Thanks mate that was very helpful. Just got my Nami was very confused about the settings now Everything is clear.

There is still some regenerative braking even when set to 0, you can only disable it by clipping the two white wires in the harness that send the brake lever switch signal to the controllers. The benefit is that you lose the terrible e-brake surge when trying to feather the friction brakes.

Thank you very much, that was very helpful, it gives me more understanding and more control of my Nami!

Love your work Dray !!!!

Thanks, helped me out a lot. Your explanation was easy to digest.

Great video! Well presented and super informative. WELL DONE!

👍🏽 that’s a good one you explain everything properly no joke about that, you have it lock 🎉🎉🎉🎉

Setting the regen to 0 helped me out a lot. The scooter stopped doing a really unsettling nose dive and bounce when braking at speed. Cheers for this video mate it was a great help 🤙

@Andre-cy6yo

Жыл бұрын

P

Thank you good day Vancouver Canada BC❤🎉😊

Good video, debating on buying one 🤔 May wait until spring 2023 though see what new comes out plus no dealer support in my state.

Well done mate!! 👍🏼

Thanks for the video that taught me how to set these things up.(Youdao Translator）

very helpful. Thanks.

Great video, thank you ! Can you tell me how to turn on the USB port?

Have you learned how to change the side light color/function? Got a Burn-E2 today, but the side lights stay constant white even with turn signals on.

Do you know what the dimensions of the smaller box was for the unboxing

Hi is it possible to set the regen brake to 1 in D mode?

Are the set up on this nami similar to the blast?

Where did you get your phone mount ? Can you post a link ?

Help! I have a new Klima and went to change the digital key code which worked fine but I decided to turn it off so I went back to the P setting 14 and saw an option that I thought would turn it off, I clicked on/off to the "off" position and now my screen just says P00 and "off" at the bottom of the screen, everything is locked up and I can't get it to do anything. Any idea?

Is this the same for klima

What are the best brake upgrades for the nami burn e2 max? My one the brakes have a 2cm dead zone! Which means the levers have to be really far away from the grips… I want no dead zone like like my mountain bike so I can make the levers really close… cheers guys for any help :)

@dannydarko44

Жыл бұрын

I noticed that mine does the same but I just got it and now I'm moving really fast I'm trying to break and it's like a dead zone and have to really squeeze food. When I go a little slower they get stronger.

i found the thumb trigger sticks out way to far have you even taken it apart to make the thumb position kinda mover under the handle has a lot of dead space in the trigger was well wish they sorted out the way they exelerate

@dcunplugged31

Жыл бұрын

I believe it's not so much Nami it's a generic part unfortunately and it's used over many scooters. Iv not pulled part mine but have pulled apart another from a different brand. Looks identical but internally the magnet in side has a gap. Unsure as to why maybe safety just incase you might touch it then the scooter takes off with out you realising im not to sure as to the manufacturers motive. But it would be definitely interesting to find out.

What would be the point of putting more power into the front vs rear? Does it help save power? Is it mainly only for rain?

@drde4010

Жыл бұрын

For example if I put 100% on each motor will the power burn quicker? Probably not the right question.

My Nami doesnt show P1.5 or P1.6,how do i find it

so you can adjust every mode? crazy thats a lot of work sounds like,

@dcunplugged31

Жыл бұрын

You can adjust it if you like but comes out of the box pre set well

Getting mine tomorrow great idea to have C mode pre set for rain conditions wounder who else would had thought of that I will do the same and then have X set as insane full power front rear turbo to max😱😂😂

@dcunplugged31

Жыл бұрын

Hahahaha thats what mine is set too X is just fully unlocked track attack

@ryanprice2105

Жыл бұрын

It's insane lol I had error 302 few nights ago then it went away so unsure what that is something to do with front controller I'll, take it out for a blast tonight if happens again back to ride and glide shop to fix highly impressive this thing

@ryanprice2105

Жыл бұрын

Are u UK based

@dcunplugged31

Жыл бұрын

@@ryanprice2105 Australia 🇦🇺 😁

I can’t set my front and rear power settings diffeently, if I do the scooter keeps cutting Out, anyone know why?

Just brought one,doing my homework to see what the best set up is,i want the best handling thing on the road...

@dcunplugged31

Жыл бұрын

Adjust your suspension straight way top 10 best thing you can do for your Nami

@kiwimon3204

3 ай бұрын

​@@dcunplugged31what's the ideal setting adjustment for suspension from and back

Hold + not on torbo😮

Mine says error

P1.2 is a misprint in the manual. It is actually for the front motor only (not front and rear).

Is there a way to by pass the speed restrictor without disconnecting the wires

@dcunplugged31

Жыл бұрын

No as these wires are hard wired to the controller

Hello please I need help: I just bought the 70v 40Ah Burn E3 Max model with NFC boot. It is limited to 15 miles/hour as standard and I want it to go faster. I read the instructions and changed the parameters to the maximum for C and X modes, but it's still the same. Please someone tell me how can I delimit my scooter. Thank you so much!

@dcunplugged31

10 ай бұрын

On the left and right hand side of your scooter where the power controller are you will see a black and grey small wire on the side pull it out and disconnect it

@dcunplugged31

10 ай бұрын

These are restriction wires put in place to limit the scooter

@user-kb2fv6pb5i

10 ай бұрын

Thanks so much!!!

Iv just got one , I wish I could just get mine to charge 😕 £3000 and I can't use it ?? Just a green light all the time ???

@dcunplugged31

Жыл бұрын

Tryed both charge ports

@gatti493

Жыл бұрын

@@dcunplugged31 yes mate

@dannydarko44

Жыл бұрын

I'm sure you figured it out by now but usually when that happens it's a bad charger

G'day mate how do u make numi go faster am only go 22 but I see people go 40 to 50 still don't understand

@paulyoo2761

Жыл бұрын

Remove the two cable on the bottom of the deck, its the speed limiter you can unplug them and you will get full speed

@dcunplugged31

Жыл бұрын

Beat me to it but yes spot on

anyone know how to restore factory settings if I have forgotten password for scooter or is it useless now. I've only had it 3 months ridden it 1 time and now it won't work

@user-yv9tc7uw8f

10 ай бұрын

I want to know aswell

I bought a nami burn e 2max from someone online and it has a code. He wont respond to me about it. What can I do ?!😭

@4partmedia

3 ай бұрын

😂😂😂

Hi i need to know where are you country...

@dcunplugged31

Жыл бұрын

Australia 🇦🇺

@muhammadsoleh4108

Жыл бұрын

Thanks brother

@dcunplugged31

Жыл бұрын

@@muhammadsoleh4108 😁 not a problem at all

As regards to the understanding part , what he's trying to say is if you don't understand it now, get a fcuking Rabbit lad 😉

@dcunplugged31

Жыл бұрын

Bahahahahahhaha

If you have it on x mode all the time can you burn the battery 🔋

Very informative but you tend to repeat yourself, and give too many unnecessary details.

Good day! on my nami screen, (the scooter is standing) the voltage reading is jumping. ( within one tenth of an example: 75,8\75,9. (8 and 9 are changing all the time) Has this situation happened on your scooter?