New Airfix
Тәжірибелік нұсқаулар және стиль
Airfix's new 1/24 scale Supermarine Spitfire Mk. IXc is finally here! In the previous two videos I started working on the basic cockpit and the wings, including the ammunition and weapon bays. In this video I finish painting the cockpit, apply the decals to the instrument panel and other areas of the cockpit, do a tiny amount of chipping, and then close up the fuselage. In the next video I will be building the Merlin engine that powered the Spitfire.
View other videos in the Airfix 1/24 Spitfire playlist: • Airfix 1/24 Spitfire M...
Ways to support my channel:
Patreon: / modelnerd
KZread membership: / @modelnerd
Amazon store: amzn.to/370Fk7H
Ko-Fi: ko-fi.com/modelnerd
Instagram: / model.nerd
Music credits:
Midsummer Sky by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 licence. creativecommons.org/licenses/...
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Пікірлер: 63
Wow looking fantastic. Enjoy how you climbed that mountain of problems and you won. That's modeling. Best part is you showed how to correct it so it can help others. 👍👍 great job.
@ModelNerd
Жыл бұрын
Thank you very much Clayton!
@brianhurley6289
Жыл бұрын
Build Tamiya! You won't have to climb no mountains!
@josealejandroalvaradobotei8584
Жыл бұрын
@@ModelNerd 🤟🤟✈️ gran trabajo 🇨🇱🤞
I’ve bought my first 1/24 scale model only 3 days ago (hid it from my wife😂), it’s a Junker JU-87B-2 new tooling model so looking forward to doing that, watching your video giving plenty of info and funny enough I had the same fuselage fitting problem on the 1/72 scale spitfire (knowing I’d also made a bad fitting internally), your comment about some parts not being seen once the fuselage is closed up makes me think it would be good if they could make some sort of a clear section available on one side for display optional purposes, I’d consider it in the larger scales Great video
@ModelNerd
7 ай бұрын
Clear sections are an interesting idea: when I built my HK 1/32 Lancaster I used clear parts for one half of it (although it could be argued that the HK kit lacked sufficient detail to bother!). I've got the RFM Panther cutaway version which also looks interesting. Enjoy the Ju-87!
What can I say? Absolutely beautiful, especially the cockpit side walls and the instrument panel.
@ModelNerd
Жыл бұрын
Thank you!
Excellent narration and applaud the errors and rectification dialogue
@ModelNerd
Жыл бұрын
Thank you Mark
I had similar rear bulkhead fit problems with my Revell Mk 9 (1/32] with the Eduard Brassin cockpit like your problem solving and pointing out the areas of concern. And that Brass paint came out nice. Looks more realistic than what I’ve experienced with Vallejo.
@ModelNerd
Жыл бұрын
Thanks Bryan - glad you liked it
Yes very enjoyable to watch...look forward to the next step.
@ModelNerd
Жыл бұрын
Thanks
I have found with earlier 1/24 Airfix kits the tolerance of the part is so tight that leaving paint on things like the airframe parts will cause issues. It is always worth cleaning out the slots and tha mating side of the frame.
@ModelNerd
Жыл бұрын
Yes, you're right. Bandai kits are another example where this is essential. I cleaned up the mating surfaces of the bulkhead inserts, but stupidly forgot to put masking tape into the slots themselves - and of course, it is virtually impossible to get paint out of those once its in.
@Wavey1988
Жыл бұрын
@@ModelNerd the only thing I have found to get paint out of places like that is the little interdental brushes and the appropriate thinner
Mine arrived in the post today, I'm finding your build informative and helpful as I've not done any modelling for years. This build may be put on the back burner while I practice on cheaper kits first.
@ModelNerd
Жыл бұрын
Glad to find it was helpful, David. It wouldn't hurt to practise on a cheaper kit (useful to first check on Scalemates to see how old the tooling is). This kit has no major pitfalls except for the ejector pin marks in the wings that I should have filled earlier. Ooops.
Great video of a great build of a superb kit!
@ModelNerd
Жыл бұрын
Thank you Ray
Looking good .. more nice production and modelling
@ModelNerd
Жыл бұрын
Thanks Ian
Awesome work! Very nice and informative video! Have fun modeling! 🤜🤛👍
@ModelNerd
Жыл бұрын
Thanks mate!
Nice work! Looking forward to building this. When I built the Hellcat I somehow managed to get the cockpit rotated ever so slightly and that created all kinds of problems. Liquid Mask became my best friend in that build and it will be in this one. On the Hellcat I installed magnets to hold several of the removable panels in place. If the panels fit well it doesn't take much to hold them.
