Much to learn you have! 1-I wouldn’t get too hung up on the live data, especially the minimum and maximum values that show up, if you think you have a problem, data log it. 2-easiest way to know if you have a boost leak is to data log and send to me lol. Or just see what your afr’s are in boost, and monitor long term fuel trims

@AustinBernerr

5 жыл бұрын

I do have a ton to learn lol, I’ll send you a log either this weekend or early next week!

@eliteflxsen363

3 жыл бұрын

Spilly, Could you do me a favour and read the comment I have just made and possibly help out? I am a little confused on why my car is making the boost it is.

@xsct878

9 ай бұрын

@@eliteflxsen363 why wouldn't you write what your issue is in this reply, rather than them needing to go search out your comment, dumb ass.

this guys say he doesnt hit 16 psi and doesnt even use maximum rpm range and complaining about omg man!! i am ready to pull on my hair and flip some tables!!!!1

Oof scary doing pulls on OTS maps. Get a fmic and a pro tune! Just did a Treadstone fmic kit for my 6 and a freaktune, feels great. Up next is BC coils then bigger turbo/downpipe and exhaust

@AustinBernerr

5 жыл бұрын

Yeah definitely will be getting a good tune on it soon before I drive it anymore, I’m a noob to this lol.

@daevid21

4 жыл бұрын

Have a buddy who runs OTS stage 2 on his speed 3 with no problems I’m guessing it’s fine just don’t beat the shit out of it

Where can I get some wheel that fits my Mazda speed 6 ?

Also axles suckkkk so bad just did the passenger on my friends and it’s terrible. Don’t bother disconnecting the tie rod, both control arms disconnected from the knuckle let the knuckle assembly with the brake rotor move enough to slide the axle out.

@AustinBernerr

5 жыл бұрын

Ok I’ll definitely do that! Thanks for the tips!

What wheels are those and setups ?

Might need turbo inlet pipe+ cbe to actually hit that 17 psi mark

@NewDemons666

3 жыл бұрын

These turbos hit 15psi stock 😂😂😂 but yeah, and a pro tune

@evancai6061

Жыл бұрын

My stock hits up all the way to 18

I have the same ap and same tune if you hover over the tune and hold the middle button it will tell you the specs on that tune

@AustinBernerr

5 жыл бұрын

Awesome didn’t know that, thank you!

@jimmychampion3512

5 жыл бұрын

@@AustinBernerr ya with that tune you'll hit 15.5psi but if you put that stage two map on then you should hit around 16.5 or 17

Did the blue supply line have a plastic clip on it that went on the metal part? Had it on mine dont know if its necessary

Is the internals really required for the speed ?

@kings559county5

3 жыл бұрын

Yes they will give out

I wouldn’t have wasted money on that short ram intake, would have gone straight for a 1 piece 3.5” htp intake, BNR S4v3 ready lol

hope you you’re not flashing those cobb maps on the ap. Go with a pro tune or e tune, there are plenty of good tuners out there like freektune etc

@AustinBernerr

5 жыл бұрын

Yeah I am 😬 I’m waiting to get pro tune till I get my exhaust on. Hopefully it doesn’t break lol.

@timmeister6721

5 жыл бұрын

Yes- this ^. No OTS tunes My custom Freektune running 20psi on stock k04. Check with local exhaust shops before buying - I had a custom cat back 3” to dual 2.5” stainless built and installed for just under $400. I had a guy in a 2019 Scion TC tell me how good it sounded as I passed him!... the look on his face was wtf is that 4 door sedan that just gave me the business??

@boostedsolutions2936

5 жыл бұрын

Austin Berner sheeeeez 😬😬 that’s no good you should unflash it and get a real tune. Or just don’t beat it but it’s best to not use any those maps. I own a speed3 idk if it’s any different than 6s but those maps aren’t good for these speed3s but i’m guessing its no different.

@AustinBernerr

5 жыл бұрын

Ok yeah I don’t plan on driving it very much in the next few weeks so I’ll definitely get one

@boostedsolutions2936

5 жыл бұрын

Austin Berner okay good look online there are plenty of forums of which tuners best etc i’m currently being tuned by justin @freektune, car feels great driving, runs super smooth. you won’t regret buying that tune 👍

I'm on it 💯💪🏿

Hey bro jus subscribed was hoping in future u can go a bit into more detail when ur installing upgrade parts it gives us more from ur channel if u do. Neway Godspeed.

