Must see PHENOMINAL Build tour ! | DIY Fuso FG Overland Build
Автокөліктер мен көлік құралдары
SPECIAL! - Walk around tour of Pierre-Carl’s DIY build 2013 Mitsubishi Fuso Canter FGB72S! Pierre-Carl has done an absolutely phenomenal job of a ground up build on this truck, and the results of his efforts shine through! From the box construction, to the interior cabinetry, and everything in between - Pierre-Carl has designed, built and assembled this truck with his own two hands! If you ever needed inspiration to pull off a project like this, HERE IT IS!!
THANK YOU Pierre-Carl for showing us around!
As always, I like to leave useful information in the video descriptions - and this time is no different. There are a couple of things we talked about in the video that can be hard to find, so I’ve placed some links below.
One piece of information I missed putting into the video is the size of this habitat box. The length is 15’8”, it’s 89-1/2” wide, and 84” high on the outside.
These are purely informational links, and there is no affiliation to these companies other than the materials used were purchased from them.
If you are located in North America and are looking for upgraded parts for your FUSO, you’ll probably want to check in with Fuso Off-Road. The Super single rims on both trucks were purchased here, as well as the bumper, flares, and suspension on Pierre Carl’s truck.
www.fusooffroad.com
The gasket seal that Pierre Carl used on the cab pass through came from Expedition Upfitter. If you are building a vehicle, they have lots of other items you may find useful!
expeditionupfitter.com
And here is the seal www.expeditionupfitter.ca/col...
Since this is an information share, I’ll throw one more useful link in here for anyone trying to find Fuso related parts. ROAD Overland has some good, hard to find bits - and are worth checking out. No affiliation, just information!
roadoverland.com
If you are interested in any of the items I use in my build, check out the video descriptions of all the other posted videos, there are lots of links related to the content of each video!
Пікірлер: 39
Stunning build, Pierre-Carl has created a masterpiece of functional and beautiful design there. I'm also very impressed with his selection of materials and simplification to keep weight down where possible. The fit and finish is something we all should aspire to. It's a credit to his craft and skills in every way. I also think purchasing a 'parts camper' was a fantastic way to get a good package of items that suits your needs. I installed a cable interlock for the brush bar and cab tilt on our Fuso. It's all well and good to remind yourself before tilting the cab, but it's that one time when you are a bit flustered (non-starting truck partly blocking a street, for instance 🙄) and only think you've already dropped it that was enough to convince me I should design an interlock.
@BruceandKrista
8 ай бұрын
That’s a great idea! Do you have a cable that runs from the bumper up to the lock handle?
@contributor7219
8 ай бұрын
@@BruceandKrista Yes, it's just a standard industrial push-pull cable available from a number of suppliers. After drilling a small hole through the bumper behind the brush guard flange, I welded a small u-bracket welded behind the bumper for the threaded cable sheath. When the brush guard is closed it simply pushes that end of the cable flush with the bumper. The other end engages in a hole in a small tab welded to the safety lever for the cab tilt mechanism. You can even run the cable along the chassis rail to keep it looking 'factory'.
@BruceandKrista
8 ай бұрын
Good stuff!!!
keep posting! I'm beginning to plan a UNIMOG build and your videos are so so valuable in helping me wrap my head around it!
@BruceandKrista
7 ай бұрын
Awesome! Mog’s are super cool! Should be a new video up for you every Sunday night! Thanks for watching!
Nothing beats self built! Nice truck!
@BruceandKrista
8 ай бұрын
It sure will be hard to beat this one!
Beautiful build. I’d like to build my own fuso someday and this is definitely very inspiring for me.
@BruceandKrista
12 күн бұрын
Awesome! I hope to finish my build some day!! 😁
Exceptional build and quality well done
@BruceandKrista
2 ай бұрын
Agreed, he did an amazing job!
Extremely nice build, Pierre-Carl you should be very proud. We are planning to head to East Canada in about 6 months, currently cruising around B.C. With a huge amount of luck, hope to see your rig on the road next year. I also like the lower storage box configuration, optically, makes a large box look a little bit smaller. Bruce and Krista, hope you picked up a few great ideas from this build :-)
@BruceandKrista
8 ай бұрын
Absolutely did! Let us know when you’re passing through!
