The ECM Synchronika is a gem. Just looks like a beauty! Also, the information is pretty spot on and water is extremely important. Great job on this video!

When I saw You shave your beard with a shirt and tie on... I said to myself, “ damn... this is the channel for me”

Congratulations Kirby on the new "toy". That is a masterpiece. I hope you get many years of enjoyment from that machine. Kirby, have you ever considered a home tour? That would be a great lifestyle piece we would all enjoy. Mike

One word of advice, get BWT water. If you have a water filtration system in the house, usually it is a water softener that uses salt. The systems use sodium to displace calcium to soften the water. An ideal level of softness is in between 100 and 150ppm. A BWT system uses magnesium to displace calcium. This produces better tasting hot drinks. You need to get a water test kit to see where you stand as a starting point. If your whole house is filtered and you are not going to plumb in the machine, then get a BWT penguin pitcher. I plumbed in my machine, but the cost was about $600 and I did the labor myself. Since I had measured the water, I knew that my region averaged about 125ppm. On the city websitem they stated the water was at 125ppm. I bought a meter from Amazon that measured my water at125ppm. A BWT penguin reduced that to 100ppm. As a side note the hot water from my water tank was 400ppm. Full of impurities in comparison to the cold water. The tank was 1 month old at the time. If you use BWT water, you will never have to descale the machine. Only backflush it. Taste wise it walks all over a Brita because it is actually changing something. DO NOT use reverse osmosis water or zero water. Water when beneath 100ppm begins to become corrosive. If you put pure water into a boiler and heat it up, it will leach minerals from the boiler itself trying to reach an equilibrium. This will pit the boilers and cause leaking. I'm 11 years in on my journey. My original machine and grinder are still alive. This January, I bought a Rocket Giotto Evoluzione Cronometro R with a rotary pump. The ECM doesn't fit under my cabinets. The ECM flow control valve pretty much fits any E-61 machine, so I will install one on my machine.

Just bought mine and now I'm watching every video I can find. Thank you for sharing.

Kirby I am surprised to see you doing a Espresso Machine so Happy for you. I am used to seeing you with the Cigar recommendations.

Great choice, it’s a lovely machine!

That looks like an amazing machine. Once you get to play with he machine and find your right beans, you'll be set. For my suggestion: you will also need access to some ice and an aerator for cold milk. From my understanding Texas has a similar weather pattern to my home town and we love our Iced Coffees - so much so that they are our go-to as the drink of choice during the warmer months (all 10 of them). Simple recipe: Crush the ice, place it in a tall (high ball is good) glass, add the coffee shot, then the frothed chilled milk - use a knife to pour the milk in, then add a serve of froth to the top. IF you're a sugar type guy, add the sugar to the glass after the ice. Trust me, we love our coffee so much here, we kicked out that US Coffee chain. Have fun. I hope you and your family are safe.

very nice and beautiful high-quality espresso machine , you really going to enjoy that machine . very nice suit and shoes 👌

I gasped when you mentioned reverse osmosis water and was relieved to see you re-mineralize your water! I've found James Hoffmann to be a great resource on coffee in this KZread community

@kirbyallison

4 жыл бұрын

Yes! I’ve watched a lot of James Hoffman’s videos! Still a large knowledge gap I’ve got to bridge between where he is and where I am! Espresso is intimidating as a beginner. But I’m looking forward to learning!

@socke2745

4 жыл бұрын

@@kirbyallison Tell me about it. I started my journey a few weeks ago with a la pavoni professional and an accompanying eureka mignon mci grinder. Since then I've grinded myself through at least 2 kg of coffee and went through all stages of grieve. But when you get it all right (or whatever you call right as a beginner), the result is so rewarding. Mastering a truly mechanical machine and figuring out its specific quirks is so much fun. Making good coffee really is a journey and worth every step. And James Hoffman definitely is one of the best tour guides you can get. Enjoy your ECM, you've got yourself a well built, handcrafted machine and a sweet E61 brewing group.

Next: See Kirby drop 500k on a new microbrewery, for his cheeky Friday afternoon ale, then follow Kirby as he employs the village in Punsari, India to manufacture his authentic looking tweed jackets, that he wears every second Tuesday.

Ugh, I was saving up for a new watch but after seeing your espresso machine I'm confused! Also love how you tie your neck wear, very Agnelli.

