Appreciate you taking the time to show this. It helps when you’re a 62 year old rookie such as myself .

@branchandfoundry560

Жыл бұрын

I found this particularly informative because--although I make furniture--my work is a non-traditional style, so I've never used moldings like these. This video may be a catalyst to jump start my thinking toward different design styles.

@stevenclarke5606

Жыл бұрын

I’m 63 years old and haven’t done any woodworking since leaving school, but I’ve just done a couple of projects and I’ve made a few mistakes, but I’m really enjoying it and hopefully I’ll get better, thanks for your advice.

Custom moldings can really take your project to the next level!

Thanks for sharing this info Jon! Those are definitely great bits to have. Sometimes I forget what nice molding can be made from them so I'm glad you reminded me!

Watched a lot of your projects. You always made your own molding. I thought how come I don’t do that. Well I do now. Adds such a nice touch. Spot on match for the kinda of wood you are using. Good videos Jon. Thanks

The best tips on blades are in this video. Thanks for sharing your helpful experiences.

Enjoyed Your video on moulding ! And demonstrating the looks of the different bits.

Thank you for the great ideas in the video. When I see one of your videos show up in notifications, it is the first one I watch.

@JonPetersArtHome

2 жыл бұрын

Thanks Chuck!

I could watch this guy all day, and I might.

@JonPetersArtHome

3 ай бұрын

Thanks Russel! That’s really nice to hear!

I'll have to pick up one of those cove bits. I can see some cool moulding stackups being made with that one.

Simple work done creatively makes product very beautifully complex

Awesome video on Router bits. Thanks!

Brilliant tuition, thank you

As always John great stuff. I guess its your "artists eye" but your use of mouldings gives pieces a simple elegnce.

Great video as always Jon.

Wow very awesome just started doing little projects and you do such great tutorials

Great Video. Very informative!! 👍

Great video on useful bits John. My most used are similar, but I don't use a beading bit all the much. In its place would be basic straight bits; I use them a lot for template routing with guide bushings and for things like slots, rabbets and mortises. Straight bits are my most used, followed by flush trim/pattern, then round over, chamfer and cove.

@JonPetersArtHome

2 жыл бұрын

Definitely! The straight bit is must have

Great video Jon 👍

Really excellent tips, Jon! Thanks! 😃 You know, I used to paint... And lots of my paintings got a broken frame... So I'm going to use your tips to make some! Anyway, stay safe there with your family! 🖖😊

@JonPetersArtHome

2 жыл бұрын

Thanks!

nice summary! thanks

Thank you and have a great day.

@JonPetersArtHome

3 ай бұрын

Thanks! you too

I love CMT Orange bits

The idea of experimenting is crucial. It just takes a second to mill up some profiles from scrap wood; then you can sit at the bench and play. And meantime, you’ve honed your routing skills.

I could live with pretty much just them... I think, for me, the "bead" would not be critical... gotta try it sometime ! Nice video.

Thanks that was a great video My friend 👏

@JonPetersArtHome

9 ай бұрын

Thanks! I appreciate the comment

Now you can see just how great the Kapex is.

Great tips. Can you use a 1/4 round over bit to make 1/8 round over cuts (i.e. use 1/2 of the 1/4 bit)? I ask because I am new and plan to get the 1/4 bit and was wandering if I can get two cut options from the one bit. In other words, is it better to get a larger bit and also be able to make smaller size cuts? Also, when do you choose to use the smaller hand held router vs the larger router and 1/4 and 1/2 shank bits?

Great video! I'm not seeing the bead molding bit in the link you provided, am I missing it or perhaps do you have a model number? Thank you in advance!

9:53 This would make a very decorative backband as well, could be configured different ways.

Thanks for the great ideas! Did you manufacture the base cap molding for the blanket/toy chest this way?

@JonPetersArtHome

2 жыл бұрын

Thanks, no I bought that at the home store

Regarding the bead molding router bit...is the radius (of the cut on the bit) 1/4"? I picked one up and it looks a lot bigger than the one you use in the video. The shank is 1/4". Its the CMT 861.064.11 corner beading bit. Thanks for any help.

How would you make the bead mould on the top side of an arched trim?

If a chamfer bit states "1/2 inch cutting height" that would mean that is the maximum amount cut out/chamfer of the two corner edges, but you have to drop your router bit down far enough to get that amount from the bit?

What model router do you use for the mouldings?

Good idea I do that, I have 9 routers each with a different bit and tables

Question for the expert (you): Would I be able to se my 1/8" shank Dremel bits, with a 1/4-1/8" adapter, to use with my DeWalt DWP611 palm router? Please advise, thanks!j

Makers mob here I come

I have a router just needed to watch to learn a few tricks.

How are the circular CMT blades? I was gonna give them a try on the table and miter saws.... shockingly Menards has been carrying more and more of their products!

Very well

How can I trim sharp corners off my desk?

LIKE FROM BRAZIL

Great tips, thank you for the video. Is that a Milwaukee router? How did you like it?

@JonPetersArtHome

2 жыл бұрын

Thanks, yes I really like it 👍

Some may call me crazy for trying this. I use the Dewalt DCW600B trim router. Anyway, I needed a 45 degree chamfer bit at a client’s home. The Freud I bought has a 1-3/4 diameter which did not fit the base plate opening. I installed the bit & lowered the base plate with the bit spinning at full speed. 45 degree chamfer on 27 LF of hard maple later with my palm router, makes for a successful, less frustrating day. Yes, I have a spare base plate for smaller diameter bits 😊.

@branchandfoundry560

Жыл бұрын

Wow, Jim, that's a large bit for a palm router! My hat's off to you for having the cajones to try that gutsy maneuver.

@jimserhant7741

Жыл бұрын

@@branchandfoundry560 Thanks Branch & Foundry, I appreciate you and that.

What are the main differences/ advantages or disadvantages of 1/4” vs 1/2” router bits?

@branchandfoundry560

Жыл бұрын

Great question, Joey! Larger 1/2" shank diameter is exponentially stronger than 1/4", so it runs with less vibration and deflects less with the strain of larger profile bits--say anything over ~1" diameter. That said, less raw material costs less to produce, so 1/4" shank bits are less expensive (and perfectly adequate) for smaller profile bits.

@joeyjohnson9765

Жыл бұрын

@@branchandfoundry560 Thank you

Wow ...Getting router for each router bit can be quit expensive.

It scares me to see you routing without clamping down the work....i wouldn't do it..

Hi, this is Rock Rooster Footwear. We sent you a collaboration invitation email just now. Please check if it’s in the spam. Thanks!