he told toyota, "FINE, I'll build it myself". crazy build sir.

2JZ+Celica = dream

I’m sure a lot of us would love it if you could go more in depth with your front subframe and motor mount situation

This is one fo the most underapriciated cars

I'll be watching. Thumbs way up. Also, please show and talk about making the celica rear wheel drive.

The headlights are the best part about the front of these cars. I’m not into the custom ones BUT, if you like it then rock that shit! Other than that this is such a sick build. I’ve always wanted one of these with a B or K swap. The body style is just so good looking to me. They never got the recognition they deserved cause of the low hp engines I guess

youtube will work out bro... just keep pushing... been doing youtube for 3 years... the key is just dont stop... im a new sub

@Jager_M

2 ай бұрын

That’s what I’m trying to do, just keep making videos and atleast I’ll have something to look back on even if KZread doesn’t work out, honestly the editing has been kind of fun

@kzarnold3678

2 ай бұрын

Nicely done 👍 I found your channel today and subscribed as well sub:105

Underrated channel I can’t wait to see it drive

@Jager_M

2 ай бұрын

I started the channel last October so yeah it might be a bit before it takes off, until then things might be slow due to budget but I’m not giving up on the 2jz swap!

@lunar9763

2 ай бұрын

@@Jager_M its sick man please dont give up on it

how is this not blowing up (on KZread💀)

Man this is one of those builds that ever since i was a kid, would say something like "man it would be so crazy if...." Then just brush it off as a dream. It's like youre playing Forza in real life... Awesome build sir, looks beautiful and I cant wait to see where this goes. Is it RWD, or are you going full send AWD??? If you go AWD, you'll officially have the sickest Celica in the known universe. Subscribed

@Jager_M

2 ай бұрын

Sadly not awd but it will be rwd. I do want to later build my ideal celica that would be a turbo 6 speed awd but this is just a stepping stone to test my skills

In Germany nearly impossible. 😅👍 but yes Great dream! Thanks for duing this. And i Hope some Drive vids would follow 🖤🤗

Love what you did with the headlights

Crazy as much as the guy who swapped a jz into a civic. Keep on it.

What type of rear end did you put in it. I am doing the same thing but possibly with a sbc v8 and am trying to figure out what to do for the rear end. Please respond

@Jager_M

2 ай бұрын

I saw a guy on TikTok so something similar after I had already put the rear end in but it’s the rear subframe from a G35, 350z works too, you only need to make 4 mounting points for the subframe and then a custom shock set up

@zoom868

2 ай бұрын

Ok, thank you for responding and I'll do that

Very nice

good stuff

Such a sick build. I can’t wait to see what happens with this

always loved the Gen 7 Celica... just it always wish it had the power... now it does good ish fam

what the celica should've gotten crazy work man

Awesome build

going to be watching your channel for a long time if you keep posting like this

I want to use one of those engines in my jeep🎉

You are my hero for this build. Congratulations on the house as well!

@Jager_M

2 ай бұрын

Thank you! It’s got 4 garage stalls and I’m loving it!

AWESOME!!!! WISHING YOU THE BEST BRO

Dude that’s sick! Definitely going to stick around and see the progress. 🙏

Cool build, also sick you bought a house. Looking forward to seeing more of this project man

if you make an fr or a 4/awd out of this celica you win

Sub’ed. I like where this is going. I didn’t have to guts to do something like this on my 2zz 7th gen. I can’t wait to see more.

those headligts look amazing man, new view for sure

This is great, hope you’re channel takes off man!

This is awesome man! Subbed to see where it goes!

Using a black leather seat as a creeper is insane lol.

@Jager_M

Ай бұрын

It’s just my relaxing chair when I wanna sit down, it’s actually the passenger seat but I plan on replacing the seats at some point

This is sick! Keep it up!!

This is wild!!! I always felt this gen Celica should've been rwd with its aggressive styling. Keep up the great work and can't wait to see it running!

Appreciate the update bro, good work too

@Jager_M

2 ай бұрын

Thank you

Ambition for the Win !!!

Headlights really modernise it.

@Jager_M

2 ай бұрын

They work for the idea I had but I really wish someone could professionally make them so they would come out better

Such an amazing build! I look forward to see it finished. I hope you focus on reliability vs power because Celica is light and 2jz turbo stock is already powerful enough. Having a lot power is cool and all but Too much power can become undrivible and unreliable.

@Jager_M

2 ай бұрын

Kind of my plan with the car now is just see if I can get it finished and use it as a street car for fun and shows and just to test what I know and learn things along the way

Call haltech for help in run start with labtop there great an love project I be watching u 😅

Excellent !

