Nanrobot D5+ 2.0 Speed controller settings, some contradictions and manual typos. electric scooter
Автокөліктер мен көлік құралдары
In this video I go over the settings in the speed controller for the Nanrobot D5+ 2.0.
repair,Electric,wheel,review,motorized scooter,handle bars,bike,repair,fix,scooter repair,scooter review,battery,speed control,wires,fast,miles per hour,mph,controller,helmet,light,led light,led,brakes,abs brakes,horn,bell,maintenance,preventive,maintenance,pm,new,ride,speed,lithium ion battery,scooter tires,rubber,aftermarket parts,nuts,bolt,parts,screw,brake caliper,brake rotor,scooter brakes,how to fix,pros and cons,nanrobot,dualtron,macwheel,gotrax
Пікірлер: 178
Hey man, I hope you're well! These videos are invaluable.
I just want to say thank you and express gratitude. I got my D5+ yesterday. The learning curb has been GREATLY reduced for me, thanks to your informative videos. So far every “curve ball” that my scooter has had , I’ve been able to remedy thanks to your videos/tutorials. So thanks again for sharing your passion with us. P.S. could you possibly to a video on: 1. Eco/turbo and single/dual 2. A more in depth video on proper calibration for accurate speed readings 3. After market accessories you recommend. Seeing as how your videos answered all my questions: You’re my go to guy lol. Thanks again!
Very good explanation !!! Thanks....do another from things u learn from ur scooter
I just opened KZread to search this and this was the first video when I open the app :O
This video has been useful to me so much - I hope your health issues are on the mend now!
@wattsinyours
4 жыл бұрын
Thank you and they are.
Thank you. Bought a ROLLGOOD scooter (based in Manhattan, NY). It didn't come with an instruction manual. The throttle controller in your video is identical to mine. Your video helped me navigate it easily. I reduced my electronic braking (WAS set at 2) And, I'm now able to figure/find my total mileage. Safe riding and now subscribed to your channel. 👊👍✌
@stateofthegoonion6871
2 жыл бұрын
Yea cus they rebrand the chinees scooter and resell it... user manual would have the original name on it
you Sir, fixed my scooter!!! The knowledge is much appreciated.
thank you very much. finally my controller is calibrated.
Hi thank you very much I was having difficulties because mines would cut off at 3 batteries but now I'm going to change it
Very good and straight to the point. I’m still a little surprised that higher-end scooters use such a complicated and non-intuitive controller, while entry-level Xiaomi and Ninebots have coloured and easy to understand displays and settings. I guess these Nanrobot-style controllers can be used on whatever make and model, so some money can be saved here, even though they look like straight from the 80s. The brake settings were most valuable to me as the electronic/motor brake was too strong at 1 and 2, especially if you just ‘tip’ it to slow down a little while descending. Deactivated it now at 0, I don’t ride fast though. Works great now
The power start on my d4+ adds instant torque after I press the throttle but I keep it of and only use it when I want to "take off". My acceleration readings are 0-30 kmh: 2,6 seconds and 0-40kmh: ≈4 seconds. Otherwise, using "normal start", the numbers are almost double. The top power is there but it builds up slowly without the power start allowing much smoother accelerations.
Thank you so much!!!!!! Best video on this subject.
Excellent video many thanks 😊 👍 😎
Hello. I just ordered the D4+. Does the d5 controller settings/instructions u explained apply to the d4+ as well. Thanks so much for ur videos. As another subscriber had noted, u are my go to guy and u are a valuable help to the electric scooter riding community. Keep up the good work my friend.
This was really helpful! I liked, subscribed and shared:)
Great video i learned a lot 💯
Thank you for this insightful video
@wattsinyours
4 жыл бұрын
Your welcome and thank you for watching.
