*Let me know some other tips and trick I might of missed!*

@user-ec7xk2we8o

Жыл бұрын

Never stick your watch up your bung hole

@BobbyDazzler888

Жыл бұрын

Over polished watches can be repaired by laser welding buddy

@krasimirpanayotov1371

11 ай бұрын

I can go for a date setup. Lovly videos :))

@AgusMulyandi

9 ай бұрын

Also, if you wanna like shiny things on your watch. Buy factory not ice out bullshit.

To be fair, most modern automatic watches have a feature called a slipping bridle that prevents it from over winding. A slipping bridle is a special pre-tensioned expansion spring that is connected to the end of the mainspring. Watchmakers needed to come up with an innovative method to allow you to wear the watch and not overwind it through the motion of your daily activities. And that’s how they did it.

The one thing I don't believe is getting the watch serviced every 4-5 years, unless you're really hard on it and wear it every day. I think 7-10 years is more than enough personally

@FightingMango

Жыл бұрын

Agreed. I took my 2009 Omega Seamaster to be serviced after 9 years in 2018, not because anything was wrong but just because it felt like I was “behind” on the servicing. Never again. I had to take it back about 4 times to get the accuracy back to what it was before I took it in for service. Freaking annoying. I’ll not do it again. Only if my watch is not accurate or there’s something wrong will I get it serviced.

gracias x los consejos ....

Great video! Thanks Danny

@happyjewelers

Жыл бұрын

Thank you! 🤝🏽

Awesome advice!

Thank you Danny 🤗 for such informative video and keep making videos like this.

Great advise indeed!

About the polishing, just use your watch and enjoy it. People that buy for selling are not the real watch lover. A watch lover wears his watch and that’s it. Ps: the case should never be bigger then your wrist, it doesn’t matter which brand you pick, if you can’t rock a 44 mm Rolex you also can’t rock a 44 mm Hublot.

Danny, you make great points. Under what circumstances is it necessary to polish a watch? I always believed that some light swirls and scratches add to the provenance of the watch as it ages. Like you said, a polish can do real damage to the value of a watch. If my watch needs to be cleaned, I take dish washer soap and a cotton cloth to remove the accumulated dirt. So when is it necessary to ever polish a watch?

Great video, great points! 👏🏼

Thank you Danny …this video help a lot.

@happyjewelers

Жыл бұрын

Glad it helped!

Great tips!

Excellent informative video.👍

Awesome review! I totally concur 😄✌️

Thank you! very informative

@happyjewelers

Жыл бұрын

Glad it was helpful!

Wear your watch. Don’t worry about scratches

I’ve been laying my watched flat forever. 🤦🏻‍♂️ Such a great tip. I never realized it was wrong. Thanks.

Awesome Video

Nice tips!

Really enjoy your videos and the producer Micheal episodes

Great video gear info😀👍👍look foward to all your videos 👍👍😀😀

@happyjewelers

Жыл бұрын

Glad you like them!

Hey! Do u design /manufacture Custom jewellery?

SOS pads are great for removing dirt

Congratulations to happy jewelers. You guys are like taking over the Internet absolutely your first stop if you’re buying a watch.

I see watches on Moda that are completely polished where they used to be brushed. Saw an OP41 recently with fully polished lugs on auction. People blindly bidding on junk

Could we get a video on how to properly clean your watch at home?

Don't automatic watches have built-in "tech" to prevent over-winding? I think they do. Otherwise they'd overwind with regular wear. But still, there's no need to to more than 30turns. I usually just wind until they start moving and then do 15. Even on my manual winders, 15-20 is enough for the whole day.

What about watch winder ? Is good or bad on daily basis for watches and can it overwind a watch ?

@happyjewelers

Жыл бұрын

Watch winders are a very tricky subject. We personally are okay with using watch winders for watches that are not worn daily.

Tips from a Pro 👍

i have a question - i have a platinum daytona 2021 non baguette version. Its fully factory stickered with the barcode and i dont want to wear it because im scared the stickers coming off would make it take a hit in value. I have an eye of the tiger in the same condition. What do you recommend i do especially since i bought them as investments? if i do wear them and the stickers come off how much of a hit would it take?

@MyWatchLLC

Жыл бұрын

Expect a 20-30% hit if you wear them. Which I think you should

@crazymike401

Жыл бұрын

If you bought purely ad investment. Put in safe and never wear. Instant value loss

What cloths are you talking about that screw up polishing? Regular micro fibre??

@happyjewelers

Жыл бұрын

Micro fiber clothes should be fine, but we are mainly talking about over polishing your watch with brute force. For the best results, we always recommend just coming in and we will help you out.

Personally I would not wear an expensive watch while swimming or taking showers even divers with high water resistance. For me water and metal are not exactly good for each other.

Can you actually overwind a modern Rolex?

Changing the date too late at night/early morning

show Omega watches !!

i just polished my watch, and you start your video like this😭

How do you avoid buying fakes when box and papers are not available ? GMT´s are perfectly cloned, even the inside are indentical..

@MyWatchLLC

Жыл бұрын

BUY THE SELLER! Someone with lots of good reviews. No they are NOT the same on the inside, it’s very obvious to an experienced watch dealer when there’s a fake. I can show you side by side pictures and show you 100 differences. And I’m talking the best clones $800 from China.

WHAT ARE YOU SAYING!!!! You can NOT over wind a Rolex, there’s a mechanism in there that STOPS the watch from being over wound.

I have a Rolex Sub that i plan on getting serviced in the near future. I have taken out very very minor scratches with a polishing cloth. Never going crazy. The watch is near perfect !! Does a Rolex service include polishing ? I feel mine does not need it .Should i tell them that upfront? Great video !!👍 I plan on visiting Happy Jewelers someday ! 😁

@happyjewelers

Жыл бұрын

Rolex will automatically include it and charge you for it. However, if you wish to opt out; make sure to let them know in advance.

@doug2078

Жыл бұрын

@@happyjewelers Thanks for the Info ! Very Much Appreciated !!👍

Great video but at the end of the day a sub is a tool watch. You shouldn't be buying one if you're going to freak out every time you put it down.

Ive never wind a auto watch , just give it a gentle shake . Then wear it , never had any issues

Over winding a watch.🤣

Never lay the watch on the crown either

@happyjewelers

Жыл бұрын

A solid tip. 👍🏼

You can get protective stickers for your bracelet to stop the scratching im pretty sure

Wow you really don't know that you can't overwind nearly all modern automatic watches? As a professional watch dealer?

Polishing is a terrible idea. I wouldn’t even give my car to someone to polish the paint. You really need to do your research who is qualified.

someone filmed this video with a potato ??

Never buy a watch at a over priced rate 👍🤔 fake price 👍