This channel is dedicated to following us as we build our fleet of Toyota cars for drag racing/ Autocross ect. We are a long time Toyota loving family and look forward to years to come of fun!
Going to try and make a big push after work today who knows might be able to get it close to starting or started
@svang19917 күн бұрын
The MKV Supra is a goat. IYKYK. Objectively speaking, the MKIV does not even compare in any performance metric to the MKV.
@BarkLife6 күн бұрын
It's hard to compare spec to spec on a car that's 30+ years apart. However, there are certain things having driven both and owned a mkiv for 16 years that the mkiv has over the mk5. With that being said, there are some cool things to the mkv, but at the end of the day, I would still own a mkiv over the mkv. I own neither as I sold my mk4 last year.
@edsiemens98947 күн бұрын
Roll some coal brother
@BarkLife6 күн бұрын
Lol
@arrowdino967913 күн бұрын
sounds amazing i’m about to run the same setup. any problems with the hks bov?
@BarkLife12 күн бұрын
No great bov super fast response
@ElRayDelRio15 күн бұрын
I initially was snooping Amazon for a drop in filter replacement in my QX80 but what I had ended up doing was ordering a 3.5" maf tube for the Nissan gtr. I then ordered a 3.5" aluminum pipe and put a cone air filter on the end. I kept the factory slip tube from the throttle body and just deleted the airbox. It's not much a difference than a drop in filter but I'd like to think so with the massive conehead 😅
@BarkLife14 күн бұрын
Lol, yeah, I think a good portion of an intake is for aesthetics and that sweet induction noise.
@ElRayDelRio14 күн бұрын
@@BarkLife true that! It explains why this was my 1st modification to the truck but the engine can only pump so much air. I think for the money, Id save it and put it elsewhere like in a handheld flash tuner or even a piggyback ecu from Uprev would be well worth it! Then convert to run E85 fuel for more timing and leaner a/f ratio but thats just my two cents.
@ElRayDelRio14 күн бұрын
@@BarkLife cams also go along way in these motors. Jim Wolf is somewhat local and I've been eyeing their CS2 cam kit with beehive springs on intake side 🙃
@edsiemens989420 күн бұрын
Looks amazing
@BarkLife20 күн бұрын
Thanks
@bobthebuilder2124720 күн бұрын
Sweet but ugly lol. Sounds like aomwthing i would say. Build looks killer. Keep at it
@BarkLife20 күн бұрын
Lol yeah and thanks :)
@melvingrimes788624 күн бұрын
Piggybacks work on the older stuff but once you get into the 2jzge vvti the tune drifts to bad and constant returning is required.
@BarkLife14 күн бұрын
This is true, unfortunately. 96 and new jz . Leaving it in open loop can help with this.
@melvingrimes788614 күн бұрын
On the 2000 2001 GS300 the hot ticket is using a Aristo TT ECU. It pretty much is plug and Play just got to move a couple of wires and add a couple of wires
@AyaanNauflaoon26 күн бұрын
The Toyota MR2 is my dream car but unfortunately in my country only 10 were brought
@BarkLife26 күн бұрын
That is a bummer. What country?
@AyaanNauflaoon26 күн бұрын
@@BarkLife Sri Lanka
@AyaanNauflaoon26 күн бұрын
@@BarkLife my uncle had a mk4 in Australia but in Sri Lanka they are pretty rare only 23 were brought but you can buy one here for 30k thousand dollars which is kinda cheaper than USA right but it's REALLY hard to find a supra for sale here
@AyaanNauflaoon26 күн бұрын
Wow I'm 12 years old and when I grow up I wanna study motor engineering but unfortunately my dad does not have interest in cars that much but I know a lot about cars the car you are building is a Toyota MR2 with a 2.2 litre 5s-Fe engine producing 138 HP stock I know how a cylinder works and the function of valves and I spend countless hours seeing videos about cars I wish I had a dad like you but maybe one day I can make a car with my son thanks and may god bless you for being a lovely father ❤
@BarkLife26 күн бұрын
Mad props for being so knowledgeable already! Share your passion with those around you and you'll find mentors and friends to learn from along the way. My Dad and I didn't work on cars together either, but it's great to find other common ground too. For my dad and I it was fishing and work projects, but sharing what you know with your own son is more rewarding than I can say. Awesome to see guys like you with initiative taking the torch for the next generation.
