I still cannot get over the fact that in addition to your high quality production and hardware knowledge, you are also apparently a gaming god. Holy shit.

@saiko361

Жыл бұрын

Thats why he is one of the only tech youtubers you can trust, when it comes to competitive gaming setups.

@MrJohannson

Жыл бұрын

Not too hard to improve to his level once you eliminate input lag and play at high enough frames, and I'm not saying he's not legit -- quite on the contrary -- but there is a reason no professional player runs a 60hz display and otherwise subpar hardware. Low input lag removes the handicap and lets your potential shine through.

@rustler08

Жыл бұрын

@@MrJohannson Actually, it is hard to get to his level...and I very much doubt you're anywhere close to his level. I know I'm not and I have had a low input lag setup like his for a couple of years. He's just built different.

@GeekProdigyGuy

Жыл бұрын

@@MrJohannson That's BS lol. Vast majority of players got good on cheap-ass hardware while still living with their parents or going to college. Pretty sure that's true of this guy as well. The fancy low latency stuff came after because you start to notice the lag as your reaction time gets faster.

@Assassin5671000

Жыл бұрын

Or maybe he is just making videos of the times he wins a fight and doesn't show any of his loses ,correct me if I am wrong or you see him streaming and being consistent with his gameplay

2:38 Dyson hairdryer …… That’s how Ali gets that perfect piece in every video 💇‍♂️💆‍♂️

Your clean, monotone setup never ceases to amaze me, and it makes me feel comfortable and relaxed without even being there.

@DuBstep115

Жыл бұрын

Clean? wired mouse, keyboard and headphones 🤢

@sammason2334

Жыл бұрын

I think you mean Monochrome

@Eskmo42

Жыл бұрын

@@sammason2334 eh same thing

@Dranzer2024

Жыл бұрын

@@DuBstep115 nothing wrong with that and his setup is way better than yours anyways 😆

@DuBstep115

Жыл бұрын

​@@Dranzer2024 Better how? He can't even go to fridge while wearing headphones. Automatic 0/5, also no Genelec speakers 0/5

Update! I swapped the keyboard PCB to the one from the Wooting 60HE. Video here: kzread.info/dash/bejne/maCFsKebmJqfqMo.html Also few questions on monitor - currently using the Acer Nitro 390Hz for competitive stuff, but probably switching to 1440p/270Hz when new GPUs come out!

@erikj6351

Жыл бұрын

Is there a monitor that has 1440p and 270hz?? What’s the name in that case

@samuelburnett6811

Жыл бұрын

What do you think about Skypad glass mousepad?

@thiplouv

Жыл бұрын

@@erikj6351 Acer Predator XB273UGXbmiipruzx (yeah that is the real name lmao). Optimum did release a video about this monitor.

@sebastiensales1733

Жыл бұрын

what mousepad sponge do you use. I use the soft variant

@Anthony-en5ov

Жыл бұрын

@@sebastiensales1733 hayate otsu soft. he said it at 3:00

Since you're still into 60% keyboards, I would suggest picking up a Wooting 60HE and just transplanting it into your Tofu case and use the blank keycaps. It'll still look like your custom but will be higher performing for gaming.

@sushimshah2896

Жыл бұрын

That analog or optical one?

@Grimlo9ic

Жыл бұрын

@@sushimshah2896 It's analog, using Hall Effect switches (which can technically be considered mechanical, but are different enough to warrant their own category).

@houssamalucad753

Жыл бұрын

That would be optimal to keep up with the mouse

@crossbolt27salt88

Жыл бұрын

@@houssamalucad753 i agree good thinking, I use the GMK joystick for fortnite but there are other games were analog movement would be helpful

@masonv9333

Жыл бұрын

@@Grimlo9ic ehhh not really they are definitely mechanical

I love that you find something you like and stop going. It's much more practical for a lot of us who don't get gear thrown at us on a weekly basis 😅

Really nice clean setup dude, love the gear choices you made they all look nice and ties really nicely to your overall setup theme.

Bro your videos always answer the questions we have! Keep em coming!

You're reviews have seriously been an amazing journey for me since I think we share a lot of things when it comes to fps gaming, I also went custom mechanical keyboard but in a budget and I don't care about flexiness and such so I just got glorious gmmk pro and used the same switches you use, (lubed them myself) and it's been a game changer, like other things from yout channel. Thank you very much.

Nice and simple, just how it should be. Looking good man!

