jokes on you, im a camry lover watching this

@BarkLife

2 жыл бұрын

Lol that's ok Camrys are awesome!

@crogunson4784

Жыл бұрын

Bulletproof mate lve had 3.

@dirasmalleyes

Жыл бұрын

I am a gen1 rav4 lover

@kemzdon8245

Жыл бұрын

Jokes on you bud, Corolla is superior.🤣😭🤘🏽

@chevalsauer

Жыл бұрын

Me two

Thanks for this Video, not just for comparison but for vividly and technically explaining how the Complete engine system connects, the transmission, ECU and how 3sgte /5s Fe share common features and also interchangeable , let me get my note pad bf I get blown up with excitement from what I learn from you, thanks man👊

@BarkLife

Жыл бұрын

Lol have a great day.

fyi. You can use the S54 transmission on the 3sgte with 300 whp all day long. TCS Motorsports who has pumped out hundreds of 3sgte swaps with S54s has said that. They actually say they have more E153 problems but then again people tend to beat on the E153 through the years. You just don't want to go around launching the S54 all over the place. The S54 has shorter gears so that may be better as well depending on what you use the car for, etc. And you will want to upgrade your axles cages as that is the weak point once you start modifying the engine for more boost. TCS or ATS Racing can help you out with that as well. Back when I did my GEN3 swap I purchased an entire 1998 MR2 half cut with the body harness but that was back in 2008. There was a website that I'll link if I can find it that showed all the wiring, etc from a na to 3rd gen but my chasis was already a 93 Turbo chasis.

Jokes on you, I'm trying to restore my 5th generation celica with a 5sfe

Put those engines together and build a 5sgte ;)

@sp33dybiscuit

Жыл бұрын

Yes 😮

Can't remember what those extra plugs were for AC I think, I did a 3rd gen swap in my Celica but I used my original 2nd gen 3sgte harness and aftermarket ECU, it was easier than trying to use the st205/3rd gen ECU, engine is simple enough to get running, most people end up needing the MAP sensor, ignitor, intercooler pump/temp sensor because it's Missing from the engine swap, I had a FMIC and PNP ecu for the 2nd gen, which essentially made the 3rd gen swap plug and play, had to swap the knock and IAT sensor but that was really easy, also modified the throttle cable bracket, it seemed daunting at first but all the issues were very simple for me anyways,

@BarkLife

2 жыл бұрын

My engine swap is 100% complete as far as sensors and such. This came out of a 92 na mr2. I didn't realize how much the chassis harness matters on this swap. I have a few different guys trying to offer solutions so I may possibly have a way to make this work! Thanks for taking the time to watch and post.

Use wire gap for all your wiring needs, you can order your new engine wiring harness on “prime mr2” that will plug into ur existing model year mr2 n/a. Especially since your going from n/a to gen 3 . If you were doing a 91/92 usdm 3sgte into a 91/92 n/a it would be plug and play and you would just need to mess with a few wires and it’s documented in the forums for the diyers, but gen 3 is a bit more hidden work that only the guys who have done it will know how to do it:

@BarkLife

2 жыл бұрын

Thanks for taking the time to watch and respond i need to look at what everything is going to cost for wiring. If it gets to far on the steep side it may be time to look at selling the 3s and looking at other options! I am glad that I got the e153! Again thanks so much for watching and taking the time to respond thats awesome I will check with prime mr2 and check out wire gap I hadn't been to that site before! it is now favorited!

@BarkLife

2 жыл бұрын

350 isn't bad at all ill have to look into that more ! Thanks so much

@BarkLife

2 жыл бұрын

I ended up using wire gap and harness is back today! super stoked! Love his professionalism will be using them for anything like that! Cant wait to fire the mr2 up!

I cant disagree with you, I had a 1991 sw21 mr2 and I loved it with the 5sfe, but I also had a 1997 celica GT 5sfe, I also had a 1994 ST 7afe, and now a 1993 prizm 7afe, and am considering buying another celica GT 5sfe, we shall see

looks like you have almost everything to make a 5sgte

Please give us a solution video on the plugs when it’s sorted. 👍

@BarkLife

Жыл бұрын

It has been sorted, the extra ecu plugs are traction control.

I have a celica with the 5sfe and I was wondering if it would be worth an NA 3sge swapping it. I have an automatic transmission and I was wondering if it would still work with the 3sge. I don't like manual because I drove manual a lot for work and I want to enjoy cruising in my Celica without worrying about the gears and clutch.

@BarkLife

Жыл бұрын

Honestly, people have turboed the 5s with a decient amount of success.

Maybe I have a Camry that’s near to my heart.

@BarkLife

6 ай бұрын

That's awesome I have seen some fast camrys to. Great cars!

