What’s amazing is when the original mask was made, they just threw it together from the Kirk mask at breakneck speed. Now it takes more effort to replicate the original look

@toddbridgesx

2 жыл бұрын

That's what happens when you're working off intuition vs actually trying. It's always best to go with the flow if you can. That's why most sequels suck because you're trying to capture the same feeling of something that at that time had no predecessor

@Live2Laugh27

2 жыл бұрын

@@toddbridgesx the original mask was just plain appliance white but the lighting is what made it so scary, then in part 2 the mask was stored under a bed with heavy smoking going on and it yellowed it some. Also Dick Warlocks head stretched it more. I’m sure you all know this already tho lol

@bmxriderforlife1234

2 жыл бұрын

Nah if you get a 75 kirk pull with good quality hair and do a conversion it's pretty quick work. Paint 2 colors. Maybe some matte clear coat. Some glue remover and removing the eyebrows and side burns. The eye cuts aren't hard either. People trying to hard is why the masks usually don't look as good.

@stinkywhizzleteats3673

2 жыл бұрын

Someone tell this man you can just buy a William Shatner mask online and recreate The Shape's mask perfectly

@bmxriderforlife1234

2 жыл бұрын

@@stinkywhizzleteats3673 not entirely. You can't get 75 done post studios Kirk's anymore. You can get recast versions but not all are accurate as the recasting process. Also not all don post Kirk's come from the correct mould. You also have to deal with alot of masks being stretched before recasting. Tots masks are sculpted with castle stretch taken into account. It's not as easy as you think to get screen accurate replicas. It also requires some specific shit to get the eye holes cut perfectly shaped if you care to go that far.

When removing the hairline if the factory paint does come off u can use naphtha to thin the paint down like flush with the latex & just paint over it. Or if your skilled enuff with the dremel u can sand the paint down flush as well. Saves loads of time. Great video. Best eye cut tutorial I’ve seen!

@alpass72886

2 жыл бұрын

Currently in that same situation with my 78 myers mask and have the whole forehead peeled off. First time rehauler question; When using naphtha, is there any concern with over applicating and affecting the mask?

@carlshepard306

2 жыл бұрын

@@alpass72886 no. You can use as much as needed. Although it will distort or swell the mask temporarily, it will go back to normal after about an hour or so. Just be sure to clean all the naphtha after you finish with water.

@carlshepard306

2 жыл бұрын

@@alpass72886 forgot to mention but you do wanna be careful around fragile areas like the mouth slit, eyes, etc. I have ripped a mask or 2 in the past when things don’t go as planned. Just use care around the areas where it may rip.

@alpass72886

2 жыл бұрын

@@carlshepard306 thanks for all the feedback man I really appreciate it! I thought I was screwed at first but now im motivated to finish.

@carlshepard306

2 жыл бұрын

@@alpass72886 no problem man. Anytime.

Man directors need people like you Such talent and patience

Looks a lot better than stock finish, can't wait to see the finished result

@NightmareToys

3 жыл бұрын

Thanks for watching!

Subscribed! I have always had a fascination with horror movie masks and characters. When I was in 7th grade I checked out a book from the school library titled "Movie Monsters" with mostly Bela Legosi and Lon Cheney characters. The book discusses how to make corn starch based skin and so forth. I spent hours in the mirror creating faces and shaving my sisters Barbie dolls to make Wolfman makeup. I still have the book 30 years later....wonder how much my overdue fines are? I still make masks and create my own monsters for Halloween and some take 5-6 months to build a complete latex and or silicone costume. The kid in me has never left. Awesome job on redoing Michael. By far my favorite horror movie mask and its simplicity i think adds to his scare factor. Look forward to seeing more of your videos

this video was extremely helpful in converting my Captain Kirk mask. I love how you described his left eye as “lemon shaped” also, perfectly description in my opinion. keep up the good work brother

I love this so much. Thank you for posting this.

That Phantom StarKiller sticker you have on your wall is giving me life! Love to see all the PSK love!

Binging on this video. I love Michael Myers and love your work with the mask!! Make more!!

looking wicked dude! keep up the good work! 🤘🤘

This is insane, love it!!!

Can you do this with all the TOTS masks in order? That'd be really cool imo

Awesome, looks amazing. I love that you guys are doing diferent things for MM.

@NightmareToys

3 жыл бұрын

We love that someone with the name Moist Meat Bag watches our videos!

