SEW just got some great publicity; how very generous of them.

@pinkponyofprey1965

3 жыл бұрын

it's a win-win-win situation if you include the subscribers watching great videos in the future and it's good info for everybody. I'd rather watch Marius use real products than SEW have some PR company make a lameass version of it with voice overs and hired "actors" looking like woodworkers.

I know it's good public relations for SEW, but I still can't help but admire the kindness of people who just send products to folks like you, Marius, with no thought of reciprocation. "Steve" seems like a very cool guy.

@BenMitro

3 жыл бұрын

Everyone wins...Marius, SEW and us, and we will get to see the other unit at some point. The comparison will be interesting.

@ArnaudMEURET

3 жыл бұрын

It’s a nice relationship, yes, but kindness has nothing to do in it.

@BenMitro

3 жыл бұрын

@@ArnaudMEURET It took something on Steve's behalf to consider giving away such an expensive piece of kit to a creator whose audience is unlikely to every buy one. I think you do "Steve" a disservice.

@ArnaudMEURET

3 жыл бұрын

Benny It took a semester of brand marketing and communication at the Business School. There’s nothing wrong with that and this implementation is 1000% more honest than all the turpitude that the marketing has inflicted us for the last century.

Steve looks like a good guy.

@UlisesUlises-xc6wp

3 жыл бұрын

Sure

@chrisis9030

3 жыл бұрын

A good thing he didn't send 10 keyboards, though.

"It wasn't" made me lol.

Ever since DIY videos came into being, there have been DIY videos and DIY videos galore. Then we have our genius of geniuses named Marius Hornberger. Who could ever need better than this young man? Huh? Thank you Marius. You are truly a unique person, to the "nth" degree. And it gets better with each new video. May Jesus continue to bless yours gifts of talent from heaven.

@MariusHornberger

3 жыл бұрын

Thank you really much!

@thewolfin

3 жыл бұрын

videos*

@Marius Nice job, welcome to the VFD club :) I have a few suggestions: 1. You configured the motor to Delta that equates to 220V, but your drive is 380 and you obviously have 3ph power in the shop. Most drives are more efficient and definitely less noisy when running the motor at input voltage - not sure about SEW as I never used their drive, but it holds true about other 5 brands I have. If you reconfigure the motor back to Star and raise the drive voltage to 380 you should notice the difference. If this setting was suggested by SEW people, I'd be very eager to find out why. 2. You can typically set starting time more aggressive then the breaking time because drive can draw a lot of energy from the mains but it can only sink the breaking energy into itself. Breaking resistor can help but even with it there's still a difference. Your drive should not be breaking a sweat. It's driving half it's rated load, don't worry about it. As for mechanical side of things, without VFD start time was 0s so as long as your belt don't slip on startup you can speed it up. Of course, if you don't need it any faster that's fine as well. For slowdown limiting factor will be either belt slip or drive capacitor overload error. Essentially, if you dump too much energy into a drive it'll shut down and let the motor coast down to a stop. When that happens, you back off a little bit and that's as fast as it'll stop. 3. I mounted my drive as high as possible above the saw (in my case a small Emco BS-2, so the drive is on a mast above the saw body. Wood dust will not harm the drive, but blowing it out with compressor set to low pressure from time to time is not the worst idea. 4. Emergency stop switch can be added in series to a normal stop switch(unless SEW has a dedicated e-stop input). I saw people mounting it at knee height, possibly wit a bar over it so it can be actuated by simply leaning on the bar. Useful if you ever really need it. 5. To reverse the motor you can also switch any of its two phases or simpler configure the direction in software 6. You mentioned max motor speed was 2000RPM in which case you're over-driving the motor. It's not a big deal with a small motor, but voltage has to remain pegged at 220 or 380V even if you raise the driving frequency otherwise you'd burn the insulation in the motor. Since motor has higher impedance at higher speed, this means it's drawing less current then it would if the V/f ratio was maintained and you loose torque once you go over rated speed. This is also not an issue, but it's good to know if you ever run out of torque. 7. When soldering, heat up both metal parts , not just the wire. Actually, it's usually better to heat the contact more then the wire as insulation will melt sooner then the potentiometer. 8. I probably wouldn't drill through the frame in that spot as you want it as rigid as possible against the blade tension.