Awesome quality vid as always Ali 🥰👍. Love ya work 🤯🤩

Your style is unique! I love it!

Good on you for sticking with what works.

You should definitely try Wooting 60he :) You can mod it with tofu60 case too if you like... It is officially the fastest yet! 0.1mm actuation point and with the Tachyon mode you get less than 1ms latency. I would be really happy to see you test it :)

@optimumtech

Жыл бұрын

Definitely!

@billcipher534

Жыл бұрын

@@optimumtech It also has a mode can’t remember the name where you don’t need to completely let off the switch to reset it. Even if your actuation is set at 0.1mm. Once the keyboard notices you rising on the switch you can instantly press down again to activate it.

@BrendanChumney

Жыл бұрын

@@billcipher534 Rapid Trigger, its wonderful for rocket league and FPS games

@billcipher534

Жыл бұрын

@@BrendanChumney that’s what it’s called.

@KurtKloetentreter

Жыл бұрын

@@billcipher534 Rapid trigger, it’s by all means the best feature a gaming keyboard has ever had.

Your layout is so clean sir!!!

I like that you are content with what you have and the setup is very minimal. You have the means to upgrade peripherals, the means to buy the flashiest and most expensive products, yet you choose to stick with the basics and whatevers the most comfortable to you.

Can't lie Ali, the thumbnail alone is interesting. Ty for introducing me to iem's for gaming, but now i'm scared because i bought an m2k :p

Setup looks so clean and functional

Great video helped a lot!

the fact that the Zaunkoenig even exists makes me very happy. The mouse market has become far too oversaturated with giant companies trying to out-safeshape eachother with little to no innovation outside of weight reduction and sensor speed. the fact these two german dudes managed to top the charts on BOTH of those while also innovating in shape and ergonomics is incredible and honestly gives me some German pride.

@samuelwhite3173

Жыл бұрын

I mean it’s $300, it should be the best based on the price. And low weight != best.

@MattySagz

Жыл бұрын

@@samuelwhite3173 that price is insane to me holy moly hahahah

@MattySagz

Жыл бұрын

@BrandoRando dunno what h2 is but i just got the x2 Mini

@MattySagz

Жыл бұрын

@BrandoRando ofcourse makes perfect sense i totally understand i really should buy one without a doubt

@jupper5080

Жыл бұрын

@@samuelwhite3173 there is no best mouse its all preference... and it is the best for input lag...

Love it! That mouse looks nuts… definitely a hands on experience needed lol Definitely in need of a new mouse pad though

Very interesting setup, by far the cleanest ever

Really inspiring setup! The lack of RGB feels good

Insane gear mate!! Gotta say that I can't agree more with you picking gateron black ink, they are so so nice

This is my 4th time watching this vid and it feels like this is my first time watching it , love it

🤩🤩🙌🙌 Awesome video ali i love you content 🙌🙌

If you want to soften the metallic sound signature of the Tofu, look up Keybored's 'spring mod', where he basically mounts the PCB on springs, almost like car suspension.

Really like the simplicity of your setup. Like someone said before, the lack of RGB is refreshing.

I decided to get the IE 300s after watching this video and your IEMs for Gaming video and they’re amazing. I bought them on sale for 200$ on amazon and I’m so glad I did. Thanks for amazing reviews, they never miss.

@whyver7773

Жыл бұрын

Hey, can you tell me how is it performing in game ? I know that Fresh Reviews is not satisfied at all with IE300 playing tac shooters like Valorant and else so I was just wondering what about you

For the Wave XLR and IEMs, the Elgato software actually has a low impedance mode now for lower impedance ear/headphones. Could give that a try, otherwise a ground loop isolator should do the trick as well in getting your IEMs to work.

super clean and satisfying setup to watch, presented in a perfect production thank u🤍

damn everything is slick and clean!

I bought the kz zs10 pros after watching your other video on IEMs and I have absolutely fallen in love with them, I got some aftermarket tips and cable and I now have my endgame audio setup, I never thought I would use IEMs over headphones but you have changed my audio experience forever through that recommendation.

@Tony-ui2sl

Жыл бұрын

How good are they? I'm planning on getting some iems soon aswell

Such a mad setup

that keeb just looks to be pure perfection, clean and nice

I got IE 300 just because of your videos and this is the best part of my setup, absolutely loving these IEMs. Super light, no discomfort at all and the greatest part is that i dont have a huge headset on my head (especially makes sense when its summer) and i also get better mic quality with separate mic.

