IP phone line will not be trunk port. U can add it in any vlan for data traffic as well as can enable voice vlan for voice traffic on the same port. Both services will work separately.

Thanks nice video ❤

Sir apne ye start karke bahut achha kiya. An tak Hindi me networking ki itni brief video nahi bani thi. Thanks

THANK FOR INFORMATION.... NICE

thanks a lot. very well explained

Sir, how bendwitdh distributed on unmanag(10/100) or managable-gig switch

The switch port connected with ipPhone will work on voice mode and access mode both. But according to the scenario as in video the port should be set into trunk.

In today's network every user want IP extension, then according to you every port of switch should be configured as trunk, Is it really feasible in real life production Network ?

i m l learning new things by grace youre you sir

Online CCNA certification course Ngnetworks , networksbull and network kings practical par achha hoga kya

Please advise how to configure Digisol Ds Gs1528 managed switch .

So Nice!!

In this video.. There is a HUB between 2 manageable switches.. Now my question is how the tagged data will pass through this HUB? How the other end switch will recognize the Vlan Information that is sent through HUB.??

sir, when we configure port as a trunk, then how computer can communicate with switch directly,because computer can communicate with switch through access mode.and in the above scenrio,there are 2 devices attached with switch,both devices are connected through trunk port.totally non-understandable ..can you please guide through configuration.thanks

Vlan concept to samajh aaya sir but 3 different Vlan waale PCs and Phone ko ham firwal se IP kaise denge, kya iske liye firewall main different port configure karne padenge ya fir ek hi port se different IP mil sakte hain - This is reall problem im facing

Very good video

Dear Attique from Saudia I 've a problem with configuration.Have you some time for me Thanks

Pc & Ip phone will have access mode with switch. Not trunk

sir, we have 2 switches, both of having native VLAN, so without trunk port its possible to talk to each other

@hectorcardenas6616

Жыл бұрын

if both are using native vlan 1 both can talk without configuration best practice the cable that is connecting both switches make sure is tagged "Trunked"

But hub is work on half duplex how can we add

router 5210 ki setting ka btao sir full info os ki

Sir IP phone ko vlan 30 mai dala or phone se connect PC vlan 20 mai hai baat ker sakte hai ? Because ek vlan ke member dusre vlan keep members se baat nai ker sakte

@babayaga9805

5 жыл бұрын

Bhai intervlan routing k liye l3 devices ya router lagta hai ...switches k through using trunks sirf same vlans k members communicate kr sakte hai

Switch configur command PDF send kar dijiye sir

i saw all video of sir

Native vlan kahan pe use karte hai, real time examples batadijiye please

@zafar81883

4 жыл бұрын

Native vlan sent data one switch to another without tagging ..if u have vlan 10 and vlan 20 then first switch will check 10 or 20 tag then it wil send to another switch by trunk and native vlan send data direct to native vlan there is no tagging ..by default native vlan is vlan 1

create a network with l3,l2 switches with vlan on packet tracers reg video

@TechGuruManjit

6 жыл бұрын

Ok and thanks for your support

ports ko tag aur untag kartr hai..kisi port ko ek se zyaada vlan ke liye tag karne ka kya matlab hai?

@babayaga9805

5 жыл бұрын

Ports can be tagged with multiple vlans if you are using voice line as well

Hello

Ple increase ur speed ,u r too slow

Sir native vlan kya hai ye to samajh me Nahi aya

@sibgathassan6281

4 жыл бұрын

chutiya KZreadr ha 😂

Kuch भी samajh nahi aara hai

not teaching properly

ENGLISH!!!!

Bakwas

This is poor style of teaching. Please first have some teaching training then make videos; it'll help everyone. Where are the configurations?