"GPU cables always look best when individually sleeved" DerBauer soldering the GPU cables directly to the RTX Titans PCB to make them dissappear.

@rafee9442

4 жыл бұрын

And also making a hole in his distro plate for them

@G.D.9

4 жыл бұрын

Where does he do this? link pls

@helloamill

4 жыл бұрын

@@G.D.9 Its on his channel its only a few days old I believe.

@eroenue

4 жыл бұрын

@@G.D.9 He runs one of the best german tech-channels. Here is the link: kzread.info/dash/bejne/ipyrts-vqaqpicY.html

@henrys130

4 жыл бұрын

eroenue Roman is awesome! I’d missed this one as well, thank you sir!

"Even though I know it's not going to be seen, I care." The OCD is real

@lunartigersora4690

4 жыл бұрын

He isn't the only one like that lmao

@jirihorsky9600

4 жыл бұрын

Scale modellers all over the world understand and approve.

@viller7939

4 жыл бұрын

I also care! I don't see it but I know it's there so it bothers me! :D

@metallurgico

4 жыл бұрын

our life is hard

@tonyprano1879

4 жыл бұрын

thats not ocd...thats cdo!!

No enthusiast has ever truly peaked until he/she pays a 300% premium on colored thumb screws.

That's a cable color theme of Sulley from Monsters Inc.

@dalm614

4 жыл бұрын

Mruczyslaw 😂😂😂

You'd think by now that GPU manufacturers would put the power points on cards in a better position.

@Next-nb9pr

4 жыл бұрын

Damn on point just on opposite side it would've been too perfect

@TheSirMeep

4 жыл бұрын

well they do but only for server cards because of height/width limitations of servers

@handlealreadytaken

4 жыл бұрын

Better how? What if the card is up against the front of the case, pump or fans? At least in that position, you are able to reach it in most cases.

@Next-nb9pr

4 жыл бұрын

@@handlealreadytaken If it would be positioned on the back of the card then even with small cases designers could fit a hole for that,in most cases there is alot of unnecesary space

@handlealreadytaken

4 жыл бұрын

Next1289 so if you have multiple cards without a gap for cables your are SOL? We didn’t arrive here because of some random decision. The placement of power connectors are from fitting the majority of layouts.

Gorgeous colours. Lovely build. one thought - a single UV LED pointing at the center of the res may look like a galaxy/nebula in the res with the UV reactive dye

@txstanger

4 жыл бұрын

Yes....UV light on the res!! You know he is thinking hard about it!!

@mikem9536

4 жыл бұрын

@@txstanger That'll be the sequel.

@Pulp42069

4 жыл бұрын

@@jacksonbrown3039 xd?

I love absolutely everything about this build. This is by far my favorite build you've done!

“Jays $0.02” according to KZread CC 😂

@desther7975

4 жыл бұрын

Not too bad for an A.I.

Jay: cares about cables and tubing in the back side of the pc, that he wont see. also Jay: doesn't care about a fan flickering between colors, that wont see

@markomarkomarko

4 жыл бұрын

also, you do see it because it lights up the little logo in the front

@markearl7172

4 жыл бұрын

Its like jay looks at his computer rather than use it lol

"Phils away at a wedding this videos gonna suck" - Jay Me - Watches video, Phil Needs a Raise!!

@polabecak

4 жыл бұрын

And here I was thinking that the B-roll looked really good...if it was actually Jay doing it...

@SpareParts86

4 жыл бұрын

@@polabecak yeah that part was good, give Jay props if it was him ;)

@aaronmorrow4957

4 жыл бұрын

I thought that too! The last few minutes and the B roll were sooo much better, plus he’s funny and adds great complimentary character to the channel.

This build looks amazing. Im always amazed by the way you think of your builds. you plan them out and it shows in the end result. Awesome job!! :D

Love the content Jay! My favorite KZread tech channel. Well paced and thought out tutorials and product reviews/builds. I buy products in large part to your recommendations, but I digress.

Phil: *gone* Jay: *helpless*

"The lighting is gonna be out of... contrast?" Nah, it's just that new upcoming director's style, maybe you've heard of him... JayzTwoCents Abrahms. Lots of light to highlight odd things, like the tiny hairs on his ear. :P

@JMUDoc

4 жыл бұрын

"How much lens flare do you want?" "Yes."

