NEED More Space? Upgrade Your iPhone To 256GB. Full Step by Step. JC V1S Pro w/ BGA315 Module
▶Tools from this video◀
JC V1S Pro + NAND Adapaters: www.diyfixtool.com/products/j...
iPhone 14 Reballing Stencil: www.diyfixtool.com/products/m...
Here's how to get more space in your iPhone by upgrading the soldered on storage NAND chip.
▶Need to upgrade your iPhone? Request a quote: www.vccboardrepairs.com/conta...
This iPhone 14 Pro Max had full storage with 126GB of 128GB. Less than 2GB of free space. So we go through the process of replacing the NAND, that we sourced from an iPhone 14.
Turns out, iPhone 14/14 Plus NAND does NOT work with iPhone 14 Pro Max.
So I had to use an iPhone 14 Pro donor board to source the 256GB replacement NAND.
I go through the full process of pulling the NAND, cleaning the underfill, reballing the NAND, wicking the board, using the JC V1S Pro programmer & the BGA315 adapter for iPhone 14 series & more.
Here’s a full list of my solder tools: www.vccboardrepairs.com/gear
▶Subscribe for more phone repair tool reviews & tutorials: kzread.info...
▶Need to recover your data? Request a quote: www.vccboardrepairs.com/conta...
▶Useful Links◀
Crowdsourced repair solutions: repair.wiki/w/Repair_Wiki
Join my Locals Community: vccboardrepairs.com/locals-co...
30 Day Microsoldering Starter Course: vccboardrepairs.com/solder-co...
90 Day Advanced Solder Course: vccboardrepairs.com/90-day-co...
Buy a shirt: merch.vccboardrepairs.com
▶Phone Repair Videos◀
Microsoldering Repair Videos: • How To Fix iPhone 13 w...
Data Recovery Tutorials: • Where To Copy Your iTu...
Phone Repair Tool Reviews: • LIVE! iPhone 6S Plus O...
▶Best Thermal Cam Setup◀
Seek Compact Pro: amzn.to/34I4whX
Seek Stand: vccboardrepairs.com/buy-seek-...
Seek Macro Lens: www.vccboardrepairs.com/buy-m...
▶Social Media◀
Facebook Group: vccboardrepairs.com/vcc-fb-group
Facebook Page: / vccboardrepairs
Instagram: / vcc_board_repairs
TikTok: / vcc_board_repairs
▶About VCC Board Repairs◀
We are a Las Vegas, NV based repair shop who offers mail in repair services for microsoldering repairs & data recovery. Our specialty is iPhone, iPad, Samsung and other mobile devices. We also offer B2B pricing for repair shops. Contact us today for a quote: www.vccboardrepairs.com/conta...
▶Affiliate Note◀
This page contains affiliate links. If you choose to make a purchase after clicking a link, I may receive a commission at no additional cost to you. Thank you for your support!
Пікірлер: 74
Buy the JC V1S Pro + NAND Adapters here: www.diyfixtool.com/products/jcid-v1s-pro-programmer-bga315-bga110-bga70-for-iphone-ipad?ref=vccbr&variant=43763953860837 iPhone 14 Reballing Stencil: www.diyfixtool.com/products/maant-0-12mm-square-hole-bga-reballing-stencil-for-iphone-6-14-pm?_pos=12&_sid=59afba2e8&_ss=r&ref=vccbr&variant=44056716574949
@orlandpinol1222
11 ай бұрын
for upgrading storage or replacing Nand on 14 serries are no need to reard and write datas on it/ is it directly replace nand?
Great work jesse and really enjoyed watching. Love that trick with the kapton tape , taping the sandwich together to stop it separating. Definitely going to be using that from now on. Great watch Jesse as always.
@VCCBoardRepairs
11 ай бұрын
Glad you enjoyed it
Great video 🔥🔥🔥
@VCCBoardRepairs
11 ай бұрын
Thank you!
Hi sir please give the buying link for the gloves you using
I just bought JC V1S Pro. Thanks for inspiration in many ways :) I have alreay success with some iPhone 7 memory upgrade, and some X/Xs 64GB swap for training :D BGA 315 is challenge. I need to be sure in really safe nand desoldering process.
@VCCBoardRepairs
5 ай бұрын
Great to hear!
Very useful. Thanks. Perfect job 👏.
@VCCBoardRepairs
11 ай бұрын
Glad it was helpful!
I try to iphone13, is this also success? With 3u tools. If you have a experience. Please share ^^ thanks
Nice🎉🎉
Thank bro
@VCCBoardRepairs
7 ай бұрын
You're welcome!
It seems like a very difficult task. Your skills are amazing. I have a question. I'm using an 11 pro max 256g. If I installed the 11 pro max 512g NAND flash normally, would it be possible to complete the task with just the flash function of 3utools? Is there no need for a difficult task using v1s pro? thanks!!
@VCCBoardRepairs
3 ай бұрын
No you need to program it
I wanted to do.
There is also possibility that you didn’t install the nand properly first time. Or the nand was corrupted. Will see in the future if it is as you said. Good job done 👍
@VCCBoardRepairs
11 ай бұрын
Yes, I thought it was maybe bad install or bad NAND. But the fact the programmer read what it's bound to, that's what makes me believe it's just not compatible. I had this issue with the 12 series as well. I guess time will tell
@vojtechvecera8462
5 ай бұрын
@@VCCBoardRepairs I'm curious about this. I am most interested in whether the problem is directly in the NAND model or it is about which phone the NAND was formatted in first. I think that if formatting to a truly factory state worked, it would work. If it even possible by HW. There can be some restricted area for formatting.
