Отличная работа, отличный плуг.👍

I always look at yours videos. I think they are very interesting. It's interesting what things you find in scrap :)

Well done field look good hope not to much damage on the first tractor take care be safe

Więcej wrzucaj takich filmików .Pozdrawiam;)

Super filmik :-) Pozdrawiam

@hrz4x4

5 жыл бұрын

Thanks.

@3pdraiwer750

5 жыл бұрын

M T Z 8 2

Трактор отлично выглядит для своих лет, да и работает отлично, сейчас такого качества нету . Лайк и удачи вам !!!

@184denDenisMECHANIK

5 жыл бұрын

Согласен с тобой

@184denDenisMECHANIK

5 жыл бұрын

У меня трактора тоже 1991 года и выглят как новые, хотя и в работе постоянно

@Mafioznik_93

5 жыл бұрын

трактор норм только овцы не могут завести!9 надо с места быстрее заведется!

@vanger525

5 жыл бұрын

С охотником соглашусь

good work and very good plow

Good job! 💪👍

Very good job👍

Great video! Yes, theese kverneland ploughs are very old, but good, and reliable. We have estonian plough MA 3-35 and it has all kverneland active details, so it's easy to find replacement details

@hrz4x4

5 жыл бұрын

Thanks. Looks like it might just work if I install some new parts on it and learn how to plow (better).

@agrokanals

5 жыл бұрын

@@hrz4x4one more thing, that this plow has small mold boards, so the working width per furrow is 30cm, if I understand right, but there are bigger mold boards, which, i hope, can be mounted on this plow and then work width will incrase to 35 cm per furrow

@warrenblain2365

5 жыл бұрын

@@agrokanals The working width can only be changed by a different beam set up to let each body take more land, as in a vari- width, or of course adding more furrows. A different board type may leave a wider furrow for the tyre but not increase the working width. You both probably know that, but it is a common misconception. Meanwhile continue to have fun farming. Narrow tyres will always make a neater job.

@agrokanals

5 жыл бұрын

@@warrenblain2365 well, you're right, I was mistaken a little bit about theese mould boards, just because it's my second season plowing, so I excuse for that what I said. But yes, practise makes perfect

@warrenblain2365

5 жыл бұрын

Keep on enjoying what you do.

I enjoy in your videos ! Realy nice job .

@hrz4x4

5 жыл бұрын

Thanks.

Nice plow😃👍🏻

Good job :D

Aha, a "Kverneland"-plow, it will probably serve You well for many more years. They are quite good and robust plows. BTW, I had a really good laugh when I saw the attempt to tow. :D

What a nice soaked field. In my country, end of summer and autumn is dry, we had no decent rain, plowing and sowing season already started, and it' s very hard to manipulate with fields. God knows what Barley and Wheat we will have next summer

@hrz4x4

5 жыл бұрын

What county is that? It's wet but not very and no frost.

@Tankyard

5 жыл бұрын

@@hrz4x4 I'm from Serbia, northern part between Hungary and Romania

@Tankyard

5 жыл бұрын

Forgot to ask this MTZ which you used for plowing is your third tractor?

@hrz4x4

5 жыл бұрын

Yes. It's my third tractor.

@Tankyard

5 жыл бұрын

So we can expect new restoration series on your channel :-)

Finally new video ;) !

For the 1-st time it's ok ;) Greetings from Lithuania !

@dovydasleveris3809

5 жыл бұрын

Dr. Zoidberg Zdarova

@zoidberg552

5 жыл бұрын

@@dovydasleveris3809 Labas, kas ta zdarova ?

@dovydasleveris3809

5 жыл бұрын

Panasiai kaip labas

@zoidberg552

5 жыл бұрын

@@dovydasleveris3809 Supratau :D Labas :D

My first plowing was last year, took a while for a small field as my old McCormick b250 kept wanting to overheat, BUt Engine rebuilt a few weeks ago and coolant flush like mad its pretty much a new engine :)

@hrz4x4

4 жыл бұрын

Same here. The first hard work showed the real flaws on the tractor(s). I lost my radiator with the very first hard work etc. But they are workhorses and they should be used on full gas and also on heavy conditions.

1:50 that sound...I Like

@hrz4x4

5 жыл бұрын

Yes. That engine is very good. In full throttle the oil pressure is constantly 3 bar. Unfortunately gearbox needs repairs.