@chrishendricks593728 күн бұрын
These guys aren’t just wrong, they’re confidently stupid.
@edsiemens989428 күн бұрын
18 all day
@edsiemens989428 күн бұрын
Those are sick!!!
@helenebabineau7103Ай бұрын
Love MR2’s
@BarkLifeАй бұрын
@helenebabineau7103 thank you so much for watching. I sold my mkiv supra because I never drove it or worked on it over my mr2. The mr2 is getting huge upgrades the next few days
@helenebabineau7103Ай бұрын
@@BarkLife thanks for taking the time to reply, I have a 1992 SW20 MR2 with a 5sFe engine and I’m going to mod it soon. My family bought this car back in 1996 so this is the oldest time I kept a car for.
@BarkLifeАй бұрын
@@helenebabineau7103 That is amazing :) so cool to have something that has been passed down in the family. Mr2 is such a worth while car to keep and restore. Such a unique platform :) If you end up making videos about it count me in for a sub:)
@myideas7311Ай бұрын
Thanks for sharing your video . I plan to buy this phone in 2024 .your are a good man
@iroychittick9077Ай бұрын
I see the egr delete
@iroychittick9077Ай бұрын
That is a a4
@BarkLifeАй бұрын
what makes you say that ? it is 100% 3 lobes on both cams :) ty for watching
@tez369Ай бұрын
We’ve got a 2003 GS300 that we are planning to boost, this is very informative 🤙🏼
@BarkLifeАй бұрын
So glad it was helpful :)
@coreynewman4587Ай бұрын
did you change the sprocket at all? I'm trying to source a #420 chain sprocket for the rear
@BarkLifeАй бұрын
No stayed with stock
@dennis_haАй бұрын
I actually have the same watergate at this one for my is300. By chance could you share where you bought that spring at? I am also aiming for lower boost
@BarkLifeАй бұрын
I bought the springs off cx racing if I recall.
@nyvinchenz9430Ай бұрын
Did the kit come with new arp flywheel bolts ?
@GasBrakeSimАй бұрын
SUBBED . Thank you brother !!!
@BarkLifeАй бұрын
Thanks for the sub! I hope the video helped
@naturaasolАй бұрын
Where can I find a new sunroof? I'm really just looking for a seal but I can't find it anywhere
@BarkLifeАй бұрын
Dealer would probably have the seal my local junkyard had the glass and seal
@naturaasolАй бұрын
@@BarkLife Thanks so much! I spoke with the dealer, they said it would $150 for just the seal 🤯! So I'll definitely be taking a look at the junk yard! Much appreciated 🙏🏾
@claudioinfante3409Ай бұрын
Is that a supra mk4😮😮
@sebcasiez9988Ай бұрын
Hi love the go kart series. I want to do the chassis exetnsion for my go kart but i am not too sure what tube to use or how to mount the seat. thankyou.
@BarkLifeАй бұрын
I will try to do a more in depth video explaining material used
@sebcasiez9988Ай бұрын
@@BarkLife thanks
@warrenpeasАй бұрын
when you cut that bolt off to remove the exhaust do you have to remove any of the pipes going forward towards the motor to remove the engine or just from where u cut back?
@BarkLifeАй бұрын
I pulled the engine with the header in place if that's what you're asking
@jeremydawkins8399Ай бұрын
What model hks is that?
@BarkLifeАй бұрын
Ssqv
@claudedottin13122 ай бұрын
It. BE like that😂
@BarkLifeАй бұрын
Super excited
@TCreatorO2 ай бұрын
I cant disagree with you, I had a 1991 sw21 mr2 and I loved it with the 5sfe, but I also had a 1997 celica GT 5sfe, I also had a 1994 ST 7afe, and now a 1993 prizm 7afe, and am considering buying another celica GT 5sfe, we shall see
@warrenpeas2 ай бұрын
removing the idler pulley is not necessary to drop the motor right?
