really bro? There's an app for that.

@maxfastest

4 жыл бұрын

Totally !

@gasratzcustoms

4 жыл бұрын

breakerbroke23 hilarious!!!

Bad Ass junk !!

Cool junk