@karmaQT

Жыл бұрын

@@gratus8811 I use the ifi zen deck v2

@whyver7773

Жыл бұрын

Hey, can you tell me how is it performing in game ? I know that Fresh Reviews is not satisfied at all with IE300 playing tac shooters like Valorant and else so I was just wondering what about you

@MaxKuznetsof

Жыл бұрын

@@whyver7773 Im doing just fine tbh, csgo is pretty good and new wz is very loud after they updated steps volume (cant tell about val cause i dont play it). I would say 8.5\10 for ingame sounds.

@whyver7773

3 ай бұрын

@@MaxKuznetsofwell I got them but I seem to have issues with footsteps coming from behind, do you have any windows settings resolving that issue ?

@MaxKuznetsof

3 ай бұрын

@@whyver7773 hey man, I run xenns top with topping dx3 pro+, I’m afraid I can’t help you with your issue, I didn’t had that when I used ie300.

What's amazing to me is that you have favourite piece of gear that you stick with for so long, since you must have sooo many upgrade options available to you at reduced costs or at least claimable as tax deductions!

nice 1! really love yer videos

great video once again

Definitely recommend checking out o-ring mount and different plates for your Tofu! The harsh and stiff typing experience is partly due to the brass plate and tray mount

the keyboard i think is accualy a 65 %, REALLY nice set up really would like to have something kinda like it, and the matching black mate is really nice too, nice job!!

I done thought that mouse was a joke

@leoncalero4072

28 күн бұрын

I wish we were all as real as you

For IEM cables, I've always had trouble with MMCX cables and connectors in general, audio cutting out, outright dying, etc. I moved to 2 pin IEMs a few years ago and they are lasting me a lot longer.

@crossbolt27salt88

Жыл бұрын

I want to try out iems for gaming

@BeHappyTo

Жыл бұрын

any recommendations?

@crumpledmint

Жыл бұрын

@@BeHappyTo moondrop aria if you are going for the cheapest audiophile experience

@CosmicApe

Жыл бұрын

​@@crossbolt27salt88 Do it, it's a great experience. There are a lot of good sounding IEMs out there and the sound isolation you get with them is awesome. Also, you feel so much more "lightweight" when at your desk without big and bulky headphones on you all the time. I made the switch to IEMs with the Moondrop KXXX and I don't know that I'll ever see the real need to go back to headphones. It's also nice to have something that I can easily use for both personal stuff and work and it looks good for both settings.

@crossbolt27salt88

Жыл бұрын

@@CosmicApe I know. I sometimes use my airpod pros for gaming because they are wireless and feel great, and I know that iems will take it to the next level

I own some hörluchs in ears, basically the same design as yours and it was a game changer for me as well. I'll never ever go back to over ear headsets.

have really enjoyed discovering your channel, you're motivating me to build a new water-cooled mini-itx rig as an old-timer. I did have questions on other pieces of gear we see: 1. what is the cool RGB light tube we see everywhere? 2. what monitor arms/mount do you use? does it allow for stacking? 3. what microphone do you use to record your videos? The quality is amazing, I believe I've seen Sennheiser? 4. what lighting do you use? 5. what video camera are you leveraging? Thanks again, have truly enjoyed your content!

So Ali I actually just bought the £49 KZ ZS10 Pro IEMs based on your video on them! They sound amazing but I do get a static hiss when using them in my Evo 4 actually. Reading about IEMs tells me it's because they're sensitive enough to pick up the smallest electronic signal from the EVO 4. This is probably your issue with the Elgato amp you tried. I have fixed the static issue by buying the iFi iEMatch+ dongle which reduces the electronic signal passing to the IEMs. They still sound great! Also, I use the Shure MV7, the SM7Bs younger brother, and added a Klark Teknik Mic Booster to get the extra gain via XLR. MUCH cheaper than the Dynamite.

@SUPER8ALTERN8

Жыл бұрын

Klark Teknik Mic Booster - yes, so many people throwing away money on a cloudlifter when you can get much much cheaper that are 99.9 identical

@WinnieBlue

Жыл бұрын

Pretty sure this one post just saved me hundreds of dollars trying to fix the white noise in my ZS10 Pros, and low gain on my Rode Procaster. Thanks heaps

Nice to see you’re still using that mouse. I’m on the verge of buying one myself, I’m just waiting to hear back from them.