@BarkLife2 ай бұрын
Correct
@dallanlewis60842 ай бұрын
Have a standalone? Best car I've ever had btw, these are pure treasures that last forever with the proper care of course...plan on going turbo someday
@BarkLife2 ай бұрын
That car had a piggyback. My mr2 has standalone
@og234572 ай бұрын
If you have an NA mr2, you will have to spend 5k to get a transmission plus axles and swap kit. Only makes sense if you already have mr2 turbo
@BarkLife2 ай бұрын
I have a 91 na and I lsd e153 out of a gen 3 jdm mr2 swapped it. I also had a 3sgte I swapped in. My total expense for everything was 2500 with motor hubs everything. I'm now k swap with e153.
@bmwe-op4jx2 ай бұрын
any updates?
@BarkLife2 ай бұрын
Life has happened and I haven't finished the build but it is 95 % complete.
@s1ee6y142 ай бұрын
How did you do it
@BarkLife2 ай бұрын
Literally just unhooked everything and put the cable that comes from the cabin to the throttlebody
@96MustangBoy12 ай бұрын
The thing I like about this is that a lap top isn’t needed. I wished all piggyback ecu could be like this. Maybe have its own touch screen monitor.
@BarkLife2 ай бұрын
Yeah definitely simple to use no replacement for standalone though
@frankmains56982 ай бұрын
American prejudicism the scenario we live in nowadays
@BarkLife2 ай бұрын
How so?
@frankmains56982 ай бұрын
@@BarkLife people with predetermined notions against rural stations having inferior fuel compared to metropolitan areas
@BarkLife2 ай бұрын
@frankmains5698 I grew up living in the most rural areas. Just like a cars gas tank, if you have long periods before a refill, the tank has a chance to build condensation. If a station isn't heavily used, the more water that builds up. Not to mention, modern fuels are not as stable.
@frankmains56982 ай бұрын
@@BarkLife u prejudicial me replys ditto to City cars that rarely get driven excessively, they sit around with their gas tanks confensating water. Ditto the gas stations in Chicago ghettos that have highest prices in USA, where one is unwilling to spend the $, or the fact the area is so crime ridden that your afraid to be in public, hence the bars on the window and doors in. Addition to the fact that there is a sign on the locked gate that says closed, went to score be rite back. Does the gas sit around in those tanks subject to modern instabilities? So, what's very rural to you West Texas, new Mexico Indian reservation, 40 Miles East or West of Bangor Wisconsin?
@BarkLife2 ай бұрын
@frankmains5698 nw Montana/Yaak. I grew up with wood fire heat/cooking and propane fridge. The average populations in the towns I'm talking about are sub 500 people and 40 miles from the next nearest "town". Most people who have equipment or toys have their own 500 gallon above ground fuel tanks. Getting gas at an off the beaten path does have a higher likelihood of bad gas, especially since diesel is the bulk seller in these areas. Simply a sitting/volume of sitting gas issue. How often are fuel deliveries, etc. Any hoot not looking to argue my point is simply gas prices are out of hand. I enjoy lower prices then most areas due to my geographic/polical location not over taxing/regulating. Have a good day
@Mike286252 ай бұрын
I live in a rural area. Between the commuters, lawn mowers, farmers, and kids on dirt bikes, there's no way gas ever just sits around at a small station here. Gas is between 2.97 and 3.15. i think you're gauge is messed up. Do you really believe that the gas just sits there while the clerk plays banjo on the porch? That's literally dumb. Country people use gas like crazy. And it better be good or there's hell to pay if bubba gets bad fuel in his F-350.
@BarkLife2 ай бұрын
I grew up in the middle of nowhere northern Montana :)
@Bodgemiester2 ай бұрын
Welcome.to Europe
@BarkLife2 ай бұрын
Yeah, Europe prices have gotten out of hand. america is following similar policies, so we are right behind you guys.