@pierre-carlboulanger7872
8 ай бұрын
THANKS! If you ever pass through the Laurentians region (1 hour north of Montreal) let me know!
@toughandtogether
8 ай бұрын
@@BruceandKrista Will definitively drop in and say hi. And check-out your rig.
Great build and wonderful craftmanship. Puts Bruce and Krista under massive pressure..... although they say pressure is just for tyers!
@BruceandKrista
8 ай бұрын
You bet it does! Can we say that massive pressure could be measured in BAR… and this he has set the BAR high?! 🤣
Great tour and build. 💪🛠👍🌞 Thanks for sharing 👍 8
@BruceandKrista
5 ай бұрын
Thank you!
Great video again. Thanks . That is really impressive all the work he did. It sets a pretty high bar for the finish for all us Fuso converters and anyone else self building. Also really interesting about his priority for the wheels and suspension. We really seem to struggle in the UK to source the rims and leaf springs. Seems like Canada, USA and Aus are much better catered for in Fuso upgrades.
@BruceandKrista
8 ай бұрын
You are for sure right about the bar being raised!!! We don’t have a lot of choice for aftermarket parts over here in Canada either (basically, one option!) - those Aussies are spoiled!! 🤪
Beautiful build.
@BruceandKrista
2 ай бұрын
It sure is! Pierre Carl has a lot of talent!
Incredible job mate 👌👌👌
@BruceandKrista
4 ай бұрын
He did an amazing job!
Looks so good. The boxes are incredible. Would love to learn more about how he made his undercarriage boxes out of alupanel! How are they fastened together? Rivets and Sika252? Also super curious about the truck's weight vs gvwr and the dimesions of the habitat.
@BruceandKrista
8 ай бұрын
The 1x1 box tube frame inside the lower cabinets is welded together, then the Alupanel is bonded to the aluminum using 3M VHB tape. I hope to do something very similar (though slightly different!) The length is 15’8”, it’s 89-1/2” wide, and 84” high on the outside. Not sure if he has weighed it?
@theborednerds
8 ай бұрын
@BruceandKrista thanks! That's the size I'm planning for, too. What does that put the whole vehicle at? Probably 22ft long and 11ft tall?
@pierre-carlboulanger7872
8 ай бұрын
@@theborednerdsThe dry weight is 5200kg, has for the mesures you are verry close 21' 8" long and 11' 2" tall!
where did he source the storage doors? and what windows are you using?
@BruceandKrista
8 ай бұрын
There are many window and door vendors on AliExpress and Alibaba - best to take a look at which vendors have what best suits your needs.
@largemarge1603
17 күн бұрын
@travis, 2003, we built our ExpeditionVehicle on a 1996 Ford CF8000 commercial truck. . Our windows are 3010 (three feet wide by a foot tall) dual-pane sliders designed for a stand-still house. We mounted these at our eye-level standing inside, about eight feet above pavement. . Over two decades full-time live-aboard, zero issues. And small windows are small targets for branches and jealous by-standers.
How did he recolor the cab interior? Dash paint or something better?
@BruceandKrista
8 ай бұрын
I believe he used a paint that is designed for interior trim - but I’m hopeful that he can provide a bit more detail here!
@pierre-carlboulanger7872
8 ай бұрын
To paint the plastic, I first cleaned the parts with a degreaser soap then lightly sanded and rinsed well with water, before painting I applied a plastic adhesion promoter in aerosol then several coats of acrylic paint for plastic and vinyl. That said, the paint is not resistant to scratches has much has i hoped, I plan to do touch-ups as needed! It was a lot of work and maaany of cans of paint, but I don't regret, the pale blue whas making me sick😆 Let me know if you plan on doing it and need more infos. good luck!😉
@TheItinerantCraftsman
5 ай бұрын
Same stuff I used in n the past. Yeah, it’s not scratch proof. Just finished my interior in all black
SO nice not to see any camo or someone's national flag.
@BruceandKrista
2 ай бұрын
It’s a great clean look isn’t it!