Absolutely insane though great job I hope I have the nuts to attempt something like this one day

@Jager_M

Ай бұрын

Just do it, I thought I would be in collage debt and struggling in life right now but life took a different turn and I’ve just been putting work in and now I’ve got two cars a bike and a house at 19, thought things were impossible and proved myself wrong, don’t doubt yourself until you’ve tried with everything you’ve got!

I would be more inclined to do something like this if I understood the wiring aspect and knew how to weld. Sotering is one thing but a engine swap wiring is another animal.

@Jager_M

2 ай бұрын

Wiring is definetly a whole other animal, I think what helps me is most of it is either a positive or negative and depending on the wire it might change voltage but all the wiring does is connect the electrical parts. Also definetly testing my skills with this project

My brother in christ PLEASE upload the results xDD I'll be hella watching your channel like a hawk from now on xD

@Jager_M

Ай бұрын

Working on it! I’m still figuring out how to get the negative signal from the ecu to spark the plugs, the coil pack is looking for a positive signal so I’ll either convert the signal or use different coil packs that spark off of a negative signal wire, currently looking into 2zz coils

That's Cool

you need more subscribers and support this is huge, subscribed

@Jager_M

2 ай бұрын

Thank you for the support! I’m hoping I can use KZread to support these projects once the channel is big enough

@supboy666

2 ай бұрын

@@Jager_M I hope so too you deserve it. this does alot for the car community. Good luck here waiting anxiously.

Keep it up ! Just subbed !

nice man looks great!

It should have it's hood back.

i love you for this

Dope can’t wait to see the finish build !You got a new subscriber but what is that song name 😅

@Jager_M

2 ай бұрын

Rameses B- keep you, I find all my music on NCS’s KZread channel

I wanna see how you make those lights, i wanna do something simillar with the sc

@Jager_M

2 ай бұрын

They aren’t good quality I will say, I modified the original lights with a dremel and glue and mounted pod lights with a light/turn signal stop to get the look

Wish Toyota still knew how to build good cars. They lost their way back in the 90's.

@Jager_M

2 ай бұрын

Personally I think they are getting back into making some decent cars but it’s definitely not the same as they used to be

Omg youre building what everyone wished Toyota would have done with celica , so is it gonna be RWD converted too?

@Jager_M

2 ай бұрын

Yup, I put a g35 subframe in the rear

Looks like what i had envisioned for my Gen 6 Celica. Please tell me that exhaust pipe ain't going to be staying and you're going to put an actual exhaust on?

@Jager_M

2 ай бұрын

Nah that’s just for texting, later I’m going to make a 3” exhuast run out the back

2j prices be crazy. Im tryin to swap my mk3.

@Jager_M

2 ай бұрын

Gtes are expensive but I got a ge and swapped the pistons, they can handle almost the same power just by changing the rods

@jacksin3323

2 ай бұрын

@@Jager_M did you have to drill out the block for the oil squirters to the turbo?

@Jager_M

2 ай бұрын

I didn’t drill for oil squirters although you can do that but I did have to drill for the oil feed on the side of the block for the turbo. The he and gte block are the same, the ge just doesn’t have everything milled out that the gte uses

@jacksin3323

2 ай бұрын

@@Jager_M ive seen that. Its a flat spot in the casting. I may just go the 1jz-gte route for ease, cuz i want this build done asap. Theres a 1j and r154 for 3700 i may just jump on.

RWD or AWD? 1.6 GR engine from Yaris/Corolla would be a bomb, too.

@Jager_M

2 ай бұрын

I’m just doing rwd but later I want to build my ideal celica and it would basically have the power train like a gr corolla

@raverick187

2 ай бұрын

@@Jager_M Nice! Please measure your car center of gravity/balance (roll center), to determine where to put some stuff, for better performance overall. That car, at the end, sure need Supra wing itteration. Great build, man!

@Jager_M

2 ай бұрын

I’ve got a TRD celica wing I was going to use and some photos of a body kit I was going to get but that’ll come later when I get to body work

Man I need to know how you did those headlights

@Jager_M

23 сағат бұрын

Used a dremel on the original housing and bought new light to install, I based the off r35 headlights

@REVOLUTIONS-EDGE

20 сағат бұрын

@@Jager_M but the white covering on it? 3d printed or really good bondo work lol

@Jager_M

12 сағат бұрын

Bondo work with vinyl applied over it

what the f... ❤

I feel like this project will not get finished by you 🥲

@Jager_M

2 ай бұрын

I accept that as a challenge