@ModelNerd
Жыл бұрын
Thanks. Yes, I need to lool into finding some small magnets.
Great video, thank you for showing how this went togethet
@ModelNerd
Жыл бұрын
My pleasure! Glad you enjoyed it.
Doing a fantastic job
@ModelNerd
Жыл бұрын
Thank you Mark
Thank you for this great video. It's looking fantastic. Mine arrives for Christmas I hope.
@ModelNerd
Жыл бұрын
Thanks Brian. Have fun with your kit!
Looking good mate, itbis looking to be a great kit, good luck with the rest ofbthe build, best rsgards from a Kiwi living in Australia.
@ModelNerd
Жыл бұрын
Thank you Les
Thanks for this walk trough on your build. Seems like painting the parts causes problems at some points making the fit to tight. Nice kit though!
@ModelNerd
Жыл бұрын
Thanks. Yes, paint may have been the issue.
@olliety
Жыл бұрын
@@ModelNerd I wonder if these tolerances are a byprodulct of CAD design? The parts are designed to fit so snugly, a layer of paint can throw things off?
@ModelNerd
Жыл бұрын
@@olliety I think you're right
Just a comment for the algorithm
@ModelNerd
Жыл бұрын
Thanks
The cockpit looks very good and Airfix seem to have put a lot of effort in. Its a shame about the cockpit fit in the fuselage. I was wondering if it would be best to build the cockpit in the fuse half so you can be sure that the frames are fully home and centred at fuse seems.
@ModelNerd
Жыл бұрын
With hindsight I think you're right - that wouls be a good approach
Really enjoying your build itching to start mine in the new year, I think it’s wrapped under the tree 🌲. Can I ask a question: with so much detail do you think it could displayed in a cutaway format or several removable panels as it seems such a shame have it all covered. Regards Fred
@ModelNerd
Жыл бұрын
Thanks Fred - I hope Santa has indeed been good to you! In terms of the cutaway - the engine panels can be left off (there is no option for magnets to keep them attachable, unlike some kits). The armament covers can be left off too (or just dropped into place instead of glued). A lot of the cockpit is visible still (if you have the canopy open). To be honest I can't think of any extra detail that would be revealed by a cutaway - there tends not to be too much in hidden places.
@FredWilbury
Жыл бұрын
@@ModelNerd many thanks for the reply 👌
🤝👍
@ModelNerd
Жыл бұрын
Thanks
4:17 There is a reason you had trouble with the decal on the part with the raised center. The decal is scaled wrong, it is too small. The white dots are supposed to line up with the two other raised bumps.
@ModelNerd
Жыл бұрын
Yes, looking at reference photos it does seem rather small, doesn't it?
I think I found a mistake in the instructions. Part D53 looks like the headrest for the seat that attaches to the armoured plate above the belts. It is not shown anywhere in the model and not mentioned anywhere in the build but can be seen in the diagrams for the Canopy on the top of page 11 of the instructions. Checking photos of the Spitfire seat the headrest is present. Looks like the factory missed this part entirely in the build.
@ModelNerd
Жыл бұрын
Good point - I hadn't noticed this before. I'm guessing headrests were common to all marks?
@joyjppercival131
Жыл бұрын
They seem to be from all the reference material I can find online. It seems a simple fix to the error, paint part D53 matt black to look like leather and glue in place once the belts have been installed i roughly the centre of the armoured plate.
would the cockpit pipework be copper rather than brass?
@ModelNerd
Жыл бұрын
I wondered that too, but the instructions call out brass and in the images I've seen (many of which are restorations, I admit) the pipework is either brass or painted interior green.
@ianallan8005
Жыл бұрын
@@ModelNerd the pipe work would probably be from a proprietary alloy called Tungum. This is a Matt brass shade
Would you recommend this kit for some-one that doesn't like Airfix kits?
@speedymg1962
Жыл бұрын
NO !!!!
@ModelNerd
Жыл бұрын
I guess it depends why you don't like them!
@johntreloar8203
Жыл бұрын
@@ModelNerd Airfix have gotten a bad rap over the years, but the more I see this kit the more I like it.
@ModelNerd
Жыл бұрын
@@johntreloar8203 Yes, I think they went through a difficult period and made some not great decisions, but thd company has really been turned around now
Mr Metal color do a nice brass,its MC219,the seat base colour is called Russet.
@ModelNerd
Жыл бұрын
Thanks Lee