Looks awesome man!!! Congratulations on all the success you have had making this channel. Really proud of you bro. Been a fan for the last 4-5 years! Love what you're doing :)

Gorgeous build and Phill did an incredible job on the edit. Well done both of you!!

I think we need a "how to edit like Phil" video cause dayum

@frickingphil

4 жыл бұрын

Cole Loudermilk it’s a lot of loud mechanical keyboard flailing and every once in a while something cool gets rendered

@OsamaRana

4 жыл бұрын

@@frickingphil Idk about that, he does a fantastic job with the PC montages, every time

@frickingphil

4 жыл бұрын

Osama Rana thanks man haha much appreciated 👍

@ToTheGAMES

4 жыл бұрын

@@frickingphil Phil Phil Phil could you edit a girlfriend in my life please? Thanks!

@frickingphil

4 жыл бұрын

@@ToTheGAMES I haven't figured out how to edit one into MINE yet so gimme a minute

When you spend more time building your rig than you do gaming on it. Never change jay

@michaelwightman6745

4 жыл бұрын

I used to spend more time over clocking then gaming, I was always chasing those numbers. Now I just find a decent stable setting and stick with it.

@poolboy1690

4 жыл бұрын

Guilty here!

@vfreeman3188

4 жыл бұрын

Shots fired, just not on your respective Rigs

@rafee9442

4 жыл бұрын

@@michaelwightman6745 as long as it's above 60fps, or 144fps for competitive stuff; I'm happy

@michaelwightman6745

4 жыл бұрын

@@rafee9442 I just stick with 60fps. I'm easy to please.

Love it, the lighting definitely brought about the cable and thumb screw selections.

LOVE IT... What a fricking machine and a piece of art it is... I'm not afraid to say I'm completely jealous.. That chrome tubing, OMG.. absolutely GORGEOUS...

I love everything about the build except for that fact that it reminds me of Wild! Berry Pop-Tarts and makes me hungry. Otherwise a beautiful build!

That thing is going to put out some serious frames in World of Warshiips.

Looks gorgeous Jay! I'd love to see more B roll when your system is up and running. Keep up the awesome designs!

Wow. That is beautiful. Well done Jay. By far your best looking build yet.

I really enjoyed the more relaxed vlog style of this video. The lower energy was a nice change of pace.

so how many fans do you want? jay: YES

@sirius4k

4 жыл бұрын

Apparently Jay has ~2.21m fans.

I really love the look and feel of this rig. Thanks for making all that magic yall.

A beautifully built rig. These colors and theming are right up my ally.

13:40 excellent Phil montage ... as always! ;-)

Jay, you should retry the chrome paint, I use chrome paint when doing gunpla and I always use a high gloss black paint first then paint the chrome over it, this way you get depth and a more chrome like finish, that you can polish

Sick build, as always. Love seeing these builds come together. Enjoy it when you get it home!

This montage is one of the best I‘ve ever seen. Really top notch, also your build looks gorgeous as hell.

Creepiness at 7:42 where Jay's talking but his reflection isn't 8O

this reminds me so much of his old videos i like it

I really like everything about this build. Just awesome, Jay!

So freaking sick! My favorite build you've done so far. Some purple dye in the fluid would be sick too

That RAM lighting though... Phenomenal aesthetics! The way that your heart cramps, beats stronger and both faster and slower at the same time when you get to the end of PC building. Congrats, man!

Gorgeous - when you were commenting on the GPU wiring, I just glanced at mine and was disgusted haha.

@GTAmaniac1

4 жыл бұрын

I don't have to worry about gpu cable wiring because my Rx 46 draws 60w max

@GTAmaniac1

4 жыл бұрын

@@fayenotfaye I have an MSI 4gb and it doesn't have a 6 pin and I tested it's power consumption under load and it hovers around 57W

I love the different color thumb screws. It's small, but it's great! Great build Jay. Love it.

I think it looks great Jay! Fantastic job and really the only way you get one to look like that requires time. I hope it runs as good for you as it looks!

Classic Jay is still good Jay. I enjoy watching all the Jays.