@Bodgemiester2 ай бұрын
@BarkLife in the uk we have always paid just over twice what the usa pay. It's normal
@markhancock66942 ай бұрын
The problem with gas prices is a world wide problem. Try living in Canada with their gas prices.
@Primetimetoons-bx2mj2 ай бұрын
It wasn't a problem in the USA until Biden drained our reserves and sold them to China. We were self sufficient didn't need foreign fuel we had our own.
@BarkLife2 ай бұрын
Yeah gas is outa hand
@patricklim9092 ай бұрын
RAM, does not have 11 gal tank but 3x
@BarkLife2 ай бұрын
What ram?
@darrinscoilsclouds14982 ай бұрын
trump 2024!!!!
@GreenAppelPie2 ай бұрын
Dork
@JuanHernandez-pz2mx2 ай бұрын
You know you are getting old when you try to apply 1992 prices to 2024.
@BarkLife2 ай бұрын
3 years ago it was 1.74 a gallon instead of nearly 4 :(
@robarellano15992 ай бұрын
Your dirty finger is ridiculous, what the heck?
@BarkLife2 ай бұрын
Yeah lol working on cars and kids gokarts all day
@makecorollagreatagain18762 ай бұрын
Ooh Muffy I do want any of that country bumpkin gas eww🧐
@Chris-ts8oh2 ай бұрын
Unfortunately rual areas are disappearing.
@BarkLife2 ай бұрын
Very true
@UberDude2 ай бұрын
2 letters. EV 😅
@illbeyourmonster35912 ай бұрын
And how many chargers are there for those in rural areas in your fantasy world?
@Primetimetoons-bx2mj2 ай бұрын
And where might a charger for that be? And how long do you have to sit and read a book while it charges enough for it to make it home. Oh you must have a gas powered generator in the trunk...
@BarkLife2 ай бұрын
So I could not be able to find any fuel? Rural areas don't have recharge stations in Mt and idaho
Пікірлер
Cant wait bro!!
I can't wait to hear thus thing in action!!!
Try Gear oil
Letssss goooooo
Going to try and make a big push after work today who knows might be able to get it close to starting or started
The MKV Supra is a goat. IYKYK. Objectively speaking, the MKIV does not even compare in any performance metric to the MKV.
It's hard to compare spec to spec on a car that's 30+ years apart. However, there are certain things having driven both and owned a mkiv for 16 years that the mkiv has over the mk5. With that being said, there are some cool things to the mkv, but at the end of the day, I would still own a mkiv over the mkv. I own neither as I sold my mk4 last year.
Roll some coal brother
Lol
sounds amazing i’m about to run the same setup. any problems with the hks bov?
No great bov super fast response
I initially was snooping Amazon for a drop in filter replacement in my QX80 but what I had ended up doing was ordering a 3.5" maf tube for the Nissan gtr. I then ordered a 3.5" aluminum pipe and put a cone air filter on the end. I kept the factory slip tube from the throttle body and just deleted the airbox. It's not much a difference than a drop in filter but I'd like to think so with the massive conehead 😅
Lol, yeah, I think a good portion of an intake is for aesthetics and that sweet induction noise.
@@BarkLife true that! It explains why this was my 1st modification to the truck but the engine can only pump so much air. I think for the money, Id save it and put it elsewhere like in a handheld flash tuner or even a piggyback ecu from Uprev would be well worth it! Then convert to run E85 fuel for more timing and leaner a/f ratio but thats just my two cents.
@@BarkLife cams also go along way in these motors. Jim Wolf is somewhat local and I've been eyeing their CS2 cam kit with beehive springs on intake side 🙃
Looks amazing
Thanks
Sweet but ugly lol. Sounds like aomwthing i would say. Build looks killer. Keep at it
Lol yeah and thanks :)
Piggybacks work on the older stuff but once you get into the 2jzge vvti the tune drifts to bad and constant returning is required.
This is true, unfortunately. 96 and new jz . Leaving it in open loop can help with this.
