NAO Shop Truck Project: It's Done! 1967 Land Rover Series IIA 109 Military
The NAO shop truck project is complete!
Жүктеу.....
Пікірлер: 30
@David-lb4teАй бұрын
Good to see another 109 on the road. Keep 'em driving.
@NotFadeAway Жыл бұрын
One of my all-time favorite trucks you guys have done. I wish I had gotten by it. Some lucky fella out there did I hope he’s enjoying it.
@waynedoeblin68012 жыл бұрын
Another great video,and project,I love your enthusiasm about everything you do here,keep up the good work,Cheers from Australia 🙂
@TheRetroSeries2a2 жыл бұрын
really enjoyed this build. I'm doing the same truck! 68 109 ex military, and its just getting a bit of a refresh, brush painting and a tidy up!
@islandblacksmith Жыл бұрын
lovely!
@tommaples91742 жыл бұрын
I love rigs like this, good looking and hard working 👍
@jeromebyrd78312 жыл бұрын
Beautiful!
@tommychristopher1222 жыл бұрын
Great video. I’m partial to the older vehicles with a little wear, but actually get used. Enjoy it! Thank you.
@samueljohnclark11 ай бұрын
Nice resto to me😄😊
@the_lost_navigatorАй бұрын
An old FFR! Kudos on your Resto, eh.
@123654789Eduardo2 жыл бұрын
Espetácular!! TOP 👏👏👏👍
@darrelbautista90382 жыл бұрын
Great 😊👍🏼
@checkpointcharlie17882 жыл бұрын
You should build your WW I tank idea! I bet you could.
@malcolmrodwell54582 жыл бұрын
The 375 gearing you're talking about. Is that the Ashcroft high ratio transfer box modification? Or have you fitted some different ratio diffs? Looks like a great truck to have around and I love how solid and fresh the drivetrain is under the "disguise" of the faded panels
@scienceaddict772 жыл бұрын
Why didn't you guys keep it RHD?
@rickz94952 жыл бұрын
Rough body panels? You should see my 88 lol. Lovely build! Is it posible to get more info on the fuel injection setup? Very intresting stuff.
@HeinerStorch2 жыл бұрын
Hi, great vid and restoration job well done. I would appreciate some further détails on the (greater, round) socket on the back, please. Perhaps in additional vid. Have you ever checked the engine revs, while going 60mlsh with the 3.75 diffs? I like the Fairy OD on my 109 S3 (ex-mod, ex-FFR, ex-4cyl petrol), but got the feeling, that the rev's could be lower (now with 200TDi), even with OD in and 235/85-16 ( but 4.11 diff-ratio). Regards Heinz
@kevenkullberg99552 жыл бұрын
I’m restoring my 61 lla 88 over in Az. that I’ve had for 43 years, you said you installed 3.75 gears what is the top speed? At a comfortable RPM? Thanks Keven Kullberg
@jakob38562 жыл бұрын
Love the truck but unrelated question: is it straightforward to fit half doors to Defender with conversion kit? Also for the rear to create half swing away if you’ve done it? Thanks for your help!
@jakecrowley62962 жыл бұрын
Love the truck! Does it still have the original trans with no synchro on 2nd gear or did you convert it to the all synchro one? Also I you should post a youtube video of you plowing with it!
@jeromebyrd78312 жыл бұрын
How much would you sell something like this for?
@Anderzander2 жыл бұрын
Looks lovely. Good job 👍🏻 Question - have you got the bonnet fasteners on the right way round ? On the series one’s the sprung part is on the wings with the clips on the bonnet.
@clooperman3745
2 жыл бұрын
On a 109" FFR l had the bonnet clips were the same as this.
@Anderzander
2 жыл бұрын
@@clooperman3745 ahh - thanks 🙏🏻
@toddhulen774010 ай бұрын
How can you be sure you have a 1967 2a 109 sir?
@mikesandone2652
10 ай бұрын
You can get the heritage certificate and it will tell you the exact build date
@icba49072 жыл бұрын
Put the bumper over riders back on.
@mikesandone2652
2 жыл бұрын
Yes I will! I just need to cut off those recovery points on the top of the bumper. They are cleaned up and ready to go on.
@merykjenkins3274 Жыл бұрын
I think it's interesting that you personally prefer a vehicle that proudly shows its history rather than the concourse reproductions that you roll out for your customers. My belief is that you would sell twice as many if this was your product.
Пікірлер: 30
Good to see another 109 on the road. Keep 'em driving.
One of my all-time favorite trucks you guys have done. I wish I had gotten by it. Some lucky fella out there did I hope he’s enjoying it.
Another great video,and project,I love your enthusiasm about everything you do here,keep up the good work,Cheers from Australia 🙂
really enjoyed this build. I'm doing the same truck! 68 109 ex military, and its just getting a bit of a refresh, brush painting and a tidy up!
lovely!
I love rigs like this, good looking and hard working 👍
Beautiful!
Great video. I’m partial to the older vehicles with a little wear, but actually get used. Enjoy it! Thank you.
Nice resto to me😄😊
An old FFR! Kudos on your Resto, eh.
Espetácular!! TOP 👏👏👏👍
Great 😊👍🏼
You should build your WW I tank idea! I bet you could.
The 375 gearing you're talking about. Is that the Ashcroft high ratio transfer box modification? Or have you fitted some different ratio diffs? Looks like a great truck to have around and I love how solid and fresh the drivetrain is under the "disguise" of the faded panels
Why didn't you guys keep it RHD?
Rough body panels? You should see my 88 lol. Lovely build! Is it posible to get more info on the fuel injection setup? Very intresting stuff.
Hi, great vid and restoration job well done. I would appreciate some further détails on the (greater, round) socket on the back, please. Perhaps in additional vid. Have you ever checked the engine revs, while going 60mlsh with the 3.75 diffs? I like the Fairy OD on my 109 S3 (ex-mod, ex-FFR, ex-4cyl petrol), but got the feeling, that the rev's could be lower (now with 200TDi), even with OD in and 235/85-16 ( but 4.11 diff-ratio). Regards Heinz
I’m restoring my 61 lla 88 over in Az. that I’ve had for 43 years, you said you installed 3.75 gears what is the top speed? At a comfortable RPM? Thanks Keven Kullberg
Love the truck but unrelated question: is it straightforward to fit half doors to Defender with conversion kit? Also for the rear to create half swing away if you’ve done it? Thanks for your help!
Love the truck! Does it still have the original trans with no synchro on 2nd gear or did you convert it to the all synchro one? Also I you should post a youtube video of you plowing with it!
How much would you sell something like this for?
Looks lovely. Good job 👍🏻 Question - have you got the bonnet fasteners on the right way round ? On the series one’s the sprung part is on the wings with the clips on the bonnet.
@clooperman3745
2 жыл бұрын
On a 109" FFR l had the bonnet clips were the same as this.
@Anderzander
2 жыл бұрын
@@clooperman3745 ahh - thanks 🙏🏻
How can you be sure you have a 1967 2a 109 sir?
@mikesandone2652
10 ай бұрын
You can get the heritage certificate and it will tell you the exact build date
Put the bumper over riders back on.
@mikesandone2652
2 жыл бұрын
Yes I will! I just need to cut off those recovery points on the top of the bumper. They are cleaned up and ready to go on.
I think it's interesting that you personally prefer a vehicle that proudly shows its history rather than the concourse reproductions that you roll out for your customers. My belief is that you would sell twice as many if this was your product.
Can you help me buy a car like it? I'm from Libya