Captions be like “what’s up guys Jayz $0.02 here”

@TheScrubmuffin69

4 жыл бұрын

Man what a classic comment. I remember reading this about 4 years ago

@--_9623

4 жыл бұрын

Actually it is "jays"

@sandwichbandit779

4 жыл бұрын

Technically the cc aren't wrong

@One_Bar

4 жыл бұрын

To be perfectly, grammatically, correct, they should read “What’s up guys? Jay’s $0.02 here...” Instead they read “what’s up guys Jays $0.02 here...” 🙄

5:48 Like the pci thumb screws idea, never thought of that before something I will do in the future. Thanks Jay.

I love the look of clear fluid tbh! Oh those steel tubes look incredible! What a beautiful build!!

Wow! Amazing build!

I recently started useing velcro instead of zip-ties in my builds. They're soooo much more practical and (in my opinion) clean looking.

@AmKhaibitu

4 жыл бұрын

He could order some from Linus, but they'll probably clash with the colour scheme.

@raybbo

4 жыл бұрын

@@AmKhaibitu Just order some from aliexpress :P They dont cost anything at all and look clean. Not the sloppy velcro but the one that is marketed to bundle phone cables etc

@AmKhaibitu

4 жыл бұрын

@@raybbo I don't need them, since I hide my cables away, but Jay might.

@kaldo_kaldo

4 жыл бұрын

Linus: lttstore.com

Beautiful build Jay, worth all the time and trouble. I love M.2's. No more SATA cables to mess with. I also never wire up the front panel cables other than the power switch. I love that part of a new build, that will it boot moment.

I think it looks beautiful. I like the clear fluid and cables look great to me. Very clean looking badass rig.👍

Tfw the back of Jay's tower is worth more than your PC. 😕

@kavinsp

4 жыл бұрын

*Cries in no pc*

@user-wq9mw2xz3j

4 жыл бұрын

his pc is worth more than my car

5:43 My favorite Quote you've said all year "That is with the Purpurh blu-blu prpr prpr..."

It really does great!! Congrats Jay hard work pays off.

The editing on that showpiece scene was really well done. Great job!

The clear liquid gives it more of a starry vibe with those bubbles than a dyed liquid would have anyways.

13:47 "Mr. Jay, I don't feel so good."

Congratulations on finishing this build! Looks fantastic!

Jay every one of your builds are incredible, but this one will ALWAYS be my favorite!

your PC is worth more than my car also if I were you I'd cut a hole underneath the gpus and route the cables through there, that way you can stack them, you'll need new cables but I think you'll still do it

@kungfublob5951

4 жыл бұрын

some bummy ass car

@szn7548

4 жыл бұрын

3-4 k for a car is not bummy

@dubklanky9035

4 жыл бұрын

@@szn7548 lmao it's hella bummy

@nohbodhi1120

4 жыл бұрын

@@kungfublob5951 it's a used 2009 Audi A4 2.0. I'm also 17, in college, and I bought it myself. I paid $4.5, spent 500 ish engine swapping with a totaled 3.1 v6, straight piped, am wing and lip. All together about 6k (I thought the PC cost more than it does). While my car is less expensive, it definitely turns more heads than you do in your $25k new Toyota Corolla sport

@xelasoccer

4 жыл бұрын

My first PC cost more than my first car and I owned them at the same time....PRIORITIES!

I'm in love with this building. Absolutely a work of art.

After been building computers for many years for friends, family and cooperations I totally lost the passion for it. It was gone for years. until a year ago or so when I found your channel. Now I'm working on my new build and it's fun again. Thank you for that keep up the amazing stuff and your build is awesome.

Glad to see it all come together! Looks amazing.

I trained my cables once it went something like this: "Sit" "Roll over" "Ly down" ....didn't work

Jay, put a short uv strip on the back of the res out of sight

One of the most gorgeous PCs you have put together so far! I think a whole office with that theme in mind will look absolutely awesome.

seriously jay, good luck out doing this build. what an ab sulute beauty.

When ur gpu costs more then most rigs and you have 2 of them

Someone needs to make a guide on how to name your pc

Congrats man, the attention to detail is apparent, I think the clear looks cool as is

It looks amazing and I think you nailed the theme perfectly gj!

"What would you use it for ?" "Aaahm, Solitaire and stuff..."

I miss the look the build had with the resonance. Still looks amazing though!!

