The song is what does it for me 😂

@hellomundo4647

2 ай бұрын

😂😂😂

@tysoncooper1887

2 ай бұрын

Boats and hows

I added a floor on my intex inflatable (forgot the model) but if you add a few pool noodles that you cut length wise, they can be used around the edge of the wood and then wrap in carpet. It helps fill the void between the chambers and provides a little more stability.

@TheYendorian

3 ай бұрын

I put a strip of carpet around the edge then wrapped it. I thought the noodles would rip and deform over time

The songs mint 😂

The song is comedy! The small boat is dope too.

New meaning to get it poppin 😂

I bought this boat after I watchin this!

@TheYendorian

3 ай бұрын

That's awesome!!!

Great lil setup. 🎣

به به اکسکروشن ❤

I’m doing the same to my seahawk 4. Got a 46lb trust motor for it

That’s dope man, I’ve been planning on building one of these for the summer.

@TheYendorian

2 жыл бұрын

The floor make such a difference. More stable for sure

@Imnotmisty

2 жыл бұрын

Same

@ProducedbySRT

7 ай бұрын

What was the process of making this and how much did it cost​@@TheYendorian

@xavierstilwell8815

5 ай бұрын

@@TheYendorianis there anyway you remember the dimensions

@TheYendorian

5 ай бұрын

@xavierstilwell8815 unfortunately not

Nachos and Lemonheads in my dad's boats I need this full song please it's golden 😂

@joshhickson7551

Ай бұрын

Boats and hoes from "Stepbrothers" (movie)

Awesome brother.

Nice, how wide is your floor board near the center (40”-42”)?

Hella late but let's go!!

Just bought a 25 lb thrust trolling motor for my excursion 5. What did you use to extend the motor mount arms?

Great

La niña la pinta y la santa maria 🤣

Haha stepbrothers

Nice for sure. I’ve been eyeing this same boat and watching vids on how to make the floor. I just don’t know about an inflatable boat. It’s save me money for sure but I’m kind of leery. Let me ask, do you leave it inflated and if not do you inflate once you get to the water and if so how long does it take you to inflate and get the trolling motor attached? Also, what battery do you use?

@TheYendorian

Жыл бұрын

I inflate it at the water I usually lay a tarp out and do it on top. From start to in the water and ready I'd say 30 to 40 min depending on how slow and sidetracked I get hahaha I have a 12v 45lb thrust motor and a big deep cycle battery. The battery is probably the heaviest thing on the raft besides me haha

@joshhickson7551

Ай бұрын

It's worth the 30 min of setup, I got mine for free and just discovered all the mods. It seats 4 comfortably and you can get legal tags from Intex if you want to register it. I live in a state that requires a license for using outboard/trolling motors and I'm working on getting it. But yeah it's really easy to build them out with simple materials. I don't have enough space or money for a boat on a trailer so this is perfect for me. Even got a 50cc outboard motor for $100 to go with mine. Trolling motors are way quieter though. Buy the motors used. If you're gonna buy the boat used, read the owners manual. It has tips to avoid punctures by avoiding overinflation measuring points on the boat. Provided you store and use it right it should last decades. My mom had an inflatable boat that lasted for 20 years!

Just got this today. Is it good?

@TheYendorian

3 ай бұрын

Love it I have 2 haha

@NoahRankin-mk8kt

3 ай бұрын

@@TheYendorian sweet🤣

how and where

Does it help to extend the bracket like in the video even if the engine has too much thrust?

@TheYendorian

3 ай бұрын

Yes otherwise it will sag when not in use

Is this the 4 man version? Does a 12v car battery work? And how is it attached? Do you have links to the products used? As I would like to make one myself

@TheYendorian

3 ай бұрын

It's the 5 so the bigger one and any intex motor mount should work

Did you do anything to hold down the chair to the floor so it doesn't move around?

@TheYendorian

Ай бұрын

It's just on their I put the battery under it and that keeps it from moving to much

@samwell7640

Ай бұрын

@@TheYendorian gotcha, appreciate the reply!

Just noticed the length of your oars/paddles. How long are they please?

@TheYendorian

Жыл бұрын

It's a kayak oar double sided I believe it's 7 ft to 8 or 9 it extends a bit

@markweatherall7437

Жыл бұрын

@@TheYendorian Ok thanks thats great 👍

How do put on the rod holders?

@TheYendorian

Жыл бұрын

They are built in

What size plywood did you use 3/4 ?

@TheYendorian

11 ай бұрын

Yup

what did you use for the floor

@TheYendorian

11 ай бұрын

A sheet of plywood wrapped in outdoor carpet

I've used these boats before all it takes is 1 fish to toss the hook into the side of it and you'll rethink inflatable😂

@TheYendorian

Жыл бұрын

6 years and no holes yet... knock on wood

@guttagutta420

Жыл бұрын

Even if that happens you have 3 separate chambers so you won’t sink and it can be patched.

@TheYendorian

3 ай бұрын

Always carry flex seal tape haha

What trolling motor and top speed? I was thinking about buying this

@TheYendorian

Жыл бұрын

It's an old 45lb thrust if calm water It's about 5 to 6mph

@Fernando-ve8wq

15 күн бұрын

@@TheYendorianwhat battery are you using for your 45lb 12v 100ah? How long does it last you? 4h on high gear?

What do use to mount the motor

@TheYendorian

Жыл бұрын

A intex motor mount it made for the raft I just used longer poles on the top to make it more sturdy

@b20eg195

Жыл бұрын

I wonder if the rear end area if a board was made to also support flex would it help too with the weight of a 45 to 55lb thrust motor

What is the flooring you have there?

@TheYendorian

Жыл бұрын

Just a trated piece of plywood wrapped in carpet

Is one person alone capable of rowing this?

@TheYendorian

Жыл бұрын

Yes it's a lot easier with the hard floor thou

@Sssssssslf

Жыл бұрын

@@TheYendorian how did you do your hard floor? I've looked online for how to's and can't see any tutorials or hard floor 'conversion kits' or anything like that

@TheYendorian

Жыл бұрын

@ThreeOfAKindx3 I just blew it up in the yard and took some measurements I just used 1 piece of ply wood and tapered off the ends then wrapped in carpet

@Sssssssslf

Жыл бұрын

@@TheYendorian thanks. Is the carpet covering necessary or could you just paint the ply with waterproof varnish?

@TheYendorian

Жыл бұрын

@ThreeOfAKindx3 I did carpet so the wood wouldn't rub on the raft gives it a nice soft buffer