@moistmeatbag4215

3 жыл бұрын

Hahah thanks

LOVE THE SHIRT😉 I jus had ur channel pop up n didn’t even finish ur video n subscribed Ur defiantly into my type of shit

I love rehauling myers masks!

@NightmareToys

3 жыл бұрын

Thanks for watching!

Underrated video. It should have way more likes!

idk if someone else may have commented on it already but seeing Michael Myers' mask with a shower cap is hilarious

How do not have more subscribers this was incredible probably one of the greatest mask Rehauls I’ve ever seen! 🎃🎃

Cool shelly you said this would come out..Appreciate it man. I came about 3 weeks ago purchased 3 myers masks with my brother. I think you stripping the paint off was a good idea..Im going to do the same..Because the layer they put on isnt workable..The hair ill just use goo gone so i dont go through the pain like you did lol..

I whas always not so sure about the dremel. But after seeing this i will definitely use it for my own projects

Thanks for this tutorial, 1991 James Hetfield! lol Love the work on this one though, seriously!

Pretty dope bro 👍

Yeah!!! That's how you do it!!!

Looking good! Do you think you could do the 2018 mask and show a tutorial?

Hey amigo, so jealous of your skill, its amazing!! Your very dedicated. Subbed pal 😎👍

Came out great dude! What size head did you use on airbrush since the paints thicker? Thanks

Doing a RZ rehaul would be dope

Love the Myers Mask 😊

@NightmareToys

3 жыл бұрын

Thanks for watching!

@artandmorewithrachelnicole

3 жыл бұрын

Your welcome 😊

I really love tots H78 mask I’ve got one it started my collection so it’s untouched. I’ve gotten a few tots Kirk masks I’ve overhauled myself

@Live2Laugh27

2 жыл бұрын

I’d like to see your work

Just wanna say I’m a og and all of us are so I can’t wait to see you hit 100k one day and I can say “I remember the 7k days”

@NightmareToys

2 жыл бұрын

Thank you! Haha! We are happy at 7k. Can’t imagine 100. Maybe one day.

@lekto9250

2 жыл бұрын

@@NightmareToys you will hit it for sure! And also, do you plan to do a giveaway? I’ve been trying to pick up a mask since September but I can’t afford the nice ones lol

never knew that Danny Worsnop was customizing masks!

Nice I love horror movies

Has anyone ever mentioned your resemblance to 80s Lars Ulrich? I think it looks cool

Where is the season of the witch t shirt from? Cant find it anywhere!

Where can I find hair replacement? I don't care for the hair that came with it and been kind of skeptical about fixing it but I believe I'm ready now I just need new hair lol

Yeah, affirmative, correct. Holygani.

This guy looks like he would be the chill funny ass dude that dies brutally in a horror movie. Awesome vid by the way

If you want to make a perfect Michael Myers mask you need to paint the face without covering up the hair and then paint the hair without covering up the face. That’s the way Tommy Lee Wallace did it on the original mask and that’s where the dark shades came from uncertain spots because he did not shield the mask when he painted it.

How much do you charge to regulate a mask?

That’s good

Its funny how all this work is done by artist with painting etc.. when the original mask was just made in like 5 minutes lol, they just cut out the eyes a bit, ripped some hair off, spray painted some black on the hair and spray painted white on the mask and done. Its all about the lighting that gives it that presence like in the film.

Wow! This looks amazing! Do you do commissions?

@NightmareToys

2 жыл бұрын

You can contact Shelley on IG @moths_masks

On my 78 mask, do you recommend to repaint it all from flesh skin to the fright white?? and does the white paint (stock) thats on it affect it in any way??

@shelleymoth6785

2 жыл бұрын

I would suggest doing it how I did it but that's just me.

Can you do a H40 MichaelMyers repainting tutorial? I want to learn how to infiltrate the line，please。

My mask paint messed up to and it sucked I had no idea how to get it off until I started sanding it myself it sucked even after I could not get it back clean so there is small bumps on the mask I almost threw it away

Wow!!!! Do you do Rehauls for other ppl that can send you their mask?

@shelleymoth6785

Жыл бұрын

Yes! Message me on ig @moths_masks

Nice. ^^

One thing I notice with all the new Myers masks’ is they never get the hair right. In the film, his hair seemed a lot thicker in the back and had little curls on the ends. Just my opinion.

