My Favorite Gemini Junior Die Cutting Sandwich To Prevent Warped Cutting Plates
Тәжірибелік нұсқаулар және стиль
For more still shots, information, and a complete list of supplies, please visit my blog at
Follow me on Instagram @carissawiley bit.ly/2iTkD1T
Featured Supplies List
• Cutting Plates for Double-Sided Dies, Crafter's Companion Gemini Junior
--- ldli.co/e/xlm5lp4
--- ldli.co/e/1p45p91
--- ldli.co/e/d79o7nm
• Clear Cutting Plate, Crafter's Companion Gemini Junior
--- ldli.co/e/lm3kmn0
--- ldli.co/e/xlm5ldl
--- ldli.co/e/1p45pl4
• Crafter's Companion Gemini Junior
--- ldli.co/e/d79o7le
--- ldli.co/e/zr4lr9d
--- ldli.co/e/9dl9dnm
Product list made with LinkDeli - linkdeli.com/e/m9ey7d
*Affiliate links may be used at no additional cost to you. For full disclosure information, please visit bit.ly/2JZFfVt *
Пікірлер: 36
Those Double-sided die cutting plates are a gamechanger to my die cutting! I saw Jennifer's vid too and I've been using these plates for several months now and LOVE IT! SO glad to no longer need the magnetic or plastic shims anymore!
So I was just about to throw away my machine. I was in love with it at first. The size, the color (I got the pink one) it was so nice to have on my desk. BUT those plates were driving me crazy. I was on my third set and done. The cost of the plates were almost as much as the machine. I put it away and put out my Spellbinders Mermaid one. Then I saw your video and I think its it worth one more chance...thank you!!!!
Awesome tip. Thinking I will buy a second set of regular plates to use for embossing so I can keep these taped together for cutting only.
Thanks for providing a visual how to. You da best! 💖
I'm excited to try this. Thank you. 😊
Life changing! Thank you for this video!
I am going to try with my regular Gemini. Thanks!
Thank you so much! I have had so much warping of the Gemini Jr. Cutting Plates that I decided to switch back to Platinum 6 and I ordered the Glimmer Hot Foil machine from them too. However... I have HUGE issues with lower neck and back and have found the same repetitive motion (the crank handle) using the Platinum 6 is really aggravating my symptoms. After viewing your video I'm willing to try the Gemini Jr again (thankfully I didn't donate it). This may be the answer to the warping plates (I completely agree with Dina Carrol's remark below). If so, I'd "consider" the Gemini Foil Press as well. Thank you again Carissa, I think this information will be well received by many crafters.
Thank you for the great tip.
Thank you so much!
Awesome ideas
I use the base plate of a Grand Calibur with a normal Gemini top plate, used it for YEARS,top plate never warps. Of course not recommended. Just putting it out there . C
Someone on KZread suggested using dollar tree plastic cutting board and cutting down to size and using two each on each side plate.
@carissawiley
2 жыл бұрын
I definitely would not recommend that.
This is so awsome. Thank you. Is there a sandwich for 3D folders?
I wish Crafters Companion would listen and watch their crafters. Their machines are great but the plates are confusing, expensive and hard to find. They need to simplify them to keep their customers using this machine. I don’t use mine for all the reasons mentioned.
Link on where to buy the double sided plates?
I have spare gemini foil press top plate (the green one ) but I don't have a junior I have the larger machine was wondering if anyone has tried using these plates to cut regularly in the gemini ???
Will this cut fabric?
Hey there Carissa Wiley. Lol. I’ve been using a die cutter for years. I don’t use it that often so I have to look up how to make a sandwich. I’m serious. Lol
They no longer make the 6 x 9 clear Gemini Plates. I have a Gemini Jr. What do I buy instead of the clear plates?
Are you able to dry emboss with this sandwich or use embossing folders?
@carissawiley
2 жыл бұрын
This is for die cutting only.
it appears the cutting plates recommended are no longer available. Do you know of another vendor perhaps?
What about the regular (don’t have that special plate) plate set up
@carissawiley
2 жыл бұрын
I have shared the standard cutting sandwich in a previous video…it’s linked at the end of this video.
What sandwich would you use for embossing?
@carissawiley
Жыл бұрын
I would follow the instructions included with the machine. This sandwich is for die cutting only which is what I do most of the time. 🤗
I just bought my second set of double-sided cutting plates and they are separating when I cut small objects. Have you ever experienced that? I didn't have any problems with the first set.
@carissawiley
2 жыл бұрын
I’ve never had an issue with that. So weird. I would contact Crafters Companion.
@deneilrenfrow9018
Жыл бұрын
Mine are breaking into small pieces also
Do you not use the magnetic plate I thought you had to
@carissawiley
2 жыл бұрын
You don’t need the magnetic shim with this particular sandwich. It is different from the factory recommendations.
@wendydellow1103
Жыл бұрын
@@carissawiley where do you purchase please
Hello
Son unos QQGIRLS.Uno de los mejorest conciertos Mañas no 5 se l 💯💞😍