Yeah V1S Pro definitely needs a few more updates. You can’t format NANDS AT ALL when connected to online mode via PC software. You can’t connect a device for READ PHONE feature either in JCRepair software (with dongle cable connected to the side of V1S Pro). BTW love the video ❤.
@VCCBoardRepairs
11 ай бұрын
I haven't needed to use it much, but good to know all the limitation you mentioned!
@ceejay_gaming9636
11 ай бұрын
Why the hell did they even release an unfinished product ? This is so not cool to pay full price for your tool and get half assed features
@iTechBoardRepairs
11 ай бұрын
@@ceejay_gaming9636 Being a device that connects via Wifi I’m sure new updates will be pushed out constantly.
Hey Jesse just out of interest does the international version pick up 5g in the US?
@VCCBoardRepairs
10 ай бұрын
Yes it does
Is it possible to use the i2c p14 pro programmer instead of the jc v1s pro with bga 315 module
@VCCBoardRepairs
11 ай бұрын
Yes. But you don't need a programmer at all for this job. Just replace it Programmer is only to read capacity right now
Hi! Thanks you for your share. I’d like to know how can you enter the DFU mode? My 3utools not connect to my iphone.
@naresh9970
Ай бұрын
Use power and vol down key
I have a question. What if I buy a higher capacity NAND and try to use it after programming the chip? Will it work?
@VCCBoardRepairs
8 ай бұрын
for 12 and newer, it has to be a NAND specifically for the model you're working. Cant' really mix and match
This reminds me of the good old days JC Tools have never worked right always have to wait for software updates to fix their stuff .. by the way you forgot to cover up the IMEI 1:05:11
@VCCBoardRepairs
11 ай бұрын
Thanks for letting everyone know 😅
@QsTechService1
11 ай бұрын
@VCC Board Repairs - Jesse Cruz You're welcome jesse have a good one 👍
@JC: time: 49:20, on maiboard second pad (counting from left) is BLACK, that was a problem
@VCCBoardRepairs
11 ай бұрын
There's no pad there. Check ZXW 😅
Hello friend, how does the memory IC work without transferring the old IC information?
@VCCBoardRepairs
8 ай бұрын
SYSCFG data is in CPU now since the iPhone 12. So no need to program anymore
@RepairArt
8 ай бұрын
@@VCCBoardRepairs Thank you very much for the valuable information and the most wonderful work
Hello bro I have the same problem in 14 pro max , so I have use cnc to get the 128gb off when I have put the 512gb nand from 14 pro max doner board but problem no take software I have change another nand same thing I have to format nand with v1spro or not ?
@VCCBoardRepairs
9 ай бұрын
It should work. Otherwise you have damaged nand or bad install
Helloo Brother,is it only iPhone 14 series not must to program??
@VCCBoardRepairs
11 ай бұрын
12 and newer does not need programmer
@al-watanbhai5097
11 ай бұрын
Thanks brother stay blessed
my iphone 12 pro max ios 17.4 shows ay a108 tool phone tab but shows not connected when i hit read in repair tab ...any ideas
@VCCBoardRepairs
2 ай бұрын
Disconnect and reconnect phone
You put 256GB Hynix replacing the 128GB Kioxia/Toshiba NAND, but 1:05:14 says it's 256GB Toshiba?
@VCCBoardRepairs
11 ай бұрын
Did you watch the full video?
@borisdg
11 ай бұрын
@@VCCBoardRepairs To be honest, I was skipping a lot :D
@VCCBoardRepairs
11 ай бұрын
Then you missed the part where I explained why I used a different NAND 😅
@borisdg
11 ай бұрын
@@VCCBoardRepairs Well I'm gonna watch it again :D
can the donor board be iCloud locked ?
@VCCBoardRepairs
7 ай бұрын
Yes
Is this device better than the P14?
@VCCBoardRepairs
2 ай бұрын
I think so. I had a few NAND not work with i2C P14 that worked on JC V1S Pro
I wonder is upgrading a phone to more than possible could be a thing Or Maybe taking a NAND from a chinese variant phone, eg Redmi Note 12 Turbo , and puting it inside a global variant phone eg Poco F5 This way you get maxed out storage and best connectivity
@VCCBoardRepairs
8 ай бұрын
For Androids, it's a different process.
Which fume extractor do you use?
@VCCBoardRepairs
8 ай бұрын
DIY setup. I have it linked on my site Www.vccboardrepairs.com/gear
@MacGamingPlace
8 ай бұрын
I see 8 parts on your website for fume extracting. Do you need all 8 parts for it to work?
These resistors are clone resistors bcz 1 tb nand is much bigger in size so if you want to put 1 tb nand you can remove these resistors
@VCCBoardRepairs
2 ай бұрын
Ok great
The phone support up to 1 TB, with all hard work to do, i will go for 1 TB instead
@VCCBoardRepairs
11 ай бұрын
Find me a 1TB NAND at a good price 😅
How many will spend time to perform this teardown? better buy 256gb iphone than taking this risk
@VCCBoardRepairs
11 ай бұрын
usually it only takes about 1hr. and sometimes, people buy phones with lower storage & don't realize it's not enough space. so some would prefer to just upgrade the storage than trying to sell their existing phone then deal with buying another one with bigger storage, which can possibly have other problems or non-original parts, etc. there are some scenarios where an upgrade makes sense, which I discuss in the video as well
@59:56 It Really Whips the Llama's Ass
@VCCBoardRepairs
11 ай бұрын
haha what?
@gergelysoki1705
11 ай бұрын
@@VCCBoardRepairs look at the log. "WinAMPRestore." Winamp, the mp3 player. Get it? It´s funny.
Wattsapp grup creat bro ❤️
@VCCBoardRepairs
10 ай бұрын
For free?