Grand MERCI, j'avais voulu mettre l'horloge à l'heure et comme aucun mode d'emploi, ai fait mauvaise manoeuvre en appuyant sur start et mode en même temps. Moralité trottinette n'avais plus de gaz ! Grace à vos explications j'ai pu remédier à ce problème ! MERCI et BRAVO pour cette vidéo.
@wattsinyours
4 жыл бұрын
Merci pour le commentaire. Bien heureux que cela vous est aider.
@MacHenri
4 жыл бұрын
@@wattsinyours kzread.info/dash/bejne/jIeXxKeel8zQg7g.html
@mikhailvallino6223
4 ай бұрын
Vous en êtes content de la d5 +
Very helpful. You are the MAN!
@wattsinyours
4 жыл бұрын
Glad i was able to help and thank you for the positive comment. Ride safe.
Hey thanks men finally i undertand it now
Thanks for the video!
Thanks for the upload good info
@caingonzalez2720
4 жыл бұрын
What's the extra disc that comes with it a brake pad?
This dude issa lifesaver
Hi, i have a Yume D5, the same scooter....but my top speed is 55km/h. What’s your P0-P9 setup? My 55km/h reached on the road and also in suspension (wheel doesn’t touch the road) . I don’t understand....please help...
is it possible to have just one gear not 3? if yes, how i do it ( just the lowest gear for exempel)
Mine has the P3 problem with my d5 it doesn't match my gps speeds with the wheel diameter as 10 if I change it to 6 like you did will it match my gps ? Because it's it's showing I'm going faster on the speedometer then I am actually going
Hello! Today I noticed great deceleration. Gear after 1200 km was reset to 1 instead of 3. Also, my trip suddenly reset to 0, km/h changed to higher speed numbers and brake level changed to 2 instead of 1.
Just ordered my D6+ with oil brakes last night so stoked!!!
@wattsinyours
4 жыл бұрын
Good luck and keep me posted on how you like it and first impressions.
@1584283
4 жыл бұрын
@@wattsinyours I will for sure
@1584283
4 жыл бұрын
Ordered last Sunday and still has not shipped. Bummer considering I live 80 miles from their warehouse. I also ordered a second charger but it's being shipped by Australian Postal....which is weird. I just wish they'd stick it in the mail.
@wattsinyours
4 жыл бұрын
@@1584283 yeah it sucks with this whole covid 19 stuff. Its really slowing things down.
@1584283
4 жыл бұрын
@@wattsinyours Hey man, so little mini unboxing review. My D6+ just came in today. In reference to the ones you've bought, right out of the box everything was tightened on the frame, brakes, etc. The brakes were already calibrated and the disk doesn't grind.the EBS is also very smooth on 1 out of 3 in settings. They put coverings over all the wires and bunched them with zip ties so no wires rub on the frame. I tightened and mounted the handle bars. The only damage to the entire scooter when I opened it was on the LCD screen, it has a lot of scratches from rubbing against the brake handle assembly during shipping. Asside from that it is very well rounded looking at the past models. The suspension is perfect. I can't bottom it out myself even if I jump up and down on it haha. I think it is more in line with some of the well known brands now. It pulls hard up to 35mph so far on a slight incline. Plenty fast. I haven't tried the more aggressive acceleration in the p settings yet.
Really weird thing has happened with my D5 +. As soon as I power up, the lights come on, the indicators do not work and as soon as I apply either of the brakes, the whole scooter powers off. Is this a control panel or a motor controller issue? How do I know which of the 2 motor controllers I would need to replace, if it is a motor controller issue?
So has there been any new information on how the P03 Setting can be adjusted and as to why the Default Setting is said to be 0 but is set to 1? I have the X4 2.0 and have the very same issues as it seems that they use the very same control boards. Thanks for the video! Good job!
thank you so much!!
If u lower the Power output will help the controller / motor not over burn or something?