@ezizmusayev3761

5 жыл бұрын

Bellaruss80

@dovydasleveris3809

5 жыл бұрын

Eziz Musayev its a 82 because its 4x4 and we have belarus 1025 turbo, 80uk 80l 52

How big was the field ? How long did it take with that 3 bottom plow ?

Вот это сила!

great video! i would suggest changing the shares on the plough as they look very worn

@hrz4x4

5 жыл бұрын

Thanks. I agree, the plow needs some attention. But I wanted to have some experience with it before I start fixing and messing around.

Плуг интересный

If only I had an Belarus 82, but I'm very content with the T-40am though I'll have to get the clutch all checked and fix some oil leaks

Thanks for posting another great video. That plough was a lucky find! I am intrigued, when you filmed around the cab and showed the hydraulic controls on the right. Is that standard or a modification? I run a 50 and a 52 on my smallholding, and as you know the gubbings are all under the seat controlled by linkage from the steering column.

@hrz4x4

5 жыл бұрын

Thanks. Yes, that's standard configuration for 80/82. The distributor is connected to the back wall of the hydraulic reservoir under the steering wheel and controls are on the right. You can see see configuration better in this video: kzread.info/dash/bejne/iq6Yl7OTo62alpc.html

Nice

how i set may plau when you go in furrow/ chanel plau must be 90 degre upright, first furow can not mowe more dirt then second and side plate at end must toch dirt first plau must hang litll bit

@hrz4x4

5 жыл бұрын

Thanks.

Great job you have done! What happened to the front axle?

@hrz4x4

5 жыл бұрын

I don't know yet. Just took the other tractor and finished the job. I can still drive it but I hear some clonk-clonk in the right side knee joint.. It's going to be another part of the restoration videos :)

@traktoristsjenotc5996

5 жыл бұрын

@@hrz4x4 Probably broked those teeth of the axle. Here is the example of the axle-- www.traktors24.lv/lv/Catalog/PrieksejaisTilts/VelkoshaisTilts/Product/2089 These are the weakest places of the whole front axle.

@hrz4x4

5 жыл бұрын

Probably. The knee joint was quite bad anyway and needed my attention. The other side has been open and repaired (by the previous owner). kzread.info/dash/bejne/qnZnxLOyeKjYmqg.html

KZread - универсальный учебник

nice :)

nice front wheel they go wiggle wiggle wiggle

@hrz4x4

5 жыл бұрын

Yep. They wiggle until you do this: kzread.info/dash/bejne/qnZnxLOyeKjYmqg.html

Plowing is nice job

@hrz4x4

5 жыл бұрын

It's always good to be in the tractor and see the ground turning over.. And I am not doing this with a shovel or behind a horse - great.

@hxnn777

5 жыл бұрын

@@hrz4x4 yeap

По нашей глине с камнями стойки отвалов наверное прямыми стали. Хотя тоже дерновину пашет.

👍делай больше видео

Приветствую! Куда пропал? Давно не было новых видео

Which is this tractor?

maybe front axle broke because its not synchronized with rare axle because of the tire dimensions ? im just thinking :)

@hrz4x4

5 жыл бұрын

maybe. or I just knew that it's not top notch and predicted it happening here: kzread.info/dash/bejne/qnZnxLOyeKjYmqg.html

@perkele6466

5 жыл бұрын

It's a big problem when you put on bigger and diferent wheels and then sometimes your front axles shaft is destroyed.

You got nice scrap yards in country.

@hrz4x4

5 жыл бұрын

I honestly did not think anything about this plow before I had plowed some hectares and started to figure what the brand and maker was. It was a surprise for me also :)

There are very few MTZ 4х4 in Bulgaria. In Bulgaria we have a tractor called "Bolgar TK 80" based on "MTZ 80". The difference is mainly in the cabs.

@hrz4x4

5 жыл бұрын

Very interesting. 4x4 versions are quite expensive then I guess. And you have hi and low gears in transfer box?

@svilenkostadinov4644

5 жыл бұрын

The price of the front drive axle with everything needed for the installation is about 1500 euro . Bulgarian "Bolgar TK 80" like transmition is the same like the "MTZ 80" in your video. I do not understand what you think about transfer box. Мaybe I can not properly translate it.

@hrz4x4

5 жыл бұрын

Transfer box is the section before gearbox. Some versions of mtz have hi/lo (rabbit / turtle) gears you can select from there and some countries don't have that selection. Maybe you understand now.

