My Maps Are SELLING FOR $450
Тәжірибелік нұсқаулар және стиль
I walk you through the steps of my process of creating high-end maps using wood, epoxy, and a laser cutter. I cover everything from the design phase using Snazzy Maps and Illustrator files to the practical aspects of laser cutting with the Ikier Laser cutter machine.
Ikier K1 Pro Max 48W Laser machine.
amzn.to/48t5DgW
You'll get a close look at the precision of the cuts, learn the assembly techniques, and discover how to make a modern plywood picture frame to showcase your masterpiece. The video concludes with a reveal featuring different maps, all captured with a cinematic touch in both filming and editing.
This DIY journey is packed with valuable insights, making it an engaging watch from beginning to end. So, if you're interested in crafting unique maps, hit play and let's dive into the process together!
00:28 Design
01:04 Laser Cutting
02:10 Glue Wood
02:44 Epoxy
03:51 Picture Frame
06:14 Top Coat Lacquer
06:50 Final Reveal
My new camera gear:
Lumix S5IIX amzn.to/4aq3Wm2
Lens Sigma 24-70mm f2.8 amzn.to/3GVZpuc
By using the links above, I earn from qualifying purchases. Thanks for the support!
#diy #woodworking #epoxy #laser #map
My Process for Crafting High-End Maps with Wood, Epoxy & Lasers DIY
Making Wood Map Art with Epoxy - Laser Cut DIY Project
Пікірлер: 9
Don’t forget to subscribe, and if you’re interested, get 300$ OFF the Ikier K1 Pro Max 48W Laser Cutter for a limited time only! amzn.to/48t5DgW
Nice work on the maps and the video. Footage out of the Lumix looks great as well!
So cool ! Very creative bro✌🏻
Pretty cool
@mateostabio
6 ай бұрын
Thanks for watching!
the N95 mask had no filters
@mateostabio
6 ай бұрын
N95 is definitely not the mask you want to wear for this. I have organic vapour filters
Nice job and good video. May I ask you how do you prevent the epoxy bleeding into the grains of the plywood. Did you seal the edges with something what is not shown in the video? Thx for your answer...
@mateostabio
2 ай бұрын
Hey thanks, cool that you know that it would bleed into the plywood layers. I didn’t know that with my first couple of maps. In this video it did bleed a little through but I sanded a little bit too much off the wood. What I did on the last map I made a few months ago was i glued the 2 back layers, and then I lacquered 1 or 2 coats, just to seal the wood, and then put the epoxy. That came out super clean. And the beauty of it was even if you get a bit of epoxy on the top wood layer. You can just clean it off with a Scot towel. Cheers!