I want a got damn Lord Humungus mask!!

Sorry if already asked.....If I didnt want to go through the whole process of stripping off the factory paint, can I just clean the mask really good with alcohol or thinner and go straight into painting it with a flesh tone color Night Shades paint?

@shelleymoth6785

Жыл бұрын

Yeah totally this is literally the only time I’ve ever done that cuz there was an issue with paint peeling. Just use water to clean and start painting p

Can you kind of say where you got the close up reference photos? I can't find any close up like this.

@NightmareToys

2 жыл бұрын

Honestly I just googled 1978 Michael Myers mask and did a deep dive and saved all my favorites.

Hey buddy how can I contact u to have my mask rehauled please

Is the 78 mask you sell on your website redone by you? Or just stock TOTS mask

@NightmareToys

2 жыл бұрын

Stock. You can contact Shelley on IG @moths_masks for rehauls or keep your eyes peeled for when we put rehauled versions on the Nightmare Toys site.

💓

Do you sell these ? I really like your work and don’t really want to waste money on a trick or treat studio mask when yours are so amazing, if you don’t I completely understand. But still want to say your work is amazing.

@NightmareToys

2 жыл бұрын

Thank you! Contact Shelley on IG @moths_masks

Hi. This was great. I have a Halloween Hospital Michael Myers Mask from a German recast (i was told). Can u rehaul it for me?? Thanks.

I’d love to see someone do this with the Kurt mask replica tots makes

@master.exploder5150

2 жыл бұрын

🤣🤣🤣 captain kurt?

@master.exploder5150

2 жыл бұрын

KIRK

@xxxod

2 жыл бұрын

@@master.exploder5150 Kurt Cobain mask

what is the model of that air brush you are using?

@shelleymoth6785

Жыл бұрын

Paasche H

Appliance white is what was used on the original its still made also sold under that ACE brand as Appliance white same manufacturer

@NightmareToys

2 жыл бұрын

Yes but spray paint will crack and fall off over time as well as eat into the latex. The current state of the hero mask is a good example of why not to use it. It worked great for the film but it was not made to last. Also, in my experience, the shade of white is less important than the skin tone that sits under it.

Would I be able to apply the night shades by brush or sponge if I don’t have an air brush

@NightmareToys

3 жыл бұрын

Yeah but you’ll want to soak the brush in soapy water before use and between coats or the latex will stick to the brush and clump up.

@thebegboi_6251

3 жыл бұрын

@@NightmareToys thanks!

Could you please show or try a how to on changing an H1 mask into the H40 mask

@shelleymoth6785

Жыл бұрын

Buy a H40

@royaver2202

Жыл бұрын

@@shelleymoth6785 she don't fit or I would've lol

More please

When I see this dude, all I think about is Billy. Iykyk

Is the paint already mixed with liquid latex?

@NightmareToys

2 жыл бұрын

The paint is latex based. So It is mixed with mask making latex. You don't want to use liquid latex in your paints. Yes mask making latex is a liquid too but it doesn't have a lot of additives and water like "liquid latex" from Spirit halloween or something has.

life could be dream

I love how he's wearing a shirt from the only halloween that doesnt have michael myers in it.

@crimsonpunx

2 жыл бұрын

He actually is in Halloween three, but on a TV in the film.

His brain: -EXACT REPLICA-

Does it have to be distilled water or could it be any kind of water 🤷🏽‍♂️

@NightmareToys

2 жыл бұрын

Distilled water is better. Any water will work but it has a lot of impurities that can corrode away at your airbrush and stuff.

Yeah in that mask video he was saying a mostly white mask w black eyes that was slightly lumpy and minor dirt wear and tear the original and 2... Maybe the new movie...

Your hair is fuckin AMAZING

You should've sprayed the hair black or white like Ben Tramer.

Please let me know

What dremel attachments did u use to strip the paint off??

@davidmond1997

2 жыл бұрын

Felt Tips!

@keithstinnett3109

2 жыл бұрын

@@davidmond1997 thank you!

@davidmond1997

2 жыл бұрын

@@keithstinnett3109 You're welcome! Good luck with your rehaul 🙏🏻

It would be so cool if someone bought the original mask and applied all the realistic damage from real bullets and weapons and then re-haul

Im rehauling my own but the paint is coming off?? How do i stop that?