@MariusHornberger

3 жыл бұрын

Wow, lots of information, thanks!

@vedranlatin1386

3 жыл бұрын

@@MariusHornberger Hope some of it helps :)

@vedranlatin1386

3 жыл бұрын

@@MariusHornberger Just remembered number 9. :) Shielded cables (their shields) are supposed to be terminated only on one end. Usually on the VFD side. Other end can be mechanically secured or even connected to the isolated enclosure but it shouldn't have alternative electrical connection to the ground.

@philippe-h.sartieaux7998

Жыл бұрын

@Marius Hornberger 1. & 6. The motor is a 1400rpm and should run at max 2000rpm. With 230V drive, you can only run 1400rpm at nominal power. As not all parameters were shown (and I didn't read the SEW manual), I'm not sure what/how it is configured, but it is perfectly possible to setup a drive to reach 2000rpm with nominal torque (the motor power will be "increased" to 2.14 kW). Motor parameters are 1400rpm at 220V and 50Hz with 6,3A delta. If a drive is configured with 2436rpm at 383V and 87Hz with 6,3A delta, the max speed can be limited to 2000rpm. For this a 400V drive is necessary! When running at 2 or 3 kHz switching frequency your drive needs to be at least 2.2kW. When using higher switching frequencies (6, 8, 12 or 18 kHz), the drive needs to be overrated to 3kW as the drive will heat more at higher frequencies (this can be found in the drive manuels). 10. Place an EMC filter before the drive if you wish your electronic household equipment (computers, microcontrollers, power supplies, ect.) to survive normally. VFD's create EMC signals on your power network. 11. A household 380V differential (300mA) is not suitable for a drive and might shut off when starting the motor. These differentials are of type A. For drives you need a type C. For one drive on the network, this should not be a problem 12. If running below 20Hz (and somewhere above 60Hz) the fan of the motor won't cool the motor correctly. Do not run below 20Hz (configure the minimum speed of the drive at 20Hz)