@svilenkostadinov4644

5 жыл бұрын

@@hrz4x4 Yes, all of bulgarian "Bolgar" have hi and low gear in the cabs!

Really like your Video. Great job for first time. couldnt have done it better have also less plough Experience in total around 20 ha Why dont you make the video a bit longer about 10 min or so. it was really Funny that you mentioned you learned it from KZread 😁

@hrz4x4

5 жыл бұрын

Thanks. Well it's true that I watched a lot of plowing videos after first day on the field.. Then I leaned how to adjust the plow and how to plow - but it's all theoretical I need some practice now. The videos come as they are filmed. I usually don't want to make them too long so the viewers don't get bored. You think they should be longer?

@r3ddra259

5 жыл бұрын

Absolutly. especially when its sometime new on your channel. I really doubt any of your subber would be bored when you make them longer by this kind of cool new content 😉👍

Where are u from?

What is this 1:45 ?

Огонь

Which country?

Гуд видео

привет. хорошая вспашка с этим плугом, хорошо поворачивает борозду. Мне это нравится. Какая марка плуга? pozdrawiam-adam

@hrz4x4

5 жыл бұрын

Kverneland Hydrein: kzread.info/dash/bejne/faGD0Keed5a0p6Q.html

👍👍🚜🚜🚜⛽

Борозды как окопы)

Земля у вас торфяники?

Nice plowing. How deep is it? 25 cm?

@hrz4x4

5 жыл бұрын

Depends the field was very bumpy and plowing height is also very varying. I did not want to make it too deep. Mostly around 15-17 cm I would guess.

Какую скорость включил, когда дергали?

@hrz4x4

5 жыл бұрын

в основном 2 передачи, 3 передачи не работают, иногда 4 полуприцепа

@DauletK97

3 жыл бұрын

@@hrz4x4 следуюший раз второй трактор 9 скорость включите быстро заводиться

👍

мне показалось или в начале видео на горизонте был виден т40? этот дядя фанат русской техники?

Tere Mis kang see seal armatuuri all, käigukangi ees on?

@hrz4x4

4 жыл бұрын

Tigu/jänes kang. Poolkäigud ja tavalised pmst.

@robinaasa8579

4 жыл бұрын

@@hrz4x4 Aitäh

Это чтоб трава лучше росла?

What is that black thing at 1:45?

@hattifattener1

5 жыл бұрын

looks like camera tripod. just a guess.

@hrz4x4

5 жыл бұрын

yes. it's a camera tripod (which I never used during this video)..

@gumelini1

5 жыл бұрын

@@hattifattener1 I thought its some sort of hydraulic control unit 😂😂

Ктож так дергает,чуть собаку тросом не разделили.

I'm sorry for that old tractor ... you'll have to fix it. how old is that tractor

@hrz4x4

5 жыл бұрын

I don't know. They are both around 30-35 years old.

@Tankyard

5 жыл бұрын

Count on that MTZ was built tractors with small cabins until middle /end of '80, so from end of '80 beggining of '90 MTZ has made changes in tractor appearance and start to build in the big square cabins.

@juanmale8866

5 жыл бұрын

Ok thanks for the information

Hrz4x4 do you speek polish? Film super a like is up

@hrz4x4

5 жыл бұрын

Thanks. Unfortunately not. But I know how to use a translator :)

@satyamester4523

5 жыл бұрын

@@hrz4x4 😂

We have same type of plough.

@hrz4x4

5 жыл бұрын

Great. And are you happy with that plow?

@JussiValkila

5 жыл бұрын

@@hrz4x4 We've had problems with not actually turning the soil sometimes.

@hrz4x4

5 жыл бұрын

You used valtra to tow that? I am trying to compare tractors as I struggled a bit with narrow tires not delivering enough power to the ground.

Why you bought old tractors and restored them? You could buy new tractors.

Tänavu sai ise ka täpselt samasuguse adraga maa ära küntud. Kusjuures samuti esimest korda elus. Russi tagant vaadates peab vasakpoolse püsttõmmitsa pikkus olema 515mm. On väga suur viga sellel traktoril, mis rivist väljas nüüd.