On the 2000 2001 GS300 the hot ticket is using a Aristo TT ECU. It pretty much is plug and Play just got to move a couple of wires and add a couple of wires
The Toyota MR2 is my dream car but unfortunately in my country only 10 were brought
That is a bummer. What country?
@@BarkLife Sri Lanka
@@BarkLife my uncle had a mk4 in Australia but in Sri Lanka they are pretty rare only 23 were brought but you can buy one here for 30k thousand dollars which is kinda cheaper than USA right but it's REALLY hard to find a supra for sale here
Wow I'm 12 years old and when I grow up I wanna study motor engineering but unfortunately my dad does not have interest in cars that much but I know a lot about cars the car you are building is a Toyota MR2 with a 2.2 litre 5s-Fe engine producing 138 HP stock I know how a cylinder works and the function of valves and I spend countless hours seeing videos about cars I wish I had a dad like you but maybe one day I can make a car with my son thanks and may god bless you for being a lovely father ❤
Mad props for being so knowledgeable already! Share your passion with those around you and you'll find mentors and friends to learn from along the way. My Dad and I didn't work on cars together either, but it's great to find other common ground too. For my dad and I it was fishing and work projects, but sharing what you know with your own son is more rewarding than I can say. Awesome to see guys like you with initiative taking the torch for the next generation.
These guys aren’t just wrong, they’re confidently stupid.
18 all day
Those are sick!!!
Love MR2’s
@helenebabineau7103 thank you so much for watching. I sold my mkiv supra because I never drove it or worked on it over my mr2. The mr2 is getting huge upgrades the next few days
@@BarkLife thanks for taking the time to reply, I have a 1992 SW20 MR2 with a 5sFe engine and I’m going to mod it soon. My family bought this car back in 1996 so this is the oldest time I kept a car for.
@@helenebabineau7103 That is amazing :) so cool to have something that has been passed down in the family. Mr2 is such a worth while car to keep and restore. Such a unique platform :) If you end up making videos about it count me in for a sub:)
Thanks for sharing your video . I plan to buy this phone in 2024 .your are a good man
I see the egr delete
That is a a4
what makes you say that ? it is 100% 3 lobes on both cams :) ty for watching
We’ve got a 2003 GS300 that we are planning to boost, this is very informative 🤙🏼
So glad it was helpful :)
did you change the sprocket at all? I'm trying to source a #420 chain sprocket for the rear
No stayed with stock
I actually have the same watergate at this one for my is300. By chance could you share where you bought that spring at? I am also aiming for lower boost
I bought the springs off cx racing if I recall.
Did the kit come with new arp flywheel bolts ?
SUBBED . Thank you brother !!!
Thanks for the sub! I hope the video helped
Where can I find a new sunroof? I'm really just looking for a seal but I can't find it anywhere
Dealer would probably have the seal my local junkyard had the glass and seal
@@BarkLife Thanks so much! I spoke with the dealer, they said it would $150 for just the seal 🤯! So I'll definitely be taking a look at the junk yard! Much appreciated 🙏🏾
Is that a supra mk4😮😮
Hi love the go kart series. I want to do the chassis exetnsion for my go kart but i am not too sure what tube to use or how to mount the seat. thankyou.
I will try to do a more in depth video explaining material used
@@BarkLife thanks
when you cut that bolt off to remove the exhaust do you have to remove any of the pipes going forward towards the motor to remove the engine or just from where u cut back?
I pulled the engine with the header in place if that's what you're asking
What model hks is that?
Ssqv
It. BE like that😂
Super excited
I cant disagree with you, I had a 1991 sw21 mr2 and I loved it with the 5sfe, but I also had a 1997 celica GT 5sfe, I also had a 1994 ST 7afe, and now a 1993 prizm 7afe, and am considering buying another celica GT 5sfe, we shall see
removing the idler pulley is not necessary to drop the motor right?
