I can get Nanrobot from a dealer called Roadrunner Scooters. They offer extended warranties up to 3 years. Whatcha think of getting the extended warranty? Does this shut down affect the LS7+?

I just watched you’re most recent video. I have an idea. Set your p setting to cut out at 52.1. Fully charge it. Run it till it cuts out. And recharge. Then change your p setting back to 43. See if that works bro. Lol 🤞🏻

@karlbryanlorzano1206

3 ай бұрын

how do you set the settings to P?

Yea it's the throttle o just got the d6 2.0 so if you pull the throttle all the way down mines shut off but if I hold the throttle close to all the way down it don't shut off

Maybe try and unlplugg the battery's inside the scooter and plug them back in. On the nanrobot KZread page they show to do that when battery drops voltage. Maybe this will help you. I so hope you get this figured out!!!

@ItsMallie

2 жыл бұрын

Yeah In My Last Video Before This One I Tried That And Went For A Test Ride And It Still Cut Off Sadly

@walterwhite1

Жыл бұрын

@@ItsMallie Chinese 🇨🇳 0:45 made junk man .. this company scammed me out of $1,600

@brandongardnerman123

Жыл бұрын

​@@ItsMallie Bms bypass

@grazz7865

10 ай бұрын

@@brandongardnerman123thermal runaway

Me i got deferent thing all working good on kugoo m4 battery test show me normal voltage 54.6 on voltmeter screen show less 54.0 and sometimes 53.9 i don't know even if that's normal

@ItsMallie

10 ай бұрын

your scooter is a "48" volt when in reality 48 volts fully charged is 54 volts so thats normal. how it works is your battery is probably a lithium ion battery pack If you where to open your battery pack you would find multiple cells and each individual cell fully charged is 4.2v and the nominal is 3.6v A lot of company's and people like to calculate battery voltage by the nominal because they say to count it by its fully charged volt is confusing... idk why it would be confusing but yeah. So once again thats normal for your scooter.

I have the exact same issue with my Joyor scooter. 6 months ago it started cutting uphill because the battery voltage was dropping waaay too much. As the months went on it got worse to the point where the battery cuts when I touch the throttle. Even when charged fully, the voltage sag just instantly kills it. I want to replace the battery, but I feel like it's not worth it cause it's the same chinese battery that will start cutting out again and again after a year and a half. I just want a scooter like a Zero, Vsett or Dualtron that slows down when low on battery, instead of cutting off prematurely.

@ItsMallie

2 жыл бұрын

Yeah These Cheap Battery's Aren't Very Reliable And Don't Seem To Last To Much Longer That A Year. My Project Flash An 3000W Moped I Built Back In 2020-2021 Battery Is Also Doing The Same Thing And Its Extremely Annoying Because The Battery Cost 700$ But Was Still Considered Cheap Simply Because Of Lower Quality Cells.

@grazz7865

Жыл бұрын

There’s another video on this to “wake” the battery by disconnecting the battery then reconnecting the battery. Sort of like a reboot. Other possibility is the controller is bad.

Is this a fluke with your scooter. I want to get one of these but hearing of the shut offs----mak ed s me concerned over getting one of tf these. How about the LS7+? Is that model plagued with shut offs? I can get from a dealer that offers an extended warranty. I may spend the extra geets up front to cover the battery and everything else. Is is known what the cause is???? Motors, controllers??? Over heat, any logic circuits off spec or bad design tolerance?

@ItsMallie

2 жыл бұрын

Mines Shuts Off Because I Have A Bad Cell In The Battery So Its A Battery Issue. With The Ls7 idk If That Has Problems I Haven't Looked At Any Electric Scooters In A While So Ill Have To Do Some Research.

@mrkevin6354

2 жыл бұрын

@@ItsMallie thank you. Any input is appreciated. I may get one just with the extended warranty to cover any issues

@walterwhite1

Жыл бұрын

Don’t ever buy this Chinese made pile of junk

@grazz7865

Жыл бұрын

I got the lightning. Doesn’t seem to have any battery issues.

Does a error code show up on the display when it shuts off?

@ItsMallie

Жыл бұрын

yes but i never read it fast enough lol

Is it something that just started happening? Or have you been driving it a while

@ItsMallie

2 жыл бұрын

It Started About A Month Ago But Ive Had This Scooter Since august 12th 2020

@justinalbritton9685

2 жыл бұрын

I shared your video with roadrunner , and they said probably blew a transistor ..the same issue with mine , I’ll update when I install the controllers to see if that does it

@inegma29

26 күн бұрын

​@@justinalbritton9685 did you fix it? Mine cut off for the first time today but I've had mine for years. No battery voltage indication after it cut out. Waited 30mins still no battery or any lights of any kind.

I had the same issue it started @ 48volts cut off now it’s been doin it around 52volts.

@ItsMallie

2 жыл бұрын

Yeah I Think It Mean You Have Unbalanced Cells Which Means You Have To Get A Whole New Battery

@deetee7522

2 жыл бұрын

@@ItsMallie thanks! Finally RoadRunnersupport decided to send me a new battery but i had to pay for S/H, not a problem…as long as my D6+ would fix this cut off issue. Chatting with them about this issue for a week well worth it. i told em what you had told me about the problem. thanks again! And thanks for all the peeps made comments down below. Peace!