Looks amazing Jay ! love the color scheme !

congrats on the new rig. love that color scheme... reminds me a little of mine from this summer

Hey Jay why not 3D print up some "shrouds" to cover up the unwanted wire mess

Looking at this beauty, then looking over at my build is super depressing. 😂

Wow, that montage was beautiful and seems like a LOT of work. Good job!

Wow. Insane build. That build shows why I am such a PC enthusiast! Perfection to its limit

WOOT, I literally Clapped when I saw her Post.. GG JAY

Man I wish I could afford something like that...its beautiful.

Glad you're happy Jay! Love the color scheme

Your AWESOME NEBULA turned out great! Good Job Jay

Last time I was this early Post Malone still didn't get his build

@joshblevinswebengineer

4 жыл бұрын

On the bright side, nobody really builds shiv right now. So you have all the time in the world.

@fknloui

4 жыл бұрын

Joshua Blevins shiv is garbage item, agreed

@marahenia8820

4 жыл бұрын

POSTponed🤷🏾‍♂️🤷🏾‍♂️

@Qardo

4 жыл бұрын

In fairness in defense of Jay. Post Malone was the one that kept Postponing the build. As he was so busy at the time.

@markchamorro8409

4 жыл бұрын

Lmao

KZread translate will occasionally translate JayzTwoCents to Jayz $0.02 😂

This final product looks incredible Jay!

Gorgeous build jay, very nice work.

I'd go with a darker purple light if you can.

The tilted tee fitting on the back triggers me every time I see it.

Great job, jay. This looks amazing.

This is truely an awesome build Jay, it really came nicely together in the end. :)

This is one of the most gorgeous builds I’ve ever seen.

@pieternaude1469

4 жыл бұрын

It really is, I thought it was going to be mostly dark, but it looks like it could fly Thanos's ship.

Jay: "the cables are a mess back here" Me: looks over at my mid tower with 8 corsair ll fans, commander pro, 2 ssds, and a non modular psu *cries*

keep up the good work jay all your builds look amazing and love watching you vids

I love the chrome tubes, and the colors. I agree, the clear water I think is best, goes with the chrome.

I wonder how many games these days (2019) take advantage of SLI? I keep hearing how dual gpu use is dead from lack of support.

@Daibowmorgan

4 жыл бұрын

It's an ultimate build, because duel SLI looks soooo cooool, the whole build is opulent to the extream, but if i could...I would.

If the CPU tubes in the middle are transparent it would look even more cool.

a beautiful beast!! nice work J!

Hope u enjoy your new rig jay it looks great

This is a very nice setup... Makes me think me a lot of a redeux of the TJ07 from TechMaxTV from yesteryear... Cleaner wiring too! Heck, if you know any German translators, a mesh-up build would be epic!

@discostoo

4 жыл бұрын

Der8auer.....

So why did you decide to use two seperate 8-pin EPS cables instead of the pro combined 8x8-pin cable kit? Legit wondering since I'm considering those cables for my next build.

@iModization

4 жыл бұрын

ChintzyPC if I had to guess I’d say it’s because CableMod only offers the “pro” option on the individual cables (which is the option that comes with the higher quality cable combs). If you get the 4+4 pin EPS connector or the 8+8 pin PCI power connector then the pro option isn’t available. So long story short: he probably wanted the ones that come with cable combs

@Rainbow__cookie

4 жыл бұрын

Also you don't need to use 2x 8 cpu connectors

@013forlive

4 жыл бұрын

@@Rainbow__cookie For overclocking you do depending on the amps you draw.

@alfonsputzeys9228

4 жыл бұрын

I think beyond the 3800x it's Starts to be required to plug them in for insurance to be on the safe side when overclocked. That's just my taught train as a newb pc builder. Starting my 1st build soon.

@chintzypc5508

4 жыл бұрын

@Zach Campbell Last I looked you can still get a combined set with the pro versions and the pro's can come with combs if you want. I guess they may have changed this since I last looked. @@Rainbow__cookie It's safer to use 2x8, but as Buildzoid has pointed out you're right, it's not absolutely necessary with today's chips. They won't draw enough to really need it even on LN2. I'll be using two though since I can afford it, I might get an upgrade that could require it later on, and it's more aesthetically pleasing.

Love the video and love to see the behind the scenes trial and setup awesome to know.

That PC is sick! Totally awesome. Like also the LTX shirt!