@hrz4x4

5 жыл бұрын

Hea teada, et vähemalt ei ole ma üksi esimest korda adraga pusserdades... Kus see öeldud on, et tõmmitsa pikkus peab selline olema? Ma suutsin leida, et tõmmitsad peavad olema ühepikkused, rohkem mitte. Ma ei tea, mis seal esisillas juhtus, parema poole põlves tundub olevat. Ei ole veel lahti lammutanud. Lakkas vedamast ja tegi kolks-kolks. Õnneks liigub ja ei ole ratas plokis.

@deeremees1

5 жыл бұрын

@@hrz4x4 Mul naabrimees kogenud künnimees ütles, et vasakpoolne tõmmits peab olema 515 mm muidu atra korralikult kündma ei saagi . Ader pidi võimalikult paremale poole jääma. Viimast reguleerimist saab teha parempoolsest püsttõmmitsast keerates kas pikemaks või lühemaks. Seda juba künni käigus.

@hrz4x4

5 жыл бұрын

Ma oletan, et see mõõt vastab siis, kui russiga künda. Aga kõik muu tundub loogiline ja teised kommenteerijad on ka seda öelnud, et võimalikult paremal jne.

@jurih5622

4 жыл бұрын

@@hrz4x4 Tere! Väga ilus töö, arvestades et maa paistab savine ja raske olema. Püsattõmmitsa pikkus pole oluline, tähtis on et adra raam oleks maaga paraleelne, see tähendab et esimene ja viimane hõlm künnaksid ühe sügavusega. Kurekaelad peavad olema maaga risti. Lõpmatult paremale sahka ajada ei ei saa, sest esimene korpus peab kündma sama laia maa kui teine korpus. Kangist saad muuta adra töölaiust, kui on kerge liivane maa, lased saha karemaa poole, kui savine raske siis künnimaa poole viilu kitsamaks kõikidel korpustel, sellega tagad et künniviilud ei lükka sahka liialt vasakule. Muidugi vanematel korpustel on vastusurve plaat väga lühike, uuematel poole pikem. Veovõllil selleks vänt sees. Kui traktoril liiga laiad rehvid, mis ei mahu künnivao sisse, trambitakse viimane künniviil kokku ja siis ei saagi esimene korpus seda täis künda. Kverleland adrad on parimad. Muidugi ideaalis kui kõik on õieti timmitud, peaks traktor jooksma otse, esirattaid pole vaja keerata vastu vagu ja tagumised külgtõmmitsad on vabad ehk ilma pingeta künni ajal. Jõudu!

@hrz4x4

4 жыл бұрын

​@@jurih5622 Tänan abiks info eest! Mul on kogemused väga väikesed kündmisega ja selle konkreetse künnitöö suurimaks miinuseks oli adra halb seis. Peale kündmist sai päris palju juppe ära vahetada, mis olid juba ammu liiga kulunud. Parandamise video on siin: kzread.info/dash/bejne/faGD0Keed5a0p6Q.html

Świetny filmik leci Sub i łapka up wpadnij na kanał pozdrawiam Podlaski Farmer TV :):):)

@danielwawrzynowicz9073

5 жыл бұрын

Podlaski Farmer TV

Как называется ваш плуг

@hrz4x4

5 жыл бұрын

Kverneland Hydrein MI

@user-bq3ch8bs5t

5 жыл бұрын

@@hrz4x4 у вас угол атаки как у плн3-35 или долоты по другому стоят?

@hrz4x4

5 жыл бұрын

@@user-bq3ch8bs5t Я не знаю.

При с Пашки надо Кун убрать знаешь какая нагрузки на передок

@user-ow7oe7to3f

5 жыл бұрын

Бред)))) люди доп грузы вешают.

@DEN4IK556-b4k

5 жыл бұрын

@@user-ow7oe7to3f откуда ты знаешь а? знаешь какая нагрузка на передок?

@user-ow7oe7to3f

5 жыл бұрын

Денис Комаров я тебе ещё раз говорю что до 500 кг вперёд груз устанавливают при пахоте дабы разгрузить задний мост.

@DEN4IK556-b4k

5 жыл бұрын

@@user-ow7oe7to3f я хз первый раз слышу такое

@DEN4IK556-b4k

5 жыл бұрын

@@user-ow7oe7to3f но если у тебя много бабок то до тонны можешь загружать

Small rocks - wtf .. make a video o removing it - this will be great.

@hrz4x4

5 жыл бұрын

:-) spring time job. I could not get the 'small stone' with this front loader - better do it in the spring.

Мтз 82 иак

elmamı soyuyon dayı batırsana pulluğu

Ох ц роль