I love espresso! I enjoy espresso at the magnifica S in Delonghi. Thank you for the very interesting video! With love from Japan :) I will come back again.

If you found a single boiler machine with a heat exchanger, you can steam and pull the shot at the same time with no problems. My wife and I have a Lelit Mara which has an amazing E-61 group and a heat exchanger and it’s wonderful.

@kevinb2014

2 жыл бұрын

Agree. He clearly doesn't know much about espresso machines based on that comment.

@Koofteh

2 жыл бұрын

The problem with HX is temperature consistency. Having one with PID helps but dual boiler is still ideal, if you have the money and space there's no reason to get HX over DB.

A gentleman should always have a pocket knife for such occasions ;)

@Clickerbarmicker

4 жыл бұрын

Most important

@matthewrichardson2077

4 жыл бұрын

@@Clickerbarmicker not a horror movie knife...

@ehs-elitehomeservicesbga2954

4 жыл бұрын

Benchmade gold class with a damascus blade. Perfect balance between elegance, usefulness, and cost.

@leeduhart105

4 жыл бұрын

In addition to pocket knife, how about some artwork on the wall.

@HarryFlashman.

4 жыл бұрын

Agree entirely. I always carry a Victorinox Escort swiss army knife. The smallest they make with one sharp blade, nail file with screw driver tip and tweezers. It's small enough not to show through the lining.

Brilliant video kirby

Nicely done Kirby. Agree with the upgrades. Reminds me of a saying I heard "buy once cry once". Sharp tie, will have to check website. Now you can branch into the Kirby Home Collection with bone China espresso cups. Then high thread count sheets. How was barrista school as it sounds fun?

Amazing!!

Thanks for posting this. I'm also considering this one. One think - it's kinda weird that the ECM machine still has some Profitec labeling... I know they are sister companies, but you'd think the ECM badging would be consistent...

I accidentally landed on your channel and I'm so glad I did. Thank you. As far as the ECM Synchronika machine, do you mind giving me the dimensions of the machine please? I'm trying to make sure I have enough clearance for refilling the water reservoir. Thanks again for the wonderful videos you make

I can see that you would get on great with the report of the week guy. Reviewbrah 😎

I’m going to the coffee shop for freshly ground coffee. But you have a pretty good grinding already that possible cost a few hundred dollars.

We both love coffee, i have one also Nuova Simonelli musica lux. I love it☺️

Terrific machine for typical daily use. I had one for a few months, and it worked great until I used it for parties and brewed back to back shots and steamed milk. I ended up getting a 220V Dalla Corte Mina and it’s beyond amazing. I was always a huge La Cimbali fan and they make a classic style machine of similar size, but it’s not as adjustable as we like. What’s nice about mine also is being able to use the app to profile and automatically adjust flow to match shots I enjoyed that I pulled manually previously. I know it’s a whole different league machine, but it’s always nice to have a “dream machine” to look forward to. For me, it’s a Victoria Arduino, the brand used in the World Barista Championships, just a version wIth less group heads. Anyway, haven’t had a chance to watch your other videos yet, but looks like a great channel. I always enjoy a fellow gentleman who appreciates the quality and art found in quality items. You should consider a video on Bertazzoni suits/shirts and Barbour jackets, both iconic menswear brands. AND last but certainly shouldn’t be least is Miele washing machines. I have a 25 year old Novotronic that has never had a single issue and can boil/wash if needed. I just got their new W1 washer and T1 internal heat pump dryer. The washer is their top tier W1 with automatic detergent dosing and a proprietary pod system for specific fabric tasks, my favorite being the proofing pod and specific cycle designed to keep skiwear waterproof, but I use it for things like tablecloths and things like red wine just bead right off. You can adjust every aspect of the machine via an app. They have a patented honecomb drum so clothing never actually touches the metal drum, just floats on a thin layer of water. The washer and dryer communicate and for ideal finish. The T1 is a new concept. It’s not like the old condenser internally venting dryers often in european apartments. It uses a heat pump style system to recirculate the internal air. It uses 50% less energy as well compared to a traditional dryer. I have measured the energy draw between my 2 dryers and it’s even leas than half.

@ehs-elitehomeservicesbga2954

4 жыл бұрын

Meant to say Battiston lol. Bertazzoni is my range, which is also amazing and deserves a review.