Helpful ! strange how that wheel size is so off
Thank you. 🤙🏽
Hey bud I think p7 adjusts how hard the scooter takes off from a start. With this setting at 0 it's a hard acceleration and with it at 1 it's still strong but slightly smoother than 0. I didn't notice much of a difference either until I tried to go slow with it then I noticed the difference
What tire PSI is appropriate? I weigh 220. Also, I'm a little confused with the Eco and turbo buttons. If I want turbo does only that button have to be pushed in or both? Also are the buttons and gears something I change while riding or when stopped?? I would appreciate a reply, I'm a newbie lol
Hi. why the speed controler switches itself off while driving.... Thanks.
Hi, I have stem play on my D5, I can not find a nut to tighten it, any help would be appreciated.
Thanks for the video mate. İts very usefull. I got same controller but different scooter. My scooter has speed limit and I do some research on line. Then I watch your video. Only difference is I dont have p8 menu on controller. Which adjusts the power output. Dont know what to do about it. Do have any advice?
I keep my D4+ set to powerstart but the settings are backwards meaning set at 1 powerstart is engaged, and set at 0 powerstart is not engaged... in the manual it says powerstart is engaged while set to 0 but I get full torque when set to 1, so they just made a mistake in the manual as there are quite a few mistakes. and the manual is the same for all D4+ and D5+ as far as I know.
For accurate speed reading set wheel size to 10 inches and play with the number of magnetic poles ( should be minimum 15). Or you could open the motor and count the magnets. Those 2 settings only affect the speed reading on the display. My thoughts on why they set it to 10 is so they can brag with higher speeds.
What is the best nomber control to serin
My scooter wont fully charge at 58v it only charge 54 v even do its 10 hours charging any tips what to change in p setting?
Do the speeds come pre set already for the gears?
Great video. Really helped Just one thing...I have a 60v 20ah battery. Is urs the same? What's the ideal setting for the cut off for this size battery (P1)? Thanks in advance.
@wattsinyours
4 жыл бұрын
I didn't know they made the d5+ with 60v battery. Are you sure we are talking about the same model scooter? And my setting for P1 is 43v but yours would be different if you had 60v.
Here there any way to remove speed limit?
Do you how to unlock the speed limiter?
Yo if you’re still active, is there like a speed limiter on the scooter? I’ve been hearing about some grey wire but have you encountered that?
@wattsinyours
4 жыл бұрын
No there is not. Thats mainly for dueltrons.
@hedener6911
2 жыл бұрын
Nice scooter, do you still have it now?
Does anyone have a link to the English manual ?
I do all manual at my d4+ 2.5 but when i go like 50 kmh my dashboard show me 25 what i do?
P9, is it regen breaking?
Wow😍
Have you noticed that with p0 set to #6, the low end speeds 0 to 30 mph matches gps speeds however at 35 to 55 mph the speed readings are off. For instance, display shows 45 but GPS says 38 for example. Do you think I need to play with p2 or p3 settings to match high end speeds?
@wattsinyours
4 жыл бұрын
Yes i did. I thought i was the only one that noticed that at higher speeds. I just got it as close as i could but generally only go by gps, but that is only for my rs7 not the d5+.
@wattsinyours
4 жыл бұрын
Also i am still playing around with it so once i get closer to matching gps at higher speeds ill let you know what i did.
@MinhvuLy
4 жыл бұрын
@@wattsinyours I have a maike kk10s by the way. However it seems all these Chinese scooters have the same parameters.
@wattsinyours
4 жыл бұрын
@@MinhvuLy yep. I watched your videos.
One more Question guys on the P1 (Voltage) is it fine to turn my current voltage into 10.0 to stop the automatic Turning Off the Scooter?
@notpewdiepie6458
3 жыл бұрын
I tried that too but it only went to 40v even if I set it to 10v
How to put the scooter back to p0? My scooter is at p2 and I don't see p0
Hello I got is nanrobot x4 and I think the speed meter is showing double the speed. should I play around with p2 maybe that would help I don’t know
@wattsinyours
4 жыл бұрын
The x4 sertings could be different than the rest but you could give it a try.