Good stuff! But I’m wondering why it won’t hit 17 PSI… that’s kinda odd. Maybe the speed god would know why, you should try to get it to make 17 PSI!

@AustinBernerr

5 жыл бұрын

Don’t worry I will get it there! It’s coming soon!

@user-vv6ns5dw4v

5 жыл бұрын

Austin Berner good to hear, I’m excited!

How you doing with your new taillights? Any issues?

@AustinBernerr

5 жыл бұрын

Taillights are working great! Zero issues!

Don't know if this is normal, or if my car just wants to off itself, but I have HPFP Internals, Blowoff, 3" Straight pipe with the stock downpipe, 1 step colder plugs and I am on a Cobb Stage 1 91 tune, my car averages 16.5-17.5psi of boost. When I get my intake, Catless Downpipe and front mount Im going straight to Stage 3 93 Octane tune until I get it Protuned, Considering im already making pretty much stage 2 91/93 Peak boost What should I be looking at for boost on the Stage 3 93 Tune? The tune says roughly 18psi peak boost pressure tapering down to ~16.5psi by the 6700 RPM redline, +/- 1.5psi but I feel like I am going to be making more.. Is this good or bad?

@spillybuilt7491

3 жыл бұрын

I would suggest getting the part on the car that you want, and then purchasing a professional tune from purple drank tuning

I had 15 psi on stock 6. With same specs as u have now, my top is 21psi.

@AustinBernerr

5 жыл бұрын

Weird, I’ll have to look into it.

Try to stay away from cobb parts as much as you can, if you really have to try searching around, I'm sure the most popular site to find most if not all parts for the speed3 and speed6 platforms is edge autosport

@daevid21

4 жыл бұрын

Lol you have any idea how many people run COBB stuff they make fine parts

I just got a mazdaspeed6! i’m lost at where to start😂

@zach2032

4 жыл бұрын

Andrew Cerreta high pressure fuel pump first before anything just to be extra safe

@sleeper.simulant7327

4 жыл бұрын

The first purchases should be a high pressure fuel pump and a Cobb accessport before anything else. Then you can start modding with intake, exhaust, intercooler, bigger turbo, etc. also tune your car for every mod you do. Can get a etune from Justin at Freaktune or if you have a dyno tuner like I do just set a dyno appointment up and they’ll remap it. I’m lucky to have a Cobb protuner. They do subies, Evo’s, fords, and VW’s that take the accessport as well

Is 5.10 knock retard occasionally is is something to be super concerned? Just wondering. And if so what could the problem could be? I hear this guy after changing the internal fuel pump he saw significantly lower knock numbers.

I bought my car with some previous mods. it has corksport 3” intake, corksport turbo back exhaust, hks blow off valve, and an accessport, I think I have hpfp but i’m not sure the car came with the corksport hpfp case with pieces inside, I can’t tell if it still has stock or aftermarket are installed. is there a way to see if I have them or not

@AustinBernerr

5 жыл бұрын

Don’t quote me on this but If it’s aftermarket it should make over 1700psi on Wide open throttle

@boostedsolutions2936

5 жыл бұрын

Austin Berner noooo never do that WOT without knowing. The only way to find out if you have HPFPs is to remove it and check. There are plenty of forums out there you can check out.

@AustinBernerr

5 жыл бұрын

Listen to him ^ I still need to learn my stuff.

If anybody can help my MPS 6 driver side door can only unlock n lock when I use the key when using remote every door works except driver side door

@MrAnnihil8

3 жыл бұрын

You can reset the locking system using a code command (ignition on and off 3 times and opening and shouting the door 2 times) or something of the like . None of mine were working and it allowed me to reset them all. Google search it and see if you have any luck with that

what do you mean by primed?

@AustinBernerr

4 жыл бұрын

Just turning the key to power the fuel pump so it sends fuel through the system

@561drew2

4 жыл бұрын

Austin Berner oh ok, thanks

Do you know how to reprogram your window switch’s

@AustinBernerr

5 жыл бұрын

If I remember right you put the window all the way down then go back up and hold it up till you hear it make a click then repeat it for every window switch.

@GrimyDriver

5 жыл бұрын

Austin Berner that’s right but you don’t have to go all the way down

@anakinle4100

4 жыл бұрын

What does reprogramming ur window switches do when wld u need to this??

🤙