could have used those offset gaages yesterday, but Alas I work on a 90's model Amada
@jordanhowell38702 жыл бұрын
is that a battery box?
@duramax787 жыл бұрын
What is that wire and boxes for.?
@macmaniacal
7 жыл бұрын
Probably to zero out the press point and get an accurate angle. Seems like it's got some spring to it.
@raymondjbarron
7 жыл бұрын
Derek Kuraitis they actually scan material thickness and compensates the tonnage for yes an accurate angle but hardly required depending on the quantity and consistency of the blank the parts were cut from.
@matheiuss9760
7 жыл бұрын
Raymond Barron Wrong. It's called ACB System. It uses a series of followers on a particular upper tool to measure the angle and the elastic return of the material in order to get a perfect bend that is usually withing +/- 0.3 degrees of the programmed angle. TRUMPF provides upper tools equipped with that system for pretty much all of their series...while it's relatively expensive it's also very useful expecially when paired with a bending robot like the BendMaster 60.
@kimjoseph19365 жыл бұрын
motor drive x1 ko...wt problem that one after d bending machine not working
Пікірлер: 10
machine is top quality
Perfect!
could have used those offset gaages yesterday, but Alas I work on a 90's model Amada
is that a battery box?
What is that wire and boxes for.?
@macmaniacal
7 жыл бұрын
Probably to zero out the press point and get an accurate angle. Seems like it's got some spring to it.
@raymondjbarron
7 жыл бұрын
Derek Kuraitis they actually scan material thickness and compensates the tonnage for yes an accurate angle but hardly required depending on the quantity and consistency of the blank the parts were cut from.
@matheiuss9760
7 жыл бұрын
Raymond Barron Wrong. It's called ACB System. It uses a series of followers on a particular upper tool to measure the angle and the elastic return of the material in order to get a perfect bend that is usually withing +/- 0.3 degrees of the programmed angle. TRUMPF provides upper tools equipped with that system for pretty much all of their series...while it's relatively expensive it's also very useful expecially when paired with a bending robot like the BendMaster 60.
motor drive x1 ko...wt problem that one after d bending machine not working
eu também já dobrei muita peça