@HeyNavi

Жыл бұрын

If you are patient enough, wait on the m3k (comes out late 2023). I’m in the discord and they said the cable will be improved significantly because the cable on the m2k is pretty bad and people definitely feel the drag. They claim the m3k’s cable will be as good as a wireless mouse (feels like there’s no cable) and even though they do plan on making a wireless version at some point when it’s possible, they say it would be kinda pointless because of how good the cable will be. I’m taking their claims with caution but even if it’s not as good as they claim to be, any upgrades from the m2k cable would be worth it imo.

@Inconsistense

Жыл бұрын

@@HeyNavi Hey, Thanks for letting me know, I might have to join the discord! Also I guess if they make it wireless it will add to the weight too, and that's the whole reason I am getting it to be honest, unless they could make it only add a few grams but just have to wait and see. Thanks again!

@HeyNavi

Жыл бұрын

@@Inconsistense no problem and yeah the battery weight is an issue they’re holding off until they can stuff it with batteries that hardly add any weight. So when (if) the wireless version does come out, I wouldn’t worry about the weight because their philosophy is to keep their mouses as light as possible and I’m sure they wouldn’t use batteries that contradict their philosophy.

that mouse is absolute fire

I bought the IE300s on black frday for 150$ because of you! Thanks!

damn that's a super clean black n white setup.

I love clean black and grey setups. I have a few RGB sources on mine but they're all set to blue.

Respect for the mouse choice; i like the zero compromise but im a big mouse guy to keep my hand from hitting the table as i palm grip

Massive W as always for Ali

D&B in a tech video, let's gooo. Nice one

Hey great video, one thing with your tofu60 is you can oring mod it for a much less harsh feel and sound and some actualflex

I also got ie300, picked em up after your vid btw, also very happy with them. Though I had one issue with them, after a couple months audio just disappeared from one ear. But in just a week I got a replace unit from sennheiser. So, if anything like that happens, be sure to contact their support)

@DW-jn3cz

Жыл бұрын

I had the same problem iam in love with the iems but i had the same Problem 2 Times ...But luckily ordered through Amazon and it was always taken back. Am afraid to order them again to have the same problem again after a few days / weeks

@poeticsilence047

Жыл бұрын

Get IEMs with 2pins not the MMCx, i think what it is.

@kyle-vj4lx

Жыл бұрын

might be clogged filters?

@sm1le0hd

Жыл бұрын

@@kyle-vj4lx no, something inside the thingi broke, 100% sure

@kyle-vj4lx

Жыл бұрын

@@sm1le0hd damn thats unlucky

Audient Evo 4 output impedance is measured around 22ohms, which does well with headphones over 150ohms, the IE300 is 16ohms and therefore changes the frequency response when connected to the Audient Evo 4. I recommend the Motu M2 which output impedance is measured at 0.07ohms much better suites for low ohm IEM/Headphone.

I like that you acknowledge people maybe being irked by certain pieces of gear but then reminding everyone that this is your setup and that it's more than satisfactory.

Amazing vid as always 👍👍😁, where do you get those wall papers ?

Yo i followed your setup and got the evo4, it was so good i wanted it on my 2nd setup as well but it was sold out. I then got the audient id4 and to my surprise it sounded even better. It takes the sharp edges off and cleans up the overall sound without compromise. Just wanted to let you know that.

I'd be really interested to see you do a new keyboard build using the new wooting he keyboard PCB and doing some testing with those Lekker switches. Saw another YT channel cover it and have to say it's one of the coolest things I've seen out of the key oard industry recently. Would feel like technological match to the Zaunkoenig mouse you've got.

nice setup i want the kbdfans tofu60 so bad

Hey Ali! Can you review the new Silent Wings 4 fan? You da man 💪🏼

Love the setup, two questions though, what is your preferred monitor right now and where did you get your keyboard cable?

these vids cheers g

ur my inspiration bro

Little of topic, but your hairs looks so much better than last time i watched you!

Hello from indonesia ,love watching your channel😄

You need to review (and then main) the Wooting two 60HE. That keyboard with the M2k is endgame.

Second and love the content keep it up! ❤️

hey i love your setup. Iems i would also recommend would be the blon bl03, cca cra, and the final audio vr3000.

that mouse looks amazing for my taste. however, i need mouse buttons :/ also costs a ton but im sure its amazing. i currently have been using the mz1 and have been loving it for months. great video as always.