Mine my P8 not working properly. Its Set on 100. But when I start to pres the throttle its only 50.
Hi could you find me the secret menu of velociptor climb 2 new version?
good day! i was worried about my P2 settings,it was setted into 17.supposed to be 10 for default. i dual motor scoot,1200W each motor..can you please help me.thank u!
@slick1908
3 жыл бұрын
It was set correctly at 17 most likely. That setting only affects the speed reading and nanrobot set it low so they can brag with higher but fake speeds.
Hello..thank you this video,,How do I reset my odometer?
@wattsinyours
4 жыл бұрын
I have never tried but if you take off the 3 little screwes on the back and unplug the throttle and let it sit there for a few minutes and plug it back in. that should do the trick. Let me know how it goes.
So what about magnetic poles? Its number of magnets or stator poles? P7 On 0 Its ramping power / It speeds up engine. When its on 1 Its turbo kick in engine and spinning immedietly at max. I checked thatt when i lift wheel.
Does the electronic break if you use it a lot burn out your control board?
@wattsinyours
4 жыл бұрын
I don't think so but I'm not ruling it out.
@pureluck8767
4 жыл бұрын
wattsinyours let me know? I think that’s why they have it off by default
I have the same scooter. I only have 45 miles on it and my speedo don't work. It says mph 20 but I'm going way faster... any idea what might be wrong .. my settings are all.good ??? Thank you
@RoyceQuigua-ti1qu
10 ай бұрын
I changed from 10" to 6" and will see if that helps on the settings
How do you activate cruise control during a ride?
@notpewdiepie6458
3 жыл бұрын
hold throttle at desired speed for 7 seconds, then let off...cruise set...pull throttle or brakes and it disables cruise
How many miles do you get out of your scooter fully charged I have the same one and can only get 6miles ?
@wattsinyours
4 жыл бұрын
You should get way more than that. Anywhere from 10 to 30 miles. Definitely have some thing wrong with your scooter.
@terrybrewer2121
4 жыл бұрын
I fort so thankx for letting me no
Hey my scoter’s control panel doesn’t start.what do you think is the problem? It does charge and key light power with the number works. But I can’t start the scoter from the control panel with that power bottom.
@wattsinyours
4 жыл бұрын
Probably the plug is loose. Take the back of it off and check the connection.
@tumdinwangyal8047
4 жыл бұрын
How ?
@tumdinwangyal8047
4 жыл бұрын
Do you know how to fix it?
@wattsinyours
4 жыл бұрын
@@tumdinwangyal8047 yes take the 3 tiny screws out of the back of the throttle. Once you take the cover off you will see a plug. Make sure the connection is tight.
@tumdinwangyal8047
4 жыл бұрын
wattsinyours thank I will try that. Thank you again
I am trying to change Brake pads on d5+ any video or instructions?
@wattsinyours
4 жыл бұрын
kzread.info/dash/bejne/h3qDm8V8l82WYcY.html
@shaolindragon77
4 жыл бұрын
@@wattsinyours I found it lol TY i was already taking off wrong screws lol Very easy ty for the vid. Have you found any non proprietary brake pads?
@wattsinyours
4 жыл бұрын
@@shaolindragon77 you can order pads just about anywhere.
Good day can you please help to set mine
How to reset odo?
Are these p settings the same for d6+
@wattsinyours
4 жыл бұрын
They probably are pretty close i would assume. Those J&P controllers are pretty much the same across the board in those type of scooters.
I have I question please, my battery doesn’t display correctly always finishs on 3 🥺😔
@wattsinyours
4 жыл бұрын
Yes you are correct. It is not accurate. You will have to read it by your volt meter. None of those throttle controllers read accurately. Maybe except for the eye controller on the dualtrons but even those are off by a little bit.