@NightmareToys

2 жыл бұрын

Are you using latex based paints? Regular acrylic paint will not stick well to the mask.

How should I seal the mask to make it preserved?

@NightmareToys

2 жыл бұрын

There are a lot of different ways to seal a mask. For this mask I used a 50/50 mixture of mask latex and water-based polyurethane.

@darthvaderitasidius4550

2 жыл бұрын

@@NightmareToys thx mate

The base color of the mask should be burned sienna. Washing the white off gives the flesh tone.

You could sell it to Halloween store

There's a guy on KZread that makes costum Jason masks.

what PSI are you using for the airbrush?

@NightmareToys

2 жыл бұрын

About 50 when spraying latex, 20 with ink

@Sir-IKON

Жыл бұрын

@@NightmareToys are you using size 5 nozzle with nightshades? what nozzle for ink?

@shelleymoth6785

Жыл бұрын

@@Sir-IKON size 3 for both usually

3:25 heh...heh heh. No pun intended

Can you rehaul mine

Is that Doug Henning?

Anyway we can purchase a mask of you Bro?

@shelleymoth6785

2 жыл бұрын

You can DM me on Instagram @moths_masks

Man, I hate when the hair is glued on there too well! I've had a couple peel off easily, and a couple rip the paint with it... and then you have to take the rest of the paint off by hand and with a dremel which takes forever as you know.

Not only did I enjoy the video but you also reminded me of how much I need a Misfits coffee cup.

hi, will you make me a hallowen 4/5 mask? :)

@NightmareToys

2 жыл бұрын

You can contact Shelley on IG @moths_masks

Never reference a replica mask for eyecuts, only reference the hero mask when it's unworn

@NightmareToys

2 жыл бұрын

Never pretend like there is only one way to do anything.

I bought two kirks and the hair didn’t want to come off.

Spray the hairline with water several times and hair comes off much easier.

@NightmareToys

2 жыл бұрын

Great tip!

0:23 With your new Lamborghini?

Kills has the best mask followed by 2018

Mikey goes in for surgery... 😂 🎃 🔪 💀

I'm still rehauling my 78 mask and the hair glue is a real bitch. I don't want to rip off the paint so I'm gonna try goo-gone to get off the glue and little bits of hair tomorrow. The first 2 inches pulled off clean but the rest was really on there. I'm not doing a crazy rehaul, just a lazy quick rehaul. Dull the shine, dirty it up, fix the eyes, and glue back the hair...let it dry over night and give him his do. But damn this glue is a bitch.

God he looks,sounds and reminds me of tommy lee Wallace

so anyway, captain kirk inside out.

1978:just paint the face white,remove the sideburns,and make the eyeholes bigger were trying to freak people out.... 1995 and up:Do your absolute best to replicate the 1978 mask were trying to capture past glory

@NightmareToys

2 жыл бұрын

Unless you're me then just do whatever you want.

I got the feeling Christy is not impressed. She is done with Meyers stuff from what I have read.

@NightmareToys

3 жыл бұрын

Huh? 😂😂😂

@drumr72

3 жыл бұрын

@@NightmareToys Yeah, read Kristys comments...she said she is so over all the Halloween franchise shit, done. I am not making this up.

Wish they made a mask for adult male . Not a peanut head sized mask. Last 2 were so small

@xxxod

2 жыл бұрын

The original michael myers mask was tiny because it was made for children. That's what gives it the iconic castle/warlock stretches

The paint came off because you just yanked the hairline pieces. On my end, I carefully pulled them off.

@ExploreTheUnknown

2 жыл бұрын

Any suggestions on how to carefully remove the hair. I picked one up and plan on rehauling my own.

@astrohalo

2 жыл бұрын

@@ExploreTheUnknown ever peeled off a sticker and wanted to have it where it’ll come off in one peel? It’s exactly like that, just take your time. Even if it takes piece by piece for the hairline.

@ExploreTheUnknown

2 жыл бұрын

@@astrohalo Thats prob the best way you could describe how to do this and thank you for the tip! I'm gonna be super cautious when doing this step.

@-WolfMan-

2 жыл бұрын

Spray heavily with water first - the hair pulls away much easier. Pull back, not up.

@NightmareToys

2 жыл бұрын

As I said, I've ripped the hair off of countless masks and that's never happened until making this video. I don't think doing it any more carefully would have made much of a difference.