So probably not gonna get answered but I have a question. I got a 5sfe in my Camry but it’s California reg and not federal reg. I wanted to run a turbo but the manifold has a cat. What all would I have to change to be able to run different header

@BarkLife

Жыл бұрын

Honestly, the best option would be switching to a standalone ie ecumaster aem haltec all great options. From there you are replacing the manifold anyway so dosnt matter what your stock manifold is anyway. There are many turbo 5sfe out there. Lots of great info out there. I have toyed with a 99plus 5sfe bottom end for my 3sgte head to make a stroker motor.

Just got am late '92 mr2, 5sfe now has a turbo and bored over 80. Crazy. Let's not blow it haha

@BarkLife

Жыл бұрын

5sfe can make good power im apart of alot of groups on facebook. do you have rods and pistons ?

So. Im attempting to do a 5s swap on my 86 celica st162. Have any experience with this car?

@BarkLife

Жыл бұрын

No unfortunately but great chassis though.

It is slow...but damn it is reliable....1998 camry 5SFE did do a V6 strut upgrade....but I am curious as if how I get more power...but keep the economy (mostly) and reliability!!

@BarkLife

9 ай бұрын

98 and up have the strongest blocks so that help with holding power and reliability. Ty for watching

you do mus plug on your car for enginebay fan ecu. its an little black or gray ecu. and the wiring of you radio anten goes from ecu to anten. and new mr2 has cruise crontrol , the wiring of this re in the same cabele stack. you need to know diffrence between years, types and usa europe and jdm, but you dont need all of these / try first to start. just onlye a few wires. let de rest for later.

@BarkLife

Жыл бұрын

Thank you so much for your reply! We did get it Rollin I love the mr2 so much.

Wanting to swap a 3sgte into my celica

@BarkLife

6 ай бұрын

Amazing motors

Jokes on this is a brz own wanted a powerful beams engine

i am the original random joe

@BarkLife

9 ай бұрын

Lol

Don't they combine these two engines now like a Franken Stein engine 5S block 3s turbo head

@BarkLife

Жыл бұрын

Yes sir the 99 + Camry 5sfe block is just a bit more durable also you gain the extra displacement of the 5sfe.

@kingmaybus8409

Жыл бұрын

@@BarkLife so now my curiosity is peaked which is better the hybrid motor or the beams 🤔 I'm just pre planning and researching options I'm currently stripping down a mk3 and I'm going a different direction kind of a lotus approach taking weight out and I'm not just throwing a jz in to make up weight with power I want it nimble like my s13

@BarkLife

Жыл бұрын

@@kingmaybus8409 That would be cooI. I always thought it would be interesting to do a full Castrol Toms 3sgte build on my mkiv.

I'm a random Joe I even own a lancer 😊

@BarkLife

11 ай бұрын

Heck yeah! Lol, thanks for watching!

Check out Sarah n tuned KZread channel she did a 3sgte swap on a mr2

@BarkLife

Жыл бұрын

Mine is finished now runs awesome about to do my nephew's with him tomorrow! I will have to check that channel out I love mr2 content.

Probably solved already

@BarkLife

Жыл бұрын

indeed ! car runs amazing.

Celicas wya?

@BarkLife

Жыл бұрын

Celica Camry mr2 all have 5sfe as an option :)

im random joe

@BarkLife

Жыл бұрын

Me to!!

The S54 is better for way more than 180hp. Plenty of guys run it with 2GRs due to its lighter weight compared to the E153, and the shorter gearing, which is great for autocross or just around town. No more S54 slander please lol.

@BarkLife

Жыл бұрын

Lol I hear ya. I gave the clause of what I have heard and read. One of the big people to pushing me away from s54 was an auto x guy. He had been through several s54. He was also working at a highly competitive level with it. He said e153 all the way. I never gave the s54 a fair chance from my own experiences. It seems a lot like the w58 vs r154 in the sc300/supra world. I ran a w58 in my mk4 supra at 500whp for 6 years and 50k miles no issues. I did eventually upgrade to a cd009 because I was pushing my goals to 750whp.

@grimson

Жыл бұрын

@@BarkLife Don't get me wrong, I'd swap my S54 for the E153 in a heartbeat. It's just better than people generally give it credit for.

Celica owner, but with 5sfe lmao

@BarkLife

Жыл бұрын

I want to own a gt4 so bad lol Celica are awesome cars

@markmas9135

Жыл бұрын

is it reliable

I have a Celica lol not a MR2

@BarkLife

2 жыл бұрын

Love the celica really want a gt4!

Only person whols going to comment on this... "BUSTED" Way to call us out in under 20 seconds :D

@BarkLife

Жыл бұрын

Lol

im a lost bmw guy, the 3gs-gte is better

@BarkLife

Жыл бұрын

3sgte is better. What kind of bmw?

@user-ws9jj6ts3s

Ай бұрын

​@@BarkLife his BMW means Baby Mother Woman...lol