@microwavegommmm916

Жыл бұрын

Hsk plus ace maybe

@neonoir__

Жыл бұрын

Yeah, sucks that it's such a niche product, would love to see a wireless version with 2 side buttons. Oh and a cheaper price :/

@minutenreis

Жыл бұрын

@@neonoir__ G-Wolves hsk plus once again 38 g, wireless, two sidebuttons, pretty similar concept (though with a bit different execution)

@95blacktigerable

Жыл бұрын

@@minutenreis but not possible to buy anywhere, atleast europe :(

you gotta try the new wooting keyboards, i think you might appreciate the engineering involved in it and the slight competitive edge of the hall effect :o

I just can't compromise my mouse not having side buttons, and I'm a palm-claw gripper. The ultra light mouse market is already lacking in big or ergo mice, I hope Zaukeonig comes up with something like that. I think you can cut the top middle of the mouse altogether with and just have the back and front for palm support, connected by the sides. Currently using TUF M4 Air.

Having the whole Sennheiser IEM lineup i can say you should try the IE900 for sure. These basically made everything else obsolete for me and they are basically the perfect version of the IE300. Its expensive yeah but it brings joy to me every day. More then anything else in my setup i would say

@mob9900

Жыл бұрын

hey man i been using oer the eas senhesier for years and really like them . im looking in to iems , how does the sound compare to the big boys ?

@mob9900

Жыл бұрын

1500 euros holly shittttt

What’s your bicep setup?? 😮 Great video btw!!

Hey mate, the reason you’re getting the static noise on the Wave XLR is because IEMs are usually low impedance/sensitive and the DAC/AMP in the Elgato may have a high output impedance. If you do look into replacing it, you’ll need to find a product with lower output impedance. Also, aftermarket cables are the way to go with the IE300, Tripowin Zonie or C8 are great and can be picked up for under A$50 on Amazon. Kinera makes some comfy and quality cables too but they’re a lot steeper. Koala Audio Cables makes really nice customs (at least my for my over ear HD600s).

9.8/10 looks good overall just too expensive. Nice job man.

@terva818

Жыл бұрын

his mouse costs more than my monitor, mouse and keyborad combined

@ACE112ACE112

Жыл бұрын

@@terva818 what monitor you got?

@terva818

Жыл бұрын

@@ACE112ACE112 ASUS TUF Gaming VG24V 144Hz, I paid 180€ for this

The only tech youtuber who is actually good at games 😬

Would love to see you using an Azeron keypad, they so OP compared to normal keyboards. And they just released the Cyborg Compact! Thinking of upgrading from my Classic Compact... AZERON FOR THE WIN!!

Hey man, I had the IE300, and had the same issue with sound cut out. It turns out, it was actually the connection to the driver inside the bud. The adhesive they use to secure the bud together isn't that strong, and mine ended up falling apart! Thought I'd let you know, in case you still get the audio cut out when you replace the cable. I'm now using the Fiio FH3, really happy and the build quality and comfort is superior to the IE300 IMO.

Excellent and clean review as always. I would add a word of caution for those switching to in-ear earbuds for gaming. Some fps games have very loud spikes in the volume (gun shot, getting hit etc) which may consequently hurt some people's ear drum in the long run due to the enclosed nature of earbuds. I ended up with tinnitus from using earbuds and only recovered when discontinuing using them for like a month.

@joelconolly5574

Жыл бұрын

true. Those shots are hard and pointy. Very bad for the ears. I'm rocking the Apple Earbuds (3.5mm version) and that one has pretty good balance of a driver compared to my 2nd Sony earbuds. But if you can't handle the sound of it I think headset is the way to go. I'll probably get one that's suited for better spatial detection. Otherwise, earbuds sre plenty light.

@MrStarpeto

Жыл бұрын

I play a lot of CSGO, and I recommend you to use loudness equalization, it lower the high volume stuff and enhance the low volume stuff, you get both less disturbance from high volume sounds like rifles spray or AWP shots while enhancing far away steps and small noises, it feels almost like a cheat code for the sound profile of tactical FPS! (you might loose just a bit of spatiality, but nothing that will hinder your pin point precision)

@RiceCubeTech

Жыл бұрын

@@MrStarpeto good tip!