@ItsMallie

2 жыл бұрын

@@deetee7522 Ayy! No Problem And Im Glad I Could Help.

Just dont plug anything into the usb port something similar happens until you unplug whatever you have plugged into the usb port at the throttle.

Damn I’m buying a D6+ today so hopefully no issues

@ItsMallie

2 жыл бұрын

It Took Mine A Year But You Might Be Good because You Shouldn't Be Getting A First Gen

@mrkevin6354

2 жыл бұрын

@glen davis......how is your D6+ doing?

@grazz7865

Жыл бұрын

I have the lightning and no issues. Check your P settings for the battery cut off voltage

@MaddBatReivews

Жыл бұрын

@@grazz7865 how

@grazz7865

Жыл бұрын

@@MaddBatReivewscheck the owners manual for the section marked “P settings “. Scroll to the P settings for voltage cut off. Set the value to 42

Some kind of problem. Out in woods, hit the turbo button and DEAD. I know it's not the battery, I had a replacement especially built. Charging to an ebike, at least I can ride it back instead of pushing it 2 miles. Looonnng.

Did you ever figure out the issue with the battery? I had the same problem. Its the BMS more than likely. Send me a PM and I can explain it and the fix.

@ItsMallie

2 жыл бұрын

Im pretty sure its a bad cell i just don't have the money right now to get a new battery. On there website they don't sell just the battery anymore so ima have to find it some where else

I have a nanrobot D6+, it cuts off @ 48v. It happened to me a few times. Hopefully nanrobot could solve this problem.

@brandongardnerman123

Жыл бұрын

Bms bypass

@grazz7865

10 ай бұрын

@@brandongardnerman123bad idea. That’s how they develop thermal runaway and fire.

same problem.

You have bad battery, bro open battery up and replace the one that looks bad theres like a 130 batteries into only 1 bad one will mess it up buy a vaping battery 18650 replace solder back on or spot welder.

What Should I Do With This Scooter? 🤔

@romanpryce3999

2 жыл бұрын

Well, you could sell it and use the money to fund another project. Might be nice as to convert it to a go cart with 2 independently driven rear wheels, front wheel drive may be have too much torque steer. But if I had it I just ballance the battery and ride it. Was going to buy a D6+ last year but my D5+ 2.0 was too young. Now they have the new LS7+ I want that even though scooting is illegal here in England. I'm from Chicago but live in the UK, otherwise I would probably make you an offer. Be careful with the re-ballance charging as NanRobot doesn't want people to do it as there may be a risk of fire! So you probably want to do it in a safe space outside if possible or at least away from anything in a well ventilated area. In any case be very careful. That scooter that is charging to 59 volt may be overcharging a cell, 4.2 * 14 = 58.8. Max safe cell voltage is 4.2 per cell or cell bank and there are 14 cell banks in series to make 58.8 volts. It could also be a bad sensor reporting too high. Your D6+ charging to 58.2 indicates an un-ballanced pack, one cell is going above 4.2 before the others and then when you ride those other under-charged cells or cell are going too low under load, maybe 3.3 volts or something that's when the BMS stops the show. Have fun!

same prolem.

I've read that the d6+ battery is of mediocre quality.

@ItsMallie

2 жыл бұрын

Yeah These Cheap 18650 Batteries Are Not Reliable And Dont Last Long

It’s your battery that’s shot

@ItsMallie

3 ай бұрын

Yeah i found that after words. sold the scooter about 6 months ago finally

So it’s not the controllers , I replaced the front and rear controllers, took it for a ride and it cut off again

@ItsMallie

2 жыл бұрын

Damn. so your telling me not even nanrobot knows what to do?

@justinalbritton9685

2 жыл бұрын

Uhh the first tech guy told me he thought it was the battery , but his superior thought it was the controllers. So they sent me the controllers, may be the battery after all. I’m waiting for customer service to respond and see about shipping me the battery or a refund .

@justinalbritton9685

2 жыл бұрын

And also mine is dead at 55 volts .

my D6 Max speed 115 mph.

Nanrobot sent me the battery , haven’t had any problems since I replaced it. So looks like you need a battery

@ItsMallie

2 жыл бұрын

Hmm. well thats still leaves me having to decide what to do with this scooter because im sure there not gonna send me a battery since ive had this scooter over a year now and i dont have 600 to spend at the moment.

BTW …your pinky nail is due for a trim 😳 that’s just gross

@ItsMallie

3 ай бұрын

nah

My nanrobot cuts off at 62 volts, and has a new battery.its set to cut off at 43 volts.don’t ride it much and has been in the shop 3 times.piece of crap and unreliable

Chinese made junk. Mine is now completely broken no longer even turns on

@ItsMallie

Жыл бұрын

Damn. I plan on finally opening mines soon to see whats wrong but the components in these nanrobots explain why they are so cheap

@grazz7865

Жыл бұрын

You can’t leave these batteries sitting too long. Lithium batteries usually cannot recover from a complete discharge.