@yathrib3161
4 жыл бұрын
wattsinyours thank you for replying 🤗😉
Ordered mine last night
The display does not show the speed. Why???
hi there love your work please continue. ive a problem with the speedometer when im stationery the speedo flickers to 10 the 5 then keep doing it till it hit the throttle and the it chugges on and off i changed the front trie yesterday not sure if that would effect thanks hope your safe and as well acb
@wattsinyours
4 жыл бұрын
I would check your connections and make sure they are tight but more importantly if your throttle is acting weird take off the 3 small screws from the back of it and make sure your plug is pushed in all the way.
I have speed way 4 mini, 10.4 ah 36v,. Please p1? 😭
From what I have researched the interface component you are changing settings on is call the "LCD display with accelerator" not the "controller". The "controller" is the electronic device located under deck of the scooter that regulates current amount from battery to motor based on what you do with the accelerator.
@wattsinyours
4 жыл бұрын
People refer to it in several different ways. Hopefully i am not to confusing.
@wattsinyours
4 жыл бұрын
@Bee Vee yeah i guess people call it a bunch of different things, so i just need to be clear when referring to the "throttle controller" on the handle bars or the "speed controller" in the deck. Not trying to confuse people. Thanks for your feed back and for watching my videos.
@SupergiantgeckosLLC
4 жыл бұрын
Correct
I have question is it necessarily that you should set the voltage above 43 voltage?
@wattsinyours
3 жыл бұрын
Not really. That is the voltage when your scooter will shut off. But if you want you could set it to 44v if it gives you a piece of mind.
@zedroyaldor9984
3 жыл бұрын
@@wattsinyours what if i dont want my scooter to shut off? How would i do that Thank your for responding @warrsinyours
@wattsinyours
3 жыл бұрын
@@zedroyaldor9984 you can set the voltage lower but you can take the risk of ruining your battery. You can't run lithium batteries all the way dead.
@zedroyaldor9984
3 жыл бұрын
@@wattsinyours woah now i know thank you so much very helpfull
@zedroyaldor9984
3 жыл бұрын
@@wattsinyours but if i charged it does it run again?
I accidentally change P3 to 1 and now i cant change it back to 0. Is that bad for my scooter? Please help
@wattsinyours
4 жыл бұрын
Thats weird because it will not let me change that setting in mine. Either way it will not hurt your scooter. Maybe the speed display will be off, but thats no big deal because i go by gps anyways.
@joun17
4 жыл бұрын
@@wattsinyours i have a same problem,and the speedometer is not working, it is because of this P3 - 1 issue?
@wattsinyours
4 жыл бұрын
@@joun17 not a big deal. It just won't read your speed correctly. I do have a video up here showing how i got the most accurate speed and distance reading on my display. Check it out it will help you.
everytime i change the P1 my battery gauge is playing if i put 40 the battery gauge is empty when i put it in 20 the battery gauge is always full even its low bat.
@rcruz2605
Ай бұрын
Same issue
Hi, For P7, I made the swith and for me, it is much more easier to start and ride in dual mode with P7= 0 instead of 1. But the guide is wrong : For me, 0 = normal start, 1 = power start (difficult to start correctly) Concerning the electrical brake, I am currently with P9 = 0 ; I have to test with 1... Not really confortable with it
@wattsinyours
4 жыл бұрын
Thank you for your input and thank you for watching.
Excellent vid Would you mind if I shared on my site?
@wattsinyours
3 жыл бұрын
I don't mind. Thank you for watching.
What top speed are you able to hit
@wattsinyours
4 жыл бұрын
32 but my wife can hit 33
@buxtro7
4 жыл бұрын
I weigh around 150 lbs and my D4 + has a top speed of 40 mph, that is when fully charged I notice top speed decreases a bit as the battery volts decrease as well. I assume I just got a really good battery by chance for the integrity of the battery can be slightly higher or lower in the same voltage battery this is mainly determined by the manner that it was charged the first couple times I believe because that can affect the memory of the battery itself.
@nevartech
3 жыл бұрын
Ludicrous speed...