@ehs-elitehomeservicesbga2954

4 жыл бұрын

Battistoni. Long night smh

@ehs-elitehomeservicesbga2954

4 жыл бұрын

Oh, forgot to mention, I just had a triple filter RO system installed. The last filter has around 10 options and one is commonly used by high-end coffee shops for remineralization, to prevent machine damage from RO water, and provides enough electrolytes so that the water level indicator in higher end machines will be able to read level.

@ehs-elitehomeservicesbga2954

4 жыл бұрын

Oh, and a gentleman must always own a Leica M Series camera. I prefer the M6, their second to last film camera. The class of owning/using a Leica is using it for so long your fingers automatically make adjustments without your attention and it never goes out of style, crashes, hardly ever needs a battery change, ages with time, and while I am partial to my own leathergoods (Hunt Valley Leatherworks), their higher-end leather straps are gorgeous, yet simple.

@kirbyallison

4 жыл бұрын

Which system did you use for your RO? I haven’t found anything that provides any detail on the remineralization.

How is your wooden tabletop holding up with the moisture? I’m choosing a table and I’m debating stainless top vs wooden.

So luxurious

Wait. You're doing coffee as well now? This Channel only gets better and better!

I like your tamper mat and I would to ask you from where I can get it. Thanks

Hi Kirby, congrats on the new profound adventure. I'm not a coffee drinker but it just would look great as a piece of kitchen furniture! I notice a stain on your shoes? What happened? Im curious what it is and how you'll remove it. Cheers.

Yes but unfortunately you missed the Synchonika anniversary edition it will look great with your style specially the boiler cap & the steam cap withe the portofilter handle Olive wood finishing ;)

Very nice video, but I don’t understand why you left the smaller end of the tie longer than the wider, isn’t it better when the smaller end is covered so no one can see it?

@lullemans72

4 жыл бұрын

this is really more of a stylistic choice. it adds a bit of flair to the look as opposed to being completely according to the rule book. i encourage you to look up the term sprezzatura to find out more about this concept of breaking the rules.

@pacoceron8378

4 жыл бұрын

@@lullemans72 sprezzatura is more about doing, or at least make it appear as if you do, no effort to put your look together, it could involve breaking some rules but that is not the main idea behind the concept. In other words it is more about I don't care if the thin end is longer rather than I'm going to break the rule on purpose

This machine is of the highest quality and is beautiful. I could not pull the trigger since it is not Italian designed but is manufactured in Italy. Mine has to be Italian or I just could not buy it. I know that is petty, idiotic and senseless, but mine had to be Italian designed and manufactured with a direct history to the production of espresso in Italy. That's just the way I roll. Do the research on Vibiemme (VBM) and you will see why I bought a double boiler, PID, rotary pump VBM machine which has a direct history to the invention of the original E61 group-head and is built like a tank; industrial quality. Now when I sip my , I believe very delicious espresso (who knows it's so subjective) it actually tastes like heaven to me since the lineage of making espresso is directly linked to the design of my machine. To each his own and that's my story of how I have always approached buying quality items in my life. Enjoy it, it's sublime and most of all have fun!!

It's very nice. By the way is that a pantry or the catering kitchen?

Seems like, in anticipation you might have purchased a professional grade box cutter. I might recommend the ABC box gutter 9000.

hah, funny! I've been following your channel but didn't know you were into espresso as well. Just 6 months ago I invested in a nice Eureka grinder and a well built portafilter machine myself. It is such a relaxing habit to grind and brew an espresso and enjoy it.

@mohsinali3342

4 жыл бұрын

How much Eureka grinder cost to you?

@ehs-elitehomeservicesbga2954

4 жыл бұрын

Have you played around with mixing various bean combos? Any good recipes?

Hello Kirby. I'd love to see a collaboration between you and James Hoffmann on the topic of coffee.

That’s what she said 0:42

@FilmCars

4 жыл бұрын

:-p LOL ...and needs Oscar setting it up for the The Finer Things Club

@veetour

3 жыл бұрын

Also at 1:14

Good to see that the Yankees are finally getting a sense for coffee, it was about time ;)

@kirbyallison

4 жыл бұрын

😂🙏👌👍

What is that car you are driving? It is kind of blury so I can't see.

