New Carb Upgrade and a Homemade Airbox for the Tao Tao Coleman 125 Atv
Автокөліктер мен көлік құралдары
Tao Tao Coleman 125 ATV carb replacement and carb upgrade. I review 3 different carbs. that work on this machine. I'll show the differences and why the newset is the best so far. I also make a cheap air box out of tupperwear to help keep water and excessive dust out. You'll see it in action splashing through puddles and not a single hiccup. Simple and still staying on the cheap end with upgrades for this cheap quad. Thanks for watching.
I'm unable to add direct links at this time. please copy and paste. they are both ordered from amazon.
Parts:
FLYPIG Intake Manifold Gasket Spacer Insulator for GY6 125cc 150cc 4 Stroke QMI152 157 150cc GY6B 4 Stroke ZNEN Engines Taotao Roketa ATV Dirt Bike Go Kart 4 Wheeler
a.co/d/5adMhKa
NIBBI Motorcycle Carburetor, PE19mm Flange Carb for 100cc-125cc with Carb Jets, for Dirt Bike Pit Bike ATV Go karts Moped Scooter 2/4 Stroke Engine with 45mm Air Filters
a.co/d/9OtQbcI
Chapters:
00:00 Intro
04:32 New Carb & Air Box
09:12 New Carb Jet Sizes
14:30 Carb & Air Box Install
17:38 Start Up
18:55 Trail Test
20:39 Outro
I am not a certified technician. These videos are for entertainment purposes. Please work on your own equipment at your own risk.
I own the license and rights to all music in this video. TakeTones.com
Пікірлер: 14
Just tried this. My throttle cable is too long. Did you have to change yours? Ran out of adjustment
@NOURSEPOWER
20 күн бұрын
Yes, it was. I remember I noticed after I recorded. I used a part of a bicycle brake part as a spacer. It's hard for me to describe. It's the metal sleeve usually on the end of the plastic part of a brake cable. I put it in between the throttle cable end and the throttle slide cap of the carb. It's basically inside the rubber sleeve thats attached to the cap.. Just make sure it's going to pull out the slack and not get stuck in any way, causing the throttle to not close all the way. I hope I'm not confusing you, too much. This has been working for me. Hope this helps you figure it out. Thank you for watching.
Loved the donuts at the end.
@NOURSEPOWER
3 ай бұрын
Kid loves his donuts. Especially with sprinkles! 😆
Very informative especially the jet sizing. Subbed.
@NOURSEPOWER
3 ай бұрын
I'm happy to help. Thank you for watching and subscribing to the channel.
They way you’re saying nibbi the first time is the right way 😂😂
@NOURSEPOWER
2 ай бұрын
😆 thanks, my friend. So far, so good on that purchase. This is a bike, I just don't want to put much money into it, but I have worked hard to get it safe and reliable. Thank you for watching.
Don't worry I don't need that Tupperware.
@NOURSEPOWER
3 ай бұрын
I don't know what you're talking about. 😬
Got a link to the spacer?
@NOURSEPOWER
Ай бұрын
Thank you asking. I didn't realize I never added them. The parts are now in the description. You will need to copy and paste. I'm currently unable to add links in my descriptions. I think it's bc the channel isn't big enough. Thank you for watching.
I did this to mine and it’s dumping to much gas ?
@NOURSEPOWER
Ай бұрын
I tuned the carb lean- pilot, needle & main to counter the homemade air box. Still slightly on the fat side with the provided jets, but runs better than previous setup. My favorite part is the bike starts right up. That was always my nightmare from out the box with this thing. If I come up with something else I'll make an update. Thanks for watching.