MUST HAVE when working on your Corvette's clutch or torque tube
Автокөліктер мен көлік құралдары
97-04 REMOTE BLEEDER CLUTCH SLAVE CYLINDER:
www.corvettepartscenter.com/p...
05-19 REMOTE BLEEDER CLUTCH SLAVE CYLINDER:
www.corvettepartscenter.com/p...
97-13 CORVETTE UPGRADED ENGINE PLATE / REAR MAIN SEAL:
www.corvettepartscenter.com/c...
www.CorvettePartsCenter.com
Пікірлер: 41
you just answer my question that I just posted on KZread. I was cleaning my c5 Z06 corvette an hour ago and I saw a long hose coming from the bottom of my engine and place next to my clutch master cilinder and right away whent to KZread and search a d you gave me the answer. My Z06 engine was done by previous owner she is 650hp I guess he did this when he took the engine down. Thanks again you are the best I always go to you when I have any questions about my Z06 baby
Hey 99 frc owner here, been there, did that, Great Advice. Tick bleeder is awesome! I also replaced both couplings, and all bearings.
I drive mine all year
@davidncw4613
4 ай бұрын
All Year OMG......in the winter I use mine for a chicken coop!! lol cheers!
Good tips, Lyle
TY Lyle soooo much.
Might need both of these soon.
Awesome as always. Please do part two on LS7 valve drop
C-5 owner here, thanks, Lyle!
Awesome! I've had my Z06 for about 9 months and have seen this random braided line in my engine bay and didn't have a clue what it was, lol. Now I know! Thank you sir..
@yourewrong4399
Жыл бұрын
So dang lucky
Merry Christmas Lyle and the whole crew
I will definitely let you guys service my torque tube and clutch on my 2018 GS Z07 M7 Corvette !!!!! I live in Atlanta
Going to do torque tube, timing cover and rear main seal soon. You can beat I'm getting everything from C&S Corvette's
Thank you Lyle for all the tips and tricks that you give us Corvette enthusiasts . Hey Lyle I never did hear how you liked the new Continental tires on your vette . I have the Mich P 4s on my 07 C6 Z . Throw out a video tell us about your experience with them please ? Thanks guy's
@csvette
Жыл бұрын
I LOVE them. Highly recommend!
Good video, Lyle. Does anyone make paddle shifters for the C4?
pls also add in the alignment tool for the rear main seal. Ive got a set from SAAC CIty Corvette. Lyle, you should carry their tools to sell with that rear main seal. Thanks for the videos
@csvette
Жыл бұрын
Chris, our rear main seal plates come with the plastic alignment plate in the seal already--The unit in the video has had it removed already. Is this the tool you are talking about? Lyle
great videos. can you comment on the Corvette engine in the 1994 TransAm .Same problems?
@csvette
Жыл бұрын
Identical LT-1 problems, just de-tuned slightly for the F body. Lyle
When installing the remote bleeeder line use caution and locate/tie it back so there is no chance of it contacting the left side header. We can't afford to have any more catch fire.
@csvette
Жыл бұрын
Absolutely, yes! Lyle
I had to do the plate in my 2010 Camaro with the LS3 due to a leak at only 20k. Now I also have a 2013 C6 with the LS3 and everything needs to come out to do some trani repairs, I have a vibration coming back through the shifter when under load in fifth gear. I've already got the bleeder line purchased, I guess I better do the plate even though it's super low mileage, under 17k miles. I'll also be looking at replacing the clutch and slave/throw-out assembly as well because I'm hearing an occasional noise when depressing the clutch pedal. Somebody must have went nuts in this car before I bought it.
@rrf6747
Жыл бұрын
With only 17,000 miles how nuts can you get ?
@rrf6747
Жыл бұрын
On your camero did you use the plate that Lyle sells ? Did it solve the problem?
@kfh1
Жыл бұрын
@@rrf6747 I bought the Camaro as a Gm Certified Pre-owned Vehicle, and GM replaced it under warranty, so it's a GM plate. I don't know if it was an upgraded version or not, I wasn't aware about the issue with the plates at that time, but I was told that there was a service bulletin on the problem. So far after 12k and 4 1/2 years I have no new leaks. As far as the Vette goes, I have no answers. Again the car was used and according to CarFax it had 8 previous owners, 5 dealerships and 3 private owners, so it got passed around a lot. I made the mistake of buying it without a test drive, the dealership I purchased it from doesn't allow test drives, if you can believe that. The Vette looks like it's brand new, so I wasn't expecting this type of problem with such low mileage, and I really wanted it badly. I've already replaced the harmonic balancer as well.
@rrf6747
Жыл бұрын
@@kfh1 wow Iv had my 2012 Corvette for 5yrs so your post scared me lol. I haven't so far experienced any of the promblems you mentioned got 42,000 miles hope you get it sorted out. That was my biggest worry when I bought my vette that it would become a headache. I also bought mine through a dealership
Anyone know what causes a clunk/click when going from gear to neutral and letting out the clutch pedal? It only does it going into neutral. I am guessing linkage but don't know.
Great tips, if you already have a tick clutch master cylinder in there with a bleeder line connected to it, do you still need a bleeder line from the slave cylinder?
@csvette
Жыл бұрын
That is a great question! I don't know if the bleeder on the Tick unit allows bleeding of the whole system or just the master, but I will find out! Lyle
Hey Lyle can you make a C5 video on mileage. Is high mileage a good thing or bad thing when buying your first C5. Do you know how many miles you can get out of a LS1 motor? I seen a C5 Corvette with a 180,000 miles for $10,000.
You only carry the plate for c5,6 not C7 on your website. Why? Are C7 plates not prone to leaking? Thanks
My clutch pedal is staying down sometimes. It works off and on. What are your thoughts?
@csvette
8 күн бұрын
Clutch master cylinder is failing internally. Replace it, and you shouldn't have any more issues...unless you are seeing drops of clutch fluid on the ground...that would be a more serious issue. Lyle
*sigh* my remote bleeder is pretty old and just popped open today, while in traffic, like a hotdog boiled to long lol
Out of curiosity how hard would it be to turn an auto into a manual.
@csvette
Жыл бұрын
Mechanically, it would be fairly straight-forward: Change the trans, diff and torque tube; add clutch pedal assembly and all of the associated hydraulics. The real issue is cost, because by the time you buy everything and have it installed, you could pretty much afford to buy another C5 that already has the manual. Lyle
If you only listen to one piece of advice, listen to what he said here!!!
Hey Lyle. Watch you every week. I have a question. Coming home from work today I’m driving along listening to the radio when the radio completely shut off. Then I noticed none of my instrument gauges are working either or my power windows. The car did stay running and I got home. When I got home I shut the car off for about 5 min. Turned the key on and the instruments did their sweep. The car started and the gauges worked. Just wondering if this is a common problem or this could be serious. Appreciate any input. Thanks Lyle. John Riverview fl. 2003 c5
I did the clutch and your rear main myself on jacks and the seal is leaking a little because I probably torqued it ever so slightly wrong… oh well live and learn but definitely not doing a clutch job myself ever again at least anytime soon. I also forgot to put a bleeder line on the new slave as well it was a disaster project 😂 but hey at least it still drives