@granttcg

Жыл бұрын

If you have your iems plugged into an amp you can adjust some of that high peak, so your ears don’t bleed every gunshot 😅

@savifrank6323

Жыл бұрын

@@MrStarpeto It also ruins directional audio in 80% of games

Insane peripherals! Question though do you constantly switch between like mice, keyboards, and headsets to test the gear out say for content or for the company

YOOOOOOO, I'm surprised I didn't watch it sooner

Interesting about the white noise in the Wave XLR. I have a Focusrite Scarlett Solo and was looking to get a Wave XLR instead because of the amount of white noise I'm hearing using my IEMs (KZ ZS10 Pros, awesome recommendation by the way!) Perhaps I'll look at getting the Audient interface if there is no white noise in the IEMs. 🤔

I've had a few pairs of Shure se215 iems which have a similar rotating connector to yours. All had the same issue. Have now moved onto various kz earphones with the non-rotating cable and it's much better.

@poeticsilence047

Жыл бұрын

and they sound amazing. Can't get over how great IEMs sound. Reason why musicians use them.

@SatchmoBronson

Жыл бұрын

@@poeticsilence047 Musicians use IEMs because of sound isolation (they're often custom-molded) and their unobtrusive look on stage. IEMs don't have inherently better sound quality than over-ear headphones.

@poeticsilence047

Жыл бұрын

@@SatchmoBronson My mistake. I should have know better especially since I also have over the ear headphones that I love. Lol

Great video! What sensitivity do you play in different games?

Was gonna say you should try a polycarb in your tofu, and then you went ahead and said the same thing. I find it perfect for that board, especially with some oil kings

5:47 It's due to the resistance/impedance of the IEMs. The resistance of the IEMs is higher than the wave XLR is able to output, creating white noise. On Elgato's wave xlr specs-page it reads: Maximum Headphone Port Output Level 77 mW @ 16 Ohm The IEMs I have checked out lately have a resistance of at least 30 ohms, meaning to power these IEMs, more power is required from the DAC/interface to the IEMs. As I understand it, its like putting a car in high gear (your IEMs resistance) at low speed (Your DACs resistance) and trying to get up a hill (Produces white noise because struggles). Your EVO 4's headphones out port supports up to 50 ohms, where the DAC output (on the back?) supports up to 100 ohms. I own a Roland VT-4 that I use for my setup, my headphones output support 24 ohms, meaning my KZ ZS10s produce some white noise while using it (these have a resistance of 30 ohms). The back of the VT-4 supports up to 1000 ohms, and while using the back I experience no white noise at all.

@trench6118

Жыл бұрын

I have noticed a lot of white noise with the wave XLR using my thieaudio monarch mkIIs. I grabbed it when my motu m2 stopped working since it was available locally, but I really do need to swap it out. What is the point of having nice IEMs if everything sounds so messy

@saiverx

Жыл бұрын

@@trench6118 Exactly. I'm glad I own my VT-4 interface with the support for higher impedance, else I'd have to invest in something else... Like you did, I experienced white noise while using the aux on the front, so I switched out my interface for the Scarlett Solo (2?), And these had less white noise but still noticeable when no audio is playing...

Good luck finding an aftermarket cable for the ie300. Sennheiser uses a deeper mmcx connector. The only way you’ll get an aftermarket cable to work is mod the ie300s by cutting off the red/blue rings. If you’ve already done that, then you should be ok with aftermarket cables

I love you keep up

dayum boi, das nice

Yo if you like the M2k for it's weight you should give the G-wolves hati HSK+ a try it's a pure fingertip mouse as well.. extremely comfortable. has side buttons and is wireless!

From what ive heard online and from friends is that if you clean your mousepad regularly as soon as you notice the bad spots, it actually works fine with the superglides again.

dat hairdryer test

Hey man, really enjoy your channel. I was wondering - with all the 40 series rumors - getting a little nervous about hardware out growing the SFF space. With rumors of needing 1000+ watt psu’s. I was wondering what you are doing now - if anything to prepare for next gen. Should I be looking at moving to a mid tower? Upgrading to a 1000w psu?

If you could do your ergonomics for a new setup as well as updated desk setup that could be just amazing. I've watched a lot of vids and I can't find myself comfortable at all even by having amazing desk and chair. Thank you in advance

Love moon drop arias

Can you please do a review of the Logitech MX Mechanical? Looking for a wireless keyboard suitable for competitive gaming via wireless but also looks not gamery, this one seems like the most promising solution. Great work as usual

If you're going to get new IEM cables try the FiiO LC-RC MMCX cable, I tried a few and they wouldn't fit the Sennheiser since they have a slightly different plug. I had to shave them down slightly but since doing so I've had no issues and they feel great, fit well and the cable is secure