@dieSpinnt

Жыл бұрын

@@MariusHornberger Tja, auf KZread wird man es wohl besser wissen (wie immer **prust** ) als der Hersteller(!) des Frequenzumrichters UND des Motors. Also das musste dir erst mal auf der Zunge zergehen lassen ... Drehstrom-Asynchronmotoren leisten in Dreieckschaltung das größtmögliche Drehmoment. Man kann etwa von 0,5-1 * Mn (Nennmoment, stabiler Schnittpunkt der Drehmomentkennlinie mit der Lastkennlinie) also ca. 1/3 des Wertes bei Dreieckschaltung ausgehen. Der Frequenzumrichter hat ja gerade den Vorteil, dass er sich frei Parametrieren lässt und man unabhängig(er) von der Versorgung ist, bzw die Motorkennlinie optimal ausnutzen kann. Was zum sprachlos Staunen anregt ist hier übrigens, dass sich keiner hier mal das Handbuch anschaut und dafür lieber frei los fabuliert und hier ein Unsinn verbreitet wird, der nicht zum Aushalten ist. In Kapitel 6.5.2 Spannungs-Frequenz-Kennlinie" des Handbuchs zu MOVITRAC B(mc07b0030-5a3-4-00) steht: "Die U/f-Betriebsarten führen den Asynchronmotor an einer belastungsabhängigen Spannungs-Frequenz-Kennlinie. In den VFC-Betriebsarten wird ständig das Motormodell berechnet. Stellen Sie die Kennlinie bei der Inbetriebnahme mit Motor-Bemessungsspannung und Motor-Bemessungsfrequenz ein. Die Einstellung bestimmt die drehzahlabhängige Drehmoment- und Leistungscharakteristik des Asynchronmotors." Da kann man nur hoffen, dass der andere Kommentator dort oben auf KEINEN FALL Kontakt mit Kunden hat, etwa auf die Art, dass er solche Geräte installiert, worüber er noch nicht mal die Grundlagen beherrscht (kann natürlich auch an totaler Verwirrung durch die Nennspannungen hier in Europa liegen ... das bezweifle ich aber, hehe). Weiterhin: Netzfilter gibt es, siehe 4.21 Netzfilter NF. Sowie auch Ausgangsfilter und Filter der EMV-Klasse. Ob du so etwas brauchst ... mit deinem 128KW Motor für dein Kaltplatierwalzwerk (kleiner Scherz), weiß ich nicht. Das weiß übrigens auch niemand anders und schon gar niemand mit einer Ferndiagnose, hier. So etwas muss man MESSEN, dann zeigt sich ob die internen Schaltungen des FU ausreichend sind, oder ob zusätzliche Dämpfung benötigt wird. In Kapitel 6.11.2 geht es um Netzschütz und Netzsicherungen. Ausserdem wird ein Leitungsschutzschalter der Charakteristika B, bzw C empfohlen. Das solltest du UNBEDINGT zur Gerätesicherung (und passend zu den Nenndaten deiner Gerätekonfiguration ) vorschalten. Keine Ahnung was da oben schon wieder gefaselt wird (siehe 300mA). Es kann sich aber nur um etwas handeln für das es bei uns sowieso keine VDE Zulassung gibt. Ausserdem widersprechen sich die Aussagen komplett. Sanftanlauf und der Anzugs-/Nennstrom deiner Konfiguration liegen weit darunter. Ist mir übrigens auch zu hoch, weil ich nicht verstehe, wie man vergessen kann, was man einen Satz vorher geschrieben hat ... Viel Spaß mit dem Geschoss, Marius:) ... und ich hoffe nach 2 Jahren hast du eigenständig einen passenden Leistungsschutzschalter eingebaut, ja?:) P.S.: Punkt 6 .... **facepalm** Dieser Gleichstromschrauber denkt doch ernsthaft, dass die Drehzahl Spannungsabhängig ist. Das ist zum totlachen. Da sagen sich doch Generatorprinzip und Asynchchronlauf lachend gute Nacht ... die anscheinend keine Bekannte von ihm sind:) For the others: BTW the operators and installing handbook for the MOVITRAC B(mc07b0030-5a3-4-00) is freely available, even in English. So please RTFM, before you guys tell more fairytales. I can't stand more laughing. Please! (Strange that this collection of "peasant wisdom" has not been laughed at or criticized before ...) Anyway, please don't kill yourself or others with that kind of "expertise". Two years late? It is never to late!:)

I think the thing that makes Marius special is that he not only has the creativity to build the projects he does, but also the inventive genius to create the tools that will help him build those projects. There's a lot going on inside that head!

Marius: Yeah, this should be enough Also Marius: *It wasn't*

Marius; your aptitude for traditional woodworking as well as very modern electronic technology is impressive. Love watching you work.

Didn't even notice when 29 minutes passed. Great as always, Marius!

Hi Marius - Great job implementing the VFD to the bandsaw. As a former drive designer, I have a few tips for you. Perhaps you thought of this already. With regard to the braking resistor, I would suggest putting a metalic grid over the resistor with a connection to your Earth ground (or do you call it PE in the fatherland? :) ). Anyway, this will do two things: 1. Keep any kind of flammable material from coming in contact with the resistor body (except sawdust) and 2. Prevent you from touching the case and potentially receiving a shock. Not sure how your resistor is configured, but many times one end of the resistor is connected to +UDC of the VFD bus and the other end is connected to GND of the VFD bus when the braking chopper (IGBT) is turned on from the drive. Even if the resistor element is "insulated" from the metalic heatsink, there could still exist a large common mode voltage which could give you a tickle in your body if you come in contact with it. Sorry for the very long explaination, just don't want to see any damage caused by the breaking, oops I mean braking resistor. OK how about you make a speed display so you can dial in the RPM of the machine ? Sending Best Regards from Wisconsin USA.

@MariusHornberger

3 жыл бұрын

Thanks for the tips! I don't want a display. That just makes you want to dial in the perfect cutting speed when it's not necessary and you could loose focus on cutting.

Another excellent contribution from the southern Germany precision workshop scene. I like Marius’ projects. On my Matthias Wandel inspired band saw I used a variable frequency supply for four years already. With good results. This set-up allowed me to avoid the belt and pully transmission. I mounted the lower wheel directly on the motor axle. Therefore, I never had problems with slipping of the belt on the pully as reported by Marius. The only drawback of the use of frequency variators lies in the fact that they must already be connected to the mains when you want to use them. This means that one often forgets to switch them off after use. Fred Casadei

That VFD looks so much better than all the ebay crap usually used for setups like this.

Thanks Steve for the smile on Marius face

Am I the only childish one that laughed when you said… My 3D printed knob 😂🤣 Great video as always and it runs so much quieter now 👍🏼

Excellent upgrade !! I just bought the plans for the bandsaw from Matthias - now I have to add a VFD to my shopping list!

Nice work! Just for your information, the 6 black wires for control buttons and knob are numbered (on the individual cable insulation), making things easy if you know or notice. At 19:39 you are almost pointing towards number 2.

@MariusHornberger

3 жыл бұрын

Oh fuck, i didn't see that...nor thought of that. But thanks for telling me for the next time

@timderks5960

3 жыл бұрын

@@MariusHornberger And for when you meet a cable that's not numbered or color coded, I'd suggest using a multimeter to check continuity before installing it, and labeling the wires. It's a bit more hassle than just testing in place, but it's usually easier and there's less risk of frying electronics.

@dj-bn1fj

3 жыл бұрын

@@timderks5960 Color heat shrink on each end over the isolation is less messy ☺

@timderks5960

3 жыл бұрын

@@dj-bn1fj Yeah, although you'd need quite a bit of colors for that. Colored heat shrink is also a form of labeling though, so I could say: That's exactly what I meant ;).

@-szega

3 жыл бұрын

@@timderks5960 The only cable I've ever seen where the wires were completely unmarked was cabling for alarm systems. But even those are marked - but on the inside. Four wires per cable, two are tinned, two are bare, so you have to cut it into it to tell what is what.

Wow, that's an awesome upgrade! That breaking works so great :D

Nice piece of kit😃good quality workmanship👏👏good job sir👍👍

Really nice. That new VFD looks like quality as well. Much nicer than the usual ebay VFDs you see all over (your first one).

Another great video Markus! Your explanations/installations have just the right amount of detail. A suggestion-make the STOP button easier to access in an emergency-a 3D printed addition would probably do it.

Maybe you didn’t notice, but the black wires in the signal cable are numbered ... 😃

Nice work all the way around! Thanks for sharing and keep up your great work!

there is a trick for the cable shielding. if you use a little screwdriver and open up the mesh, then pull the wires trough that opening. then you can cut the shielding in one cut or maybe better connect the shielding to ground. use a shrink tube to isolate it.. and about the cable with all the black wires. the wires have tiny numbers on them so you can identify which wire is which. and about the motor running the wrong way. if you just swap 2 phases, doesn't matter which 2. then the motor also runs the other way.

You are a genius. That bandsaw is brilliant.

Congrats on getting the fancy VFD. Nice band saw.

It is also nice how you made the drawing of the switch box. Greetings Ron

My new favourite channel!. I just love the clear presentation style... detailed without random waffle. Really easy to listen to. Brilliant content. Subbed here!

@thewolfin

3 жыл бұрын

Also notice the lack of jumpcuts, he really tries to get a good take without just cutting it up afterwards, and it shows in the overall quality.

@MariusHornberger

3 жыл бұрын

Thanks guys, I appreciate that!

This might be 2 years late, but "Steve" from SEW you are a pretty awesome guy for hooking Marius up like that.

I think it's about time that I going to build a bandsaw too. Not as complicated as yours is, but just a 20" or so. Thnx for sharing this video Marius. I enjoyed it. Very cool project!

Awesome upgrade. Thanks for sharing.

Die Beschriftung mit Motion Tracking sieht nice aus 😎

Thank you for a very informative video. Of course I enjoy every video of yours.

You have the patience of a Saint. Thank you so much for sharing your experiences too. I'm sure your next upgrade isn't an LED because that would be a 20 second video!! BUT ... perhaps a few LED's to brighten up the cutting area???

Job well done Marius very well done, engineer by trade here. The only thing I'd say it would need next is a forced ventilation cooling fan for the motor itself should you regularly run the saw at a lower speed since it's cooling fan is rigid to the motor shaft, which when not running fast enough can cause thermal issues with the motor, possibly trips or loss of power which you wouldn't want in the low end speeds, that is if you're not too bothered about the additional noise of an extra cooling fan running on the motor. Otherwise again very well done!

That final segment was funny!

Also of that actually made sense to me. Good job explaining.

Thought for motor cooling. Not certain of your model, but it might be possible to remove the end bell were the fan is, custom print a new one and add an additional DC motor with a temperature probe so it’s cuts on to supplement the existing fan when needed at slower speeds.

liked it. Very professional approach and bit... :-) challenging. well done

Nice work. good job

Wow! What a great saw now! May be the most expensive DIY Bandsaw ever built!

Marius the Boss. Really killer work MH.

12:19 "Braking the saw" means slowing down. "Break" means to damage or destroy.

@MariusHornberger

3 жыл бұрын

oops

@alucard87

3 жыл бұрын

I was wondering who will point this out :D

@BenMitro

3 жыл бұрын

It was a subconscious slip by Marius - he was aiming for the former but dreading the latter.

@AllenBrosowsky

3 жыл бұрын

Give him a break, he speaks at least 2 different languages.🤣

@michaeld_aus_b

3 жыл бұрын

as a German, I was also confused and had to think about what Marius meant 😅.

Hello Marius, I don't know if anyone has already commented on this, but I believe that the cause of you registering a greater amplitude in the 8kHz component when using a carrier frequency of 4kHz is this: the electric current reverses direction twice in one cycle and the vibration occurs in the magnetic core plates and in the motor coil at each current inversion. Therefore, the noise we hear will always be twice the frequency. Like in transformers at electrical substations, the noise is 100Hz (for a frequency of 50Hz). So it is coherent that the amplitude is higher at 8kHz. Thus I believe you can lower the frequency to 6Khz or something like that. Congratulations for another excellent video! Greetings from Florianópolis, Brazil. Miguel Moreto.

@hadinossanosam4459

3 жыл бұрын

That's a nice theory, but doesn't quite line up with the other spectra he showed: the 8, 12 and 16kHz ones had the base frequency as the strongest. (also my pedantic side would like to point out that even a pure 4kHz sine wave will change direction twice per cycle, and it's still only 4kHz... the doubled frequency appears only when we e.g. consider the absolute value or other nonlinear function of these direction changes.)

Very impressive work! 👍

Bossed that upgrade.

From the initial build to now this has become and awesome band saw. For me an easy to see display showing either motor rpm or if it is possible a display showing the blade speed would be great. I like to see how things are running but that's just me and if you are happy with this that's great.

Great video and a lot of great information, thanks 🙏🏻

When using a 3 phase input VFD I was told to use a AC-DC HPFI relay in the house, something about the normal HPFI relay getting saturated and not being able to turn off when it should. I asked an electric engineer if this really was necessary, and he answered by asking me "do you love your family?"

Great video Marius! It's really cool to learn about the VFD. You have a minor out of sync error on the clip at 28:30 where your negative twin reminds you of the belt-disc sander combo :D

Seeeehr cooles Projekt! Gratulation zu diesem Crossover zwischen Holz/Elektro! Das schreit nache einem Upgrade meiner Bandsäge, aber, wie bei dir - manche Sachen werden erst später erledigt - wenn überhaupt!😉👍

You may want to add something to prevent dust entering the VFD from the top, it seems pretty open. It's probably not that big of a deal, but it's nice to keep things clean. About cutting metal on a bandsaw that also cuts wood (and you probably already know this), be careful you're not dropping hot metal chips on very fluffy sawdust. Chances of a fire are extremely minimal, but fire really is no fun, so it's a good idea to keep wary about it. About not announcing projects: On one hand it could be a good motivator for you, if the viewers constantly ask "where is project Y". On the other, I can understand very well how that would be annoying as all heck.

@lmmartinez97

3 жыл бұрын

From what I've seen the VFD is made for an industrial environment, it wouldn't surprise me if it was an IP54 or 65 rated device. However, for the home gig, cleanliness tends to be more important than an industrial setting.

@vedranlatin1386

3 жыл бұрын

Bandsaws cut pretty cold, starting a fire with chips is not realistic, but it's something to keep in mind in case you do something stupid like run steel at woodcutting speeds.

@timderks5960

3 жыл бұрын

@@lmmartinez97 It would surprise me though. These things usually don't hang around in the open. The enclosures they're normally in are probably pretty well protected, but the unit itself? I'm not so sure.

@timderks5960

3 жыл бұрын

@@vedranlatin1386 It's not realistic, until it happens. Like I said: an extremely minimal chance, but it can happen, I've seen stranger things happen. Fire is something you really don't want to mess around with, so if there's even the slightest chance of it happening, you need to be aware of it.

@BenMitro

3 жыл бұрын

@@timderks5960 Perfect response - the funny thing about risk mitigation is it can only be successfully applied before an incident, not so much after.

Excellent, as usual. Thanks!

I used a eurodrive on my brother's Bridgeport mill. They're Excellent drives :-)

Nice job on the upgrade! Some small pointers: There are single insulated wires with higher voltages connected to the VFD. This is not good practice. They should be double shielded. In this case they need a cover. Also the not colour coded wires are numbered not always that easy to see but doable. Keep up the good work!

@Steamwormy

3 жыл бұрын

Yes I agree. I'm a sparky in Australia, and we would fail our exam for leaving single insulated cables and terminals exposed. I still think his workmanship was pretty good.

Great video, very interesting. And funny !

Cool! Good job man.

Variable TPI blades are so nice for metals.

Würde mich freuen wenn Du dieses Jahr noch die 300k knackst 👍🏼

good job

From a Smile to That Smile ;) great video as always.

Good guy Steve.

switching the drive wiring works to change rotation, but if the motor is running backwards you can also switch around some line voltage to the motor

Maybe space the VFD a bit from the frame (with wooden brackets) to help airflow? Also, you may have to create dust covers for the VFD, that thing looks really vulnerable to fine dust. For speed control feedback, have you considered adding a tachometer (mechanical or optical) to the perimeter of one of the wheels?

I have a small titan bandsaw that cuts at a regular bandsaw speed, Ive used a 24tpi blade to cut aluminium and brass, also wood for the par 5 years and it’s never been an issue. The only reason I’d use a vfd on a bandsaw is for steel or stainless etc but soft metals like brass and wood can be cut with a 24tpi or even 16tpi blade

Very good job 👏👏👏

I guess the break is also a good safety feature, perhaps worth adding an emergency button you can reach with the legs/knee or so

@jyvben1520

3 жыл бұрын

with a mushroom top, not like the current recessed "red" button which needs a finger, mushroom is very easy to push with any part of the body !

Now the ultimate upgrade would be to add strobe lights on bandsaw weels, like on SL1200-MK2, seen through clear wheel covers. For different preset speeds. ;) (Maybe the strobe light dots in "glow-in-the dark" paint ? ^^)

Excellent vid thanks

Very envious.

Outstanding work! “Simple installation”. Ha! Ha!

You should CNC your logo on the top bandsaw cover, it would look awesome

Hope next video is about belt disc sander or belt sander project, waiting on it. Please!

that braking resistor has the same shape as the old design of resistors we used in experiments in university. You could refine the resistance and make your own

Impressive, Amazing, Awesome! I only have superlative for your upgraded band saw. Can you give us the refs of the VFD and/or where we can find such hardware?

Steve seems SEW nice.

Having been thinking about buying an older 3 phase table saw which would require the used of a VFD, this was quite timely and as always, awesome. Going back and watching the "new wheels for my bandsaw" video its clear to see how far your presentation has come on all fronts. Please keep it up!

Good to have a Steve at SEW.

Dziękujemy.

Hey Marius, einen Tipp für das absetzen der Leitungen. Am besten immer diagonal über das Gehäuse halten😉 das reicht immer!

Using screws and CnC machine you should make a metal cover for the bandsaws wheels a high priority! With some decorative vents... 👍🏻

Great video! But how quickly would metals such as brass or aluminum wear out the blade?

SEW.....huuuuu, best stuff you can get for your saw 👍

Awesome!

Yay, you're using flux when soldering!

Having you stop yourself from pre announcing a project was so relatable 😂😂😂

Wow, VFD is impressive. That 4K whine would have been very annoying. So many additional functions accomplished by it. Essentially an entire new metal bandsaw.

Marius: Just for convenience, we'll call him Steve Steve: Not cool, Marius...

Fantastic video Marius, thank you. Just a quick note - at 28:30 'his' voice is out of sync with the visuals. That will serve 'him' right for telling 'you' what to do! :)

@MariusHornberger

3 жыл бұрын

Oh nooo, that must have been a last minute change I've done before rendering...

9:32 yay Schneider buttons! 👍 (Telemecanique and Schneider is the same nowadays)

@gaunerchen1729

3 жыл бұрын

But these are just imitations. You find these on ebay.

The things you use to enter cables to enclosures (Kabelverschraubung in DE) are called 'cable glands' in English

@MariusHornberger

3 жыл бұрын

Ah cool, thanks for the info

Very cool. I'm curious how the rubber on the wheels will handle this. Is there any issue with metal shavings getting in the saw? Are you seeing the zero clearance insert blocking most of it?

With a tool like SERVOsoft you can calculate the physics of the system, so you can finetune start/stop/break durations. You see the inertia mismatch etc, very interesting. I don't know exactly what the free version can and can't do though.

Very nice and useful upgrade. I also wanted this for my old drill press but was worried that at low rpm the motorfan would also be too slow for efficient cooling.. any experience here? Thanks 🙏

@MariusHornberger

3 жыл бұрын

No, the motor on the saw never runs this slow

Just thinking aloud, If you'd mainly use the bandsaw in 2 settings ( one speed for metal and another for wood) you could probably set up the electronics to use 2 different resistors depends on the push button you use to start it.

@MariusHornberger

3 жыл бұрын

Right, but I didn't mention that I will also use different speeds for wood. For good resawing you need a higher blade speed than for cutting out thinner shapes.

@fer662

3 жыл бұрын

@@MariusHornberger Makes sense, great job and super tidy!

16:40 These tabs are designed to be able to just break right off if you don't need them.

Hi Marius don't forget regularly blow dust's from inside of VFD, because dust's + humidity = dead VFD.

I think YT automatically does a low-pass filter with a knee around 17kHz, so the 16kHz sound example we hear is probably being rolled off a bit. As someone with tinnitus but no hearing loss, I'm pretty grateful for that.

auch wenns jetzt 25 jahre zu spät kommt aber als kleine mahnung, obacht bei metal spähnen, die werden ja gern mal bissl warm, net das dir mal einer davon die säge in brand setzt (bezogen auf die spähne die sich in die maschiene verirren)

3:36 Looks at pens. Doesn’t want pens. Wants springs 😂 lol.