You should do a one year ownership update on the ECM Synchronika, thx

Someone please pair this guy with James Hoffmann, oh the espresso possibilities!

The ECM is nice, but your shoes are the star of the show.

11:09 i noticed a little dark spot on your left shoe. ouch.

Just continuing to bring it, Kirby! "IM KIRBY ALLISON, The most INTERESTING man in the world!" =) Great job, brother BUT WAIT - he's wearing RUSSIAN Reindeer shoes! WOW! FULL ON! Noooooiiiiiiicccce!

@ehs-elitehomeservicesbga2954

4 жыл бұрын

Russian reindeer is great, and molds extremely well, however breaks down easily, so I would only recommend them if you have a large shoe collection and wear them only occasionally and carefully. Genuine Shell Cordovan, most commonly produced by Horween Tannery here in the US, is not only the epitome of dress shoe materials, but also extremely well wearing and develops a patina rather than breaking down with minimal care. I own a leather products company and use it for many items including custom belts, watch straps, and strops for straight razors. For daily use, we make wallets, passport cases, attaches out of their Chromexcel, which is tanned with so much fat and oils, most scuffs from normal use buff out with your finger or soft cloth. It is also terrific for our custom fly fishing, hunting, travel, bags and gear prone to heavy use and water exposure.

Back plate of tie is longer than the front plate? Is that a thing now? What is the current style of tie length?

I live the music. Very nice! Don't you think a Gentleman would have someone polish his chrome for him? (Hai davvero bisogno di una bella foto del Lago Maggiore per oltre quella macchina.)

That is quite a machine, enjoy! Also, dig your Model 3. I’ve got the same car but with white interior. Another good choice! 👍

@kirbyallison

4 жыл бұрын

I love the Model 3... especially waking up to a full tank of gas every morning...

i want to upgrade my coffee here also.

Do more coffee , cappuccino videos… please!! Nice machine, I would’ve got a Rocket myself.

This guys videos always make me think why didn't I do a group buy of hangers on AAAC, then I could be the multi-millionaire somehow. Though, I am a bit confused by the entryways with no molding.

@kirbyallison

4 жыл бұрын

Haha. Don’t believe everything you see on the Internet...

@TheRacerRich

4 жыл бұрын

@@kirbyallison I don't know, we were in college at the same time (I remember the very beginning of The Hanger Project) and when you went down this path I went to law school. You're driving a Tesla to your turnkey home and wearing G&G, and I'm driving a 13 year old car I do my own repairs on to my fixer upper and wearing Alexandru Maftei (which I can only justify because they are saving me from a foot surgery). Not hating, just respect. I'll go console myself with a shot from my Gaggia Classic. I just realized I'm budget Kirby lol.

I have a Niche 0 Grinder. After going through my fair share from Rocket Faustinos, etc. Niche 0 is so far the best. Low temperature interruption to the final grind and virtually 0 retention in the burrs.

@eviesyd

4 жыл бұрын

Justin Bernardino I agree. I have tried Niche for 2 weeks and it is by far the best I have used. But not as quite as I would expected. I am still using eureka just because the square shape fits the rest of my kitchen style better. What machine are you using ?

@KTOWNK1D

4 жыл бұрын

@@eviesyd: At the moment, I only use the Niche for Espresso, on a Rocket Appartamento Nera. I've used the Niche on a friend's Carmina Olympia and it does very well. Are you looking forward to the new Eureka Helios?

@eviesyd

4 жыл бұрын

Justin Bernardino my current eureka allows me to dial in and play around with most of the recipe, so I am happy with it.if I would change then I might go niche. I am going to give my current expobar minore to my friend. So I am thinking about get a R58, as linea mini is too big for my counter.

@KTOWNK1D

4 жыл бұрын

@@eviesyd: It's a good investment. The only issue with Niche, really, is the clean up. I'm used to handling mechanical units (disassembling and reassembling), but to most, it's a nightmare. But for me, I'm happy. The Rocket in general makes excellent machines. The R58 is beautiful though, probably one of their best yet. I like how they've decided to try and compete with decent by adding on an additional shot timer and a digital control. For my next machine though, I may go old school, like my buddy, and get a Olympia. Something about pushing a shot yourself feels appealing. I say that now, haha.