Correct
Have a standalone? Best car I've ever had btw, these are pure treasures that last forever with the proper care of course...plan on going turbo someday
That car had a piggyback. My mr2 has standalone
If you have an NA mr2, you will have to spend 5k to get a transmission plus axles and swap kit. Only makes sense if you already have mr2 turbo
I have a 91 na and I lsd e153 out of a gen 3 jdm mr2 swapped it. I also had a 3sgte I swapped in. My total expense for everything was 2500 with motor hubs everything. I'm now k swap with e153.
any updates?
Life has happened and I haven't finished the build but it is 95 % complete.
How did you do it
Literally just unhooked everything and put the cable that comes from the cabin to the throttlebody
The thing I like about this is that a lap top isn’t needed. I wished all piggyback ecu could be like this. Maybe have its own touch screen monitor.
Yeah definitely simple to use no replacement for standalone though
American prejudicism the scenario we live in nowadays
How so?
@@BarkLife people with predetermined notions against rural stations having inferior fuel compared to metropolitan areas
@frankmains5698 I grew up living in the most rural areas. Just like a cars gas tank, if you have long periods before a refill, the tank has a chance to build condensation. If a station isn't heavily used, the more water that builds up. Not to mention, modern fuels are not as stable.
@@BarkLife u prejudicial me replys ditto to City cars that rarely get driven excessively, they sit around with their gas tanks confensating water. Ditto the gas stations in Chicago ghettos that have highest prices in USA, where one is unwilling to spend the $, or the fact the area is so crime ridden that your afraid to be in public, hence the bars on the window and doors in. Addition to the fact that there is a sign on the locked gate that says closed, went to score be rite back. Does the gas sit around in those tanks subject to modern instabilities? So, what's very rural to you West Texas, new Mexico Indian reservation, 40 Miles East or West of Bangor Wisconsin?
@frankmains5698 nw Montana/Yaak. I grew up with wood fire heat/cooking and propane fridge. The average populations in the towns I'm talking about are sub 500 people and 40 miles from the next nearest "town". Most people who have equipment or toys have their own 500 gallon above ground fuel tanks. Getting gas at an off the beaten path does have a higher likelihood of bad gas, especially since diesel is the bulk seller in these areas. Simply a sitting/volume of sitting gas issue. How often are fuel deliveries, etc. Any hoot not looking to argue my point is simply gas prices are out of hand. I enjoy lower prices then most areas due to my geographic/polical location not over taxing/regulating. Have a good day
I live in a rural area. Between the commuters, lawn mowers, farmers, and kids on dirt bikes, there's no way gas ever just sits around at a small station here. Gas is between 2.97 and 3.15. i think you're gauge is messed up. Do you really believe that the gas just sits there while the clerk plays banjo on the porch? That's literally dumb. Country people use gas like crazy. And it better be good or there's hell to pay if bubba gets bad fuel in his F-350.
I grew up in the middle of nowhere northern Montana :)
Welcome.to Europe
Yeah, Europe prices have gotten out of hand. america is following similar policies, so we are right behind you guys.
@BarkLife in the uk we have always paid just over twice what the usa pay. It's normal
The problem with gas prices is a world wide problem. Try living in Canada with their gas prices.
It wasn't a problem in the USA until Biden drained our reserves and sold them to China. We were self sufficient didn't need foreign fuel we had our own.
Yeah gas is outa hand
RAM, does not have 11 gal tank but 3x
What ram?
trump 2024!!!!
Dork
You know you are getting old when you try to apply 1992 prices to 2024.
3 years ago it was 1.74 a gallon instead of nearly 4 :(
Your dirty finger is ridiculous, what the heck?
Yeah lol working on cars and kids gokarts all day
Ooh Muffy I do want any of that country bumpkin gas eww🧐
Unfortunately rual areas are disappearing.
Very true
2 letters. EV 😅
And how many chargers are there for those in rural areas in your fantasy world?
And where might a charger for that be? And how long do you have to sit and read a book while it charges enough for it to make it home. Oh you must have a gas powered generator in the trunk...
So I could not be able to find any fuel? Rural areas don't have recharge stations in Mt and idaho