When I started the video it loaded in 144p, I thought this was like 5 years old until I checked the date and realized it's not
I thought there was a clock on there doesn't appear to be?
@wattsinyours
4 жыл бұрын
No not an actual tell the time clock but there is a counter to tell you how long you have been riding for. I think it starts a 2 hours and then starts counting down. Kinda of useless though because if you turn off the scooter during your ride it will reset back to 2 hours.
My scooter turns off at 2 bars of battery every time it says I can go for 40 miles but doesn’t even get half of that can anyone please help the support team themselves can’t even help
My display has a box appearing on and off like blinking and I can’t accelerate nor run the scooter ?
@wattsinyours
4 жыл бұрын
Could be a couple of things but i would try and take the 3 small screws in the back off and check your connections. If not that follow the wire down into the scooter and check your connections there. The firat one will be the easiest the 2nd a little bit harder.
@PURGE-3000
4 жыл бұрын
wattsinyours what’s that box symbol mean ??
@PURGE-3000
4 жыл бұрын
I did continuity tests on all wires to the controller. Passed but they are small wires and any pinch will render them useless. I’ll double check again. It’s been tearing me up mentally.
@wattsinyours
4 жыл бұрын
@@PURGE-3000 i know how u feel. Keep at it and you will find it.
@wattsinyours
4 жыл бұрын
@@PURGE-3000 what box symbol are you referring to? Also how did you make out on your throttle issue?
Hi, I want to buy scooter please give me advise which one is good and faster .
@joviuma9506
4 жыл бұрын
This is the fastest. You can find it on amazon.com/dp/B07YCX8JCM?ref=myi_title_dp
Janobike 2000W Dual motor electric scooter, This model boyyyyyyyyyy the power start works on my dual it is offffffff pulls up instantly like it's a 600cc Street triple just instant or and old typre 183 typhoon
My scooter is cruise control will not turn off, no matter what I do
I AM GOING TOO UPGRADE IN NEXT FEW WEEKS, ONLY GOT A 15 MPH ONE AN I FUCKING HATE IT, LOL, I NEED SUMMIT WITH SOME KICK TOO IT, 40-50 MPH, I HAVE BEEN LOOKING BUT THERE IS TOO MANY, LOL, I GOT ABOUT 1500 TOO SPEND, WHAT WOULD YOU RECOMMEND, DO YOU HAVE ANY IDEAS, I AM NEW TOO THIS AS WELL, ITCHING TOO BUST HIGH SPEEDS ON ONE BRO, JUST CONFUSED ON WHAT IS THE BEST TOO BUY, SO FAR THE DUALTRON IS CATCHING MY EYE, WHAT WOULD YOU RECOMMEND BRO...
P0 is P10 setting its just sort of a mistake made by whoever created the settings menu, P0/P10 is not used and does not control anything in the computer.
Power start means you can just turn the key and go
Kinda hilarious, the misspellings are still not corrected in the new manuals.
please help
Hi can u pls send me the copy from the setting paper pls 🙈
p7 - 1 - for me is a faster start, more powerful! even if the manual said 0 is power start, 1 slow start, the scooter is not a nanrobot , but looks the same, its a Janobike 2000W and has the same P menu.
@giyermo_
4 жыл бұрын
Upload a video of your scooter!! is amazing
@shapezmotronicaudio1332
4 жыл бұрын
I have both scooters (janobike and d5+) and their P settings are the same, powerstart on is more like dragrace-mode and makes the scooter almost uncontrolable to ride, the Janobike accelerates much faster than the D5+ and it was a lot cheaper even.
P3-1 is an Upgrade according to Nanrobot and the Manuals are old .
@wattsinyours
4 жыл бұрын
Ok thanks. What kind of upgrade?
@SurRon-GLE
4 жыл бұрын
@@wattsinyours Good Question they wont answer have at it all they kept saying was even if i sent it back and got another one it would ship the same
To live in don't mud
Get to the effin point.