“ ...excellent - I enjoy a fresh 100% Arabica espresso too!” ☕️👍🏻 - Anthony Aaron

Why did you have to wait for it to be built? They are stocked in lots of places. Get rid of that grinder and get something designed for single dosing. On the higher end look at Ceado E5SD or E37SD. I made the same mistake but single dosing with a hopper grinder is a disaster.

Dang it! I thought I had moved on from Kirby to James Hoffmann months ago!

can you tell me the dimensions of the ECM Synchronika box ??

I think your next video should probably be about acquiring a more stylish knife for future unboxing videos.

@kleinebre

4 жыл бұрын

kzread.info/dash/bejne/i2Sc3JOmm8fHe8Y.html What's wrong with a psycho style kitchen knife? Just stay out of the shower and you'll be fine.

my grlfriend bought several expensive espresso machines for the office and none of them lasted or made good espresso.. I've been sticking to Mr Coffee's $100 dollar machine ever since.

Che bello! Lui ha il migliore! Amazing machine. Enjoy.

Dear Kirby, i would like to clarify the following topic. Indeed i'm writing from France and in my project it was planned to buy high quality hangers to take care of my new bespoke suit. My idea was to buy hanger project hangers, and i can buy it at Valmour in France but they wrote on their site, the quality is decreasing due to chinese production, too long delivery time...and it looks like their want to move to another brand ? Could you describe your hangers as you appreciate quality and hopefully kill this bad picture... Many thanks in advance, it's always a pleasure to follow you Mr Allisson.

@kirbyallison

3 жыл бұрын

HI Olivier, apologies for the slow response. I have only just seen this comment! Not sure how it slipped past me. Firstly, thank you for bringing this to my attention. It is very sad to see this being written on Valmour's website, and is something I intend to take up with them urgently. I would also add that it s categorically untrue that the products are lower in standard. Any damage that Valmour has experienced has been solely function of damage in transit. We obviously have quality control measures in place here in Texas, so when we receive hangers from the factory, they are all checked. The hangers themselves continue to be the best standard for protecting people's garments, and I would encourage you to try them and see the benefits for yourself. If you do have to order through Valmour, please let me know directly if you have any issues.

What happen with the tie?

Glad your seeing the upside to grinders bro mines abit more hand held though hehe

Very nice! I must admit I smiled when I recognized the neighborhood :)

@tt55k

4 жыл бұрын

Yes I know where he is too , the neighborhood anyways.

Who cut the trousers?

You shouldn't push the cardboard box directly touching the nice wood floor, lift one end of it and stuff a blanket or some other soft material under it, then go to the other end and lift it a little bit so you can pull out the blanket on that side and when cardboard box is standing on only the blanket you can push it without risking to scratch the floor. And yes I am pedantic or as I prefer to call it I'm thoughtful before acting. Do the same repositioning furniture, a blanket under the feets of whatever you repositioning and you never leave bad scratches on the surface.

@kirbyallison

4 жыл бұрын

Great point!

❤️

Dear Kirby, what a interesting video. Although I don’t drink coffee, I find the art behind it quite fascinating. Personally I would have chosen the Speedster designed by Kees van der Westen. It is a Dutch design. Can’t wait for the video of you actually making a cup of coffee. Greetings from the Netherlands.

@michael_smith

4 жыл бұрын

This machine is a complete different price point, it’s over double nearly triple the cost of the ECM.

Came here for the Synchronika, but was struck by the sparse interior furnishings. What items do exist, appear to be well-made items. Not of the typical Ikea ilk. This here ladies and gents, is a smart man. Not practical to a sterile fault, however. Just wise beyond his years in understanding the importance of purchasing quality items. They are, in fact, less expensive in the long run and a pleasure to experience. Much like a good woman.

"Water is exceptionally important in an espresso" -Kirby Allison, 2020

@maxvanbeers4548

4 жыл бұрын

Once you dive in the world of water, you can never go back to just tap. (no pun intended)

@ehs-elitehomeservicesbga2954

4 жыл бұрын

Fiji bottled makes the best espresso until you install a filtration system with a remineralization/electrolyte cartridge in the last stage. Pure RO water will damage the machine, lose flavor in the espresso, and even cause problems with water level sensors not reading level.

It's a good machine.

I'm moving to america in two years time and I hope to go or a drink with kirby 🤞

This guys fucking lives my dream... =@

I expected you to roll up in a 2000 XJ8 for some reason

@kirbyallison

4 жыл бұрын

That would have been nice... but don’t have the stomach for constant mechanic bills... I would love a 2008 Bentley Arnage! One day!

That is quite the espresso machine. But for a double boiler with more ease of access, I'd much prefer the Breville Oracle Touch

I run a commercial nuclear reactor for a living. This machine terrifies me LoL

@kirbyallison

4 жыл бұрын

😂

Great looking Machine,for that price I would want a Hardened Glass water tank instead of plastic.Shoes are Great also.

Did anyone count the "babies"?

I thought he was Mr. Rogers...only with a little more sugar in his shoes.

I am from Heidelberg

Legend has it kirby is a tax evader

@ukboarderforce3917

4 жыл бұрын

@Opi-Rage he is a tax evader I have proof

You play the piano Kirby?

@kirbyallison

4 жыл бұрын

Unfortunately, not. But my children do!

@raphthecollector3824

4 жыл бұрын

@@kirbyallison Lovely! Keeping them classy.

0:49 "layer"... whoops.

Good video and I learnt a lot but it was not really an unboxing

I'm drinking instant coffee at home and invested the money i saved on an expensive espresso machine.

@kirbyallison

4 жыл бұрын

We should have all just invested in Tesla...

I have destroyed numerous espresso machines over the decades of thinking oh just use filtered water. I would never treat it. Just buy distilled cleaner cup and never any sort of scaling or eating your boiler, portafilter, hardware.

@BensCoffeeRants

2 жыл бұрын

Distilled water has no minerals and is slightly acidic, when boiled it's going to leach some metals out of the boiler and cause the opposite problem of scaling, it's going to cause corrosion over time. Also coffee and tea usually turns out gross and flat / acidic tasting as a result. He mentioned that in the video, looks like dude's done his research. Reverse osmosis is similar, if it's working right it should have almost no minerals, some systems have a alkalizing or reminerlizing filter media to add some minerals back which could work. There's coffee / espresso oriented filters like BWT ones that take out calcium and replace it with magnesium.

Try to do something with James Hoffman! He is a hit man when it comes to coffee related ANYTHING.

@MirrorCoffeeRoasters

4 жыл бұрын

You speak the truth!

It's kind of funny when you talk about how you "need" a double boiler. I think machines with boilers are going to become a distant memory in a few more years. Have you heard of the decent?

future proof... Wait, I can't stop laughing... :D :D :D

@kirbyallison

4 жыл бұрын

Why’s that?

@cdvax11

4 жыл бұрын

@@kirbyallison I perceive you as a connoisseur who is never going to be satisfied with less than perfection. Gear Acquisition Syndrome is real... Upgraditis is real... Enjoy the journey!

@stinkdyr301

3 жыл бұрын

@@cdvax11 Upgraditis! I love it. :-)

You count in gallons^^ #wearetheonlyswhodontneedmetric

My wife did better , she picked up a month ago an almost new $1,400. commercial office Lavazzia machine at a thrift store in Florida for $15. ,yes it was $20. and she got a discount of25%.

You are passionate about dressing yourself; how about dressing your house? Get some art on those walls and your house will have a soul.

why would you leak your actual address? yikes

9:42 ..."and get some freshly ground beans" ... whoops.

Why do you need a dual boiler...are you starting a cafe...pfff...

Heey man, I'm a professional Barista trainer, if you ever have some questions just hit me up 😊

Dude - Great espresso machine. But, fix the tie - tail can't be longer than the front!!

Sooo... you bought a 3k coffee machine for personal use? Yikes.. ok I guess there wasnt a factor in the law of diminishing returns...

@GreedyLittleFokker

4 жыл бұрын

A 3K machine AND a $1300 grinder.

@stopthecap2644

4 жыл бұрын

@@GreedyLittleFokker lol wtf? a 1300 grinder???? how's that even possible? is it platinum or something

Of course Kirby drives a Tesla.

6:55, very pedantic point, but then your espresso is unfortunately very

@kirbyallison

4 жыл бұрын

Espresso is crazy.

You walk in your house with shoes on? WTF is wrong with you. Take them off. OUTSIDE=dirty, INSIDE=clean.

of course he is a tesla driver lmao

@kirbyallison

4 жыл бұрын

Why do you think so? Great vehicle...