Always remember lefty loosy righty tighty when taking on n off bolts.And that was smart to loosen the screws on the hub motor before using the drill. Drill can strip the bolts. Good job!

Such a great video, just what I was after. Thanks!

If you're taking things like this apart it can help to mark items using chalk, regular blackboard chalk, so as to avoid confusion later. Helps as you get older and doesn't add to theworkload.

Good video and great explanation.

Thanks man

muchas gracias,i need it this video great

Çok teşekkür ederim bende nasilmsokecemmdiye düşünüyordum çok yardımcı oldun bro

👍

Nice video... Would have Liked to know what size box you used to unscrew your wheel nuts ?

@ItsMallie

3 жыл бұрын

Used a 13/16 Socket

@Carcajoo121

3 жыл бұрын

@@ItsMallie i finally used a 21 mm , thanks

@ItsMallie

3 жыл бұрын

@@Carcajoo121 NP

A little bit of copper grease on the threads next time. It will make it so much easier to undo the bolts.

For street tires did you use 10x2.5 front and back or 10x2.5 front and 10x3.0 rear?

@ItsMallie

3 жыл бұрын

in this video i had both 10x2.5 but now i have a 10x2.5 in the front and a 3.0 in the back but i recommend you just get both 2.5 because 3 isn't any different since the rim is just going to squeeze it

Just changed both inner tubes and tires on my D6+, now I have a balancing issue the wheels seem to wobble and cause a vibration at speeds above 30, I've put some weights on there and its fixed it a bit but not too bad, did you encounter this issue?

@ItsMallie

2 жыл бұрын

Nah when i put my tires on there will smooth. i thought tires would only wobble or rumble if there where sitting on your scooter for to long and the tires at the bottom become a little flat or unbalanced.

@chad6243

2 жыл бұрын

@@ItsMallie Yeah some other people have told me the same, don't know why mine did it but I've sort of made it better with the weights.

It wasn't long .. great video

@afrobooty4641

3 жыл бұрын

What's up man been watching your scooter vids, after tons of research it was this of the kaab warrior. After watching your vids and many others I'm ordering me a d6 today. I had a question on which website you bought yours from and how long did you wait. Thanx great vids

@afrobooty4641

3 жыл бұрын

Couldn't wait man just ordered mine from roadrunner scooter, should be here in a couple days!

@ItsMallie

3 жыл бұрын

@@afrobooty4641 Damn Lol i just came from outside but i got mine directly off the nanrobot website and it took about a week to get to me

@gregoryburkhead7813

3 жыл бұрын

@@ItsMallie is it better than what it seems

@ItsMallie

3 жыл бұрын

@@gregoryburkhead7813 If Your Talking About The Scooter Its Amazing In My Opinion No Cons Honestly Ive Had No Problems No Errors I Its About 3 -5 MPH Faster Than What They Claim Which I Like And Its Mileage Is Insane And Those Are Two Things I Care About The Most Because I Think Of This As My Car/Motorcycle

Is it normal that my offroad original new tires on the new nanrobot d6+ are installed not in the direction of the arrow? Guy in the store claim that they coming from the factory installed this way but it is hard for me to understand this

@ItsMallie

3 жыл бұрын

i think its only for the tread on the tires so im not sure if there will be much of a difference and they come like that from the factory i was all good when i had them on

On the 6th screw the scooter tool stripped the bolt any ideas how to get it out?

@ItsMallie

2 жыл бұрын

One of My Screws Are Kind of Stripped So I Used Torx Bit To Get It Out But If Yours Is Badly Stripped The I Don't Know

Hi i unscrewed all six bolts and the motor still won’t come off like yours did what am i doing wrong i followed all your instructions

@ItsMallie

3 жыл бұрын

the last time i removed the bolts and it wouldn't come off is because there was alot of air in the inner tube causing it to tighten up so you might have to some of the air out

Where did you buy the tires. I want to changes t my nanrobot

@ItsMallie

3 жыл бұрын

www.nanrobot.com/collections/other/products/nanrobot-tires-tubes?lshst=collection

Milk crate stand

Are the street tires less likely to get flats?

@ItsMallie

2 жыл бұрын

Honestly Im Not Sure I Haven't Gotten a flat since i put these on but my brother is always doing burnouts and crazy shit with his scooter and he had to replace the tires so many times so i think it just depends on how ruff you are with this scooter

What size are the road tires??

@ItsMallie

3 жыл бұрын

i think there 10 inch 2.5 inch wide

Yeah but is it worth it? Exchanging solid tire

@ItsMallie

2 жыл бұрын

idk if solid tires are a thing for this scooter but i personally wouldn't recommend them if they are because that will be a terribly rough at the speed this scooter could go

How many miles do the tires last?

@ItsMallie

3 жыл бұрын

Not sure but ive put about 400 miles on the original offroad tires with mainly street use and a very little amount of dirt use and they where still perfectly fine and ive now put about 200-300 miles on these new street tires and there still very good

Don't worry about the carpet. Ha.

Are there tubeless tires for the nanrobot d6+...?? Please someone I have seen it done before

@ItsMallie

Жыл бұрын

I have no clue sadly.

@Chris-Shift4

Жыл бұрын

​@Its Mallie! I heard that you can't put tubless tires on split rims because it will go flat from a few youtubers and e-scooter shops. Only practical alternative is a solid tire for a split rims at least.. This all because I keep getting snake bite flats from the tubes..

@ItsMallie

Жыл бұрын

@@Chris-Shift4 actually yeah that makes since. i forgot the rims do split so there probably is no proper seal for the air to stay in. The tubes to these scooters a very very thin so getting a flat is a bit to easy

@Chris-Shift4

3 ай бұрын

@@ItsMallie So Do not put a tubeless tire or solid tire on the model scooter from the video. The tubeless tire won't hold air unless you change the motor to single solid rim design (like most scooters).. which is difficult and expensive because of the split rim built with motor design that the scooter currently has. so inconvenient changing the tire tubes all the time because I so heavy the tire tube pops quickly. I have actually changed the screws so that I can use a phillips head with the impact driver. It much faster doing all 12 screws. The solid tire design is also an awful Idea because of how bumpy the ride will be. The traction is also terrible. Above 20mph I felt like the scooter was going to wipe out under me. I would wheel wobble and skid side to side. Not to mention I had to buy longer screws.. the ones that hold the split rims together to accommodate the new tire. I drilled it tight and made sure that the tire was flush and even and after only one ride not only was experiencing a bumpy ride on the normal street. On the very first ride the tire popped off the from the rim. I walked the rest of the block home. :(...KEEP THE TIRE TUBE and make sure tire, tire tube and rim is clean and in good condition on the inside especially. Checking Tire PSI frequently made my tires last months instead of weeks. Maybe lube tire tube a little on the inside.

Can someone tell me what the key number is, please?

@ericksuharja5145

4 ай бұрын

22mm