That is the most exciting video I've ever seen. I watch it before working out or heading out for the night. I'd run thru a wall for this man.

The. Way to know if the spring is broken is the one hand lift , if you can lift the door with only one hand the spring is fine but if you need both hands and is really heavy? The spring is broke. Thanks for the video

very helpful thank you!

omg! i'm falling asleep with this one.

@ziyadzaitoun5277

4 ай бұрын

would you stop talking and show us something?

Hello. The door opens all the way with the wall switch both up and down. Springs were replaced this summer. However, my 4 remotes, 3 with new batteries, do not register either to close the door or open the door. So, by deduction, there seems to be some difficulty with the signal receiver on the unit. If not that, then what might it be? BTW, it is a LiftMaster. PS. There is no sound from the motor when I use any of the remotes. All the lights on the remotes are blinking reflecting that it seems to be broadcasting but the unit is not receiving.

@RapIsDeadly

7 ай бұрын

You need to program your remote fob with the opener. When you changed the batteries it reset your fob. There are youtube videos on how to program your remote...super easy.

@OneHumaneBeing

7 ай бұрын

I had replace the batteries in 3 of the 4 remotes. I tried to reset the remotes and the light blinked but none of the remotes worked even with new batteries. I followed online reset instructions and the links blinked accordingly but nothing. I suspect, based upon other videos that the circuit board is fried for receiving radio signals. I took it out and examined it and I didn't see anything but I am not sure what I'd be looking for. :-(

Both my garage doors Will not open and none of the breakers are tripped???

My problem is that my door will not with the remote or keypad. I can open and close fine from the wall and it will close using the remote but not open

@mdubb9621

3 ай бұрын

6 months and still no answer to ya problem!! I'm having same problem

I got a Raynor R170 from 94. The door closed but went to open it later on and when I press the button on the wall it makes a quick click by the motor and nothing happens. Same thing with the remote. It opens and closes manually. Would it be automatically locked, motor, or the circuit board?

@doortodoordesign1055

19 күн бұрын

I would guess circuit board...I would make sure the outlet is good too, I have seen that with a bad outlet as well.

Help please, I just installed a new genie garage door opener. Everything went smoothly. I was able to program the door up and down on the head unit itself. But when I programmed the wall button or tried to program the remotes, it will only open the garage door, but neither one of them will close the door. As in when you push the button, nothing happens, you can just hear a clicking sound. Any help would be greatly appreciated.

@abdladigun6436

5 ай бұрын

I'm having the problem right now, did you find a fix.

@Hillsidekman

5 ай бұрын

@@abdladigun6436 yes, I did fix this. So my issue was that I didn’t install the garage door sensors, the ones that you install at the bottom of the door to stop the door from closing if something passes through. I don’t have any small children or anything so I didn’t think I needed to install them but I found out with new garage door openers as a safety precaution they have to be installed and that fix the problem immediately. I don’t know if that helps…

@hainguyen7971

4 ай бұрын

I had Genie car garage door opener installed in 2022 and worked well ; however, a mid year of 2023 it was closing just fine while opening go up sometime well and other time not up on the way ! I checked all sensors, remotes, and Spring… were still working and good condition! I call cả garage door opener expect who came in and made an adjustment on it and a few weeks later happened again! What’s wrong can you tell please ?

Help! My Liftmaster 8010 has power to outlet but no lights coming on and not working, remotes or controls. Logic board?

@doortodoordesign1055

19 күн бұрын

Probably if the outlet has power

My garage door does not stop halfway on command from my clicker. But it stop halfway from the garage button. What could be the problem?

How can I lock. my garage by the pannel

@doortodoordesign1055

4 ай бұрын

Some doors come with an interior side lock that be pushed through a hole in the track to lock the door...if your door does not have one it can be added.

Can an opener just get weak with time… Mine is 22 years old; it opens a couple of feet, but then I need to help it physically. The springs look okay, and I have lubricated everything I can see.

@doortodoordesign1055

2 ай бұрын

Springs can wear out over time they may still be intact but no longer strong enough for the job. It should not feel heavy if you operate the door by hand.

How do I open my garage door with the remote locked inside?

How can I get in I have no door or window I was able to get a hanger and pull the red string nothing happened .help please

@doortodoordesign1055

19 күн бұрын

Probably have a broken spring...once you are sure it is disconnected from the opener you should be able to force the door up with a broken spring. You will be lifting the full weight of the door so it will be very heavy. You may need a few friends to help.

What if it makes noise but the door wont open

@doortodoordesign1055

Ай